Lathem 5000E Users Manual *5000E English

5000E to the manual 95201ee5-aadf-41e6-838f-fd307f81e2b8

2015-02-09

: Lathem Lathem-5000E-Users-Manual-570425 lathem-5000e-users-manual-570425 lathem pdf

Open the PDF directly: View PDF PDF.
Page Count: 23

DownloadLathem Lathem-5000E-Users-Manual- *5000E English Manual  Lathem-5000e-users-manual
Open PDF In BrowserView PDF
Lathem Time Corporation

WARNING
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his or her own expense.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS A LIMITS FOR RADIO NOISE EMISSIONS
FROM DIGITAL APPARATUS AS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE
CANADIAN DEPARTMENT OF COMMUNICATIONS.
LE PRÉSENT APPAREIL NUMÉRIQUE N'ÉMET PAS DE BRUITS RADIOÉLECTRIQUES DÉPASSANT LES
LIMITES APPLICABLES AUX APPAREILS NUMÉRIQUES DE CLASSE A PRESCRITES DANS LE
RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE ÉDICTÉ PAR LE MINISTÈRE DES
COMMUNICATIONS DU CANADA.

1. The details of this User's Manual are subject to change even without previous notification.
2. This User's Manual has been prepared with the utmost care to cover all aspects of the time
clock's use.
3. Be sure to use your time clock after you have fully understood the hardware and software
specifications and limits.
4. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,
in any form or by any means, mechanical, photocopying, recording or otherwise.

This User's Manual and its contents are copyrighted by
LATHEM TIME CORP. with all rights reserved.

Lathem Time Corporation
www. lathem. com
(800) 241-4990

Thank you for purchasing our time clock.
For safe and proper operation, please carefully read the manual
before using the time clock and save it for reference.

FEATURES:

Main applications : Payroll/job cost recorder, time stamp or numbering
machine.
Quartz time clock
Dot matrix printer
Perpetual calender
Automatic daylight saving time
4-way print activation
Automatic
Manual
Semi-automatic
Combination
Adjustable print position
Prints in 8 languages
Prints numbers/date

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Alphanumeric printing
Selectable 4-digit
year imprint
12 or 24-hour format
Regular minute, 1/10, 1/100 or
5/100 of an hour
Password for program protection
Digital LCD display (Date, Hour,
Minute, Day of the Week indication)
Rigid enclosure, wall or desk top
mount
Full power reserve (optional)

Caution:
Avoid placing the unit in environments that are:
• humid or dusty.
• exposed to direct sunshine.
• subject to frequent or continuous vibrations.
• outside the temperature range between -5˚ and 45˚C
(+25˚and 113˚F)
• affected by chemicals or ozone.
Place the time clock close to the wall outlet so that it is easily
accessible to disconnect.
For questions about the operation of this time clock, or to order
supplies and accessories, please contact Lathem Time at
(800)241-4990.
1

BEFORE USING YOUR TIME CLOCK
Package Contents
Unpack the time clock and check its contents to ensure that the time clock unit and all
accessories as shown below are included.

ATTACHED ACCESSORIES
• Time clock

• Ribbon cassette
...................1 ps.

• The ribbon casette is installed
at the factory.

• Keys ......................2 pcs.

Wall-mount holes

• Wall-mount fitings
Screw .................4 pcs.
Template .........1 sheet.
AC Power Plug
(230VAC model)

AC Power Plug
(120VAC model)

2

CONFIGURATION
LOCATION OF NAME
It is important to become familiar with the time clock before setting it up and using
it.
Key hole

RESET switch
DIP switch
LCD panel

Top caae

Control keys

Ribbon
Cassette

Locating mark
Print head
Push bar
YEAR
MONTH
DAY

DIPSW1

Ribbon holder

DIPSW2
MO

SW5

RESET

Print position adjuster
The print position from
the card edge is adjustable
by pressing and sliding the
print position button on
outside bottom.

HOUR
MINUTE

MODE

TU

WE

SW4

YEAR

TH

SW3

FR

END
DAYLIGHT
SAVING

START
DAYLIGHT
SAVING

SA

SW2

HOUR MINUTE
MONTH
DAY

NUMBER
REPEAT
TIMES

INITIAL
NUMBER
SET

COMMENT

SU

SW1

SET

PRINT POSITION ON TIME CARD

30mm
JAN31A

15mm

JAN 31AM12:00

JAN 31AM12:00

The print position from the card edge is adjustable by
pressing and sliding the print position button located
on the right outside bottom of the recorder. Maxuim
distance from edge of form to print is approximately
1 3/16"(30mm).

3

QUICK EASY SETUP
Step 3

Step 1

Plug the AC cord into the AC outlet.
When plugged in the LCD panel
indicates the current time. It is now
ready to be adjusted if necessary.

Unlock the key and remove the
top case.

CA

AC Outlet

UT

IO

N

Step 4

Step 2

Insert a card.

Remove the PROTECTION PAD.
Remove the PROTECTION PAD
before you plug the AC cord into
the AC outlet.

CA

CA

UT

UT

IO

N

IO

N

JAN 31

AM12:00

PROTECTION
PAD

Print example

PLEASE NOTE: If a time card is inserted and
removed too quickly, the print head will move,
but no imprinting will occur. This feature is
designed to protect and maintain the life of your
printer. Please hold the time card in the recorder
until the print head movement is complete.
4

HOW TO PROGRAM THE CLOCK
To enter the program setting mode, you should plug the AC power cord into the
AC outlet and remove the cover. Thereafter press the 5 tactile switches, SW5 to
SW1.
< > indicates pressing a tactile switch. Pressing longer will realize faster
increments.

YEAR
MONTH
DAY

DIPSW1

HOUR
MINUTE

DIPSW2
MO

TU

WE

TH

FR

END
DAYLIGHT
SAVING

START
DAYLIGHT
SAVING

SA

NUMBER
REPEAT
TIMES

INITIAL
NUMBER
SET

COMMENT

SU

Program modes

SW5

RESET

MODE

SW4

YEAR

SW3

SW2

HOUR MINUTE
MONTH
DAY

SW1

SET

Control keys

Function of 5 control keys
SW5 : You can select the desired program setting mode by pressing this SW5 key.
Selected program setting mode is indicated by the " " mark on the display.
SW4 , SW3 , SW2 : When you press the SW4 , SW3 and SW2 keys, you can
increment the set value.
SW1 : You can set the value selected on the display by pressing the SW1 key.
Thereafter you press this SW1 key again, you can return the clock to the normal
operation mode.

5

SETTING THE TIME
Step 1

Step 3
MO

HOUR
MINUTE

TU

WE

TH

FR

SA

SU

SW2

MINUTE
DAY
MO

TU

WE

TH

FR

SA

SU

SW5

MODE

Press the [SW5 : MODE] key once, the
"HOUR MINUTE" arrow flashes.

Press the [SW2: MINUTE / DAY] key
until the correct minute appears.
Keeping the SW2 pressed, advances the
minute automatically. Longer pressing
speeds advancement.

Step 4
Step 2

MO

TU

WE

TH

FR

SA

SU

WE

TH

FR

SA

SU

SW1

SET

Example :
Set to Morning 10:08 AM
MO

TU

SW3

HOUR
MONTH

Press the [SW3 : HOUR / MONTH] key
until the correct hour appears.
The seconds are automatically reset to 00.
Keeping the SW3 pressed, advances the
hour automatically.

Press the [SW1: SET] key after checking
the desired time appears on the LCD.
The seconds are 00.
Press [SET] accordingly to a time signal.
The unit is now set to correct time.

Step 5
MO

TU

WE

TH

FR

SA

SU

SW1

SET

Press the [SW1:SET] key again.

6

SETTING THE DATE
Step 1

Step 4
MO

YEAR
MONTH
DAY

TU

WE

TH

FR

SA

SU

SW2

MINUTE
DAY
MO

TU

WE

TH

FR

SA

SU

SW5

MODE

Press the [SW5 : MODE] key twice, the
"YEAR / MONTH / DAY" arrow flashes.

Press the [SW2: MINUTE / DAY] key
until the correct day appears.
Keeping the SW2 pressed, advances
the day automatically. Longer pressing
speeds advancement.

Step 5

Step 2

MO

TU

WE

TH

FR

SA

SU

SW1

Example : set to 21st Octobr, 2001
MO

TU

WE

TH

FR

SA

SU

SET

SW4

YEAR

Press the [SW4 : YEAR] key until the
correct year appears.
Keeping the SW4 pressed, advances the
year automatically. Longer pressing
speeds advancement.

Press the [SW1: SET] key after checking
the desired year, month and day on the
LCD.

Step 6
Step 3
MO

TU

WE

MO

TH

FR

SA

SU

TU

WE

TH

FR

SA

SU

SW1

SW3
SET

HOUR
MONTH

Press the [SW1:SET] key again.

Press the [SW3 : HOUR / MONTH] key
until the correct month appears.

7

SETTING THE STARTING DAYLIGHT SAVING TIME
When the daylight saving time is set, one hour will be automatically added to the day advance
time on the starting date and, similarly, one hour will be automatically subtracted on the ending
date of the daylight saving time.

Step 1

Step 4
MO

START
DAYLIGHT
SAVING

TU

WE

TH

FR

SA

SU

SW2

MINUTE
DAY
MO

TU

WE

TH

FR

SA

SU

SW5

MODE

Press the [SW5:MODE] key three times,
the "START DAYLIGHT SAVING" arrow
flashes.
Example :
Starting from Second of April, 2001

Press the [SW2:MINUTE / DAY] key
untli the correct day appears.
Keeping the SW2 pressed,advances the
day automatically. Longer pressing
speeds advancement.

Step 5
MO

TU

WE

TH

FR

SA

SU

SW1

Step 2
SET
MO

TU

WE

TH

FR

SA

SU

SW4

YEAR

Press the [SW4:YEAR] key until the
correct year appears.
Keeping the SW4 pressed,advances the
year automatically, Longer pressing
speeds advancement.

Press the [SW1:SET] key after checking
the desired year, month and day on the
LCD.

Step 6
MO

TU

WE

TH

FR

SA

SU

SW1

SET

Step 3
MO

TU

WE

Press the [SW1: SET] key again.
TH

FR

SA

SU

SW3

HOUR
MONTH

Press the [SW3 : HOUR / MONTH] key
until the correct month appears.

8

If you do not use the daylight
saving time function, set the
month value to 00.

SETTING THE ENDING DAYLIGHT SAVING TIME
Step 1

Step 4
MO

END
DAYLIGHT
SAVING

TU

WE

TH

FR

SA

SU

SW2

MINUTE
DAY
MO

TU

WE

TH

FR

SA

SU

SW5

MODE

Press the [SW5: MODE] key four times,
the "END DAYLIGHT SAVING" arrow
flashes.
Example:
End on 28th of October, 2001

Press the [SW2: MINUTE / DAY] key
until the correct day appears.
Keeping the SW2 pressed, advances
the day automatically. Longer pressing
speeds advancement.

Step 5
MO

TU

WE

TH

FR

SA

SU

Step 2
MO

TU

WE

SW1

SET
TH

FR

SA

SU

SW4

YEAR

Press the [SW4: YEAR] key until the
correct year appers.
Keeping the SW4 pressed, advances
the year automatically. Longer pressing
speeds advancement.

Press the [SW1: SET] key after
checking the desired year, month and
day on the LCD.

Step 6
MO

TU

WE

TH

FR

SA

SU

SW1

SET

Step 3
MO

TU

WE

Press the [SW1:SET] key again.
TH

FR

SA

SU

SW3

HOUR
MONTH

Press the [SW3 : HOUR / MONTH] key
until the correct month appears.

9

SETTING THE NUMBER
INITIAL NUMBER SET

Step 1
MO

TU

WE

Step 1

INITIAL
NUMBER
SET

TH

FR

SA

SU

NUMBER REPEAT TIMES SET

SW5

MO

TU

WE

NUMBER
REPEAT
TIMES

TH

FR

SA

SU

MODE

MODE

Press the [SW5: MODE] key five times,
the "INITIAL NUMBER SET" arrow
flashes.

Press the [SW5: MODE] key six times,
the "NUMBER REPEAT TIMES" arrow
flashes.

Example:
Setting initial number to 675829.

Example:
Setting 2 times repeat.
The repeat times can be set to 0 to 9.

Step 2
MO

TU

WE

SW4

Step 2
TH

FR

HOUR
MONTH

SA

SU

MO

WE

TH

FR

SA

SU

SW2

SW1

MINUTE
DAY

SET

MINUTE
DAY

SET

Step 3
TU

WE

SW1

Press the SW2, 3 or 4 key until the
correct number appears.
Longer pressing speeds advancement.
Press the [SW1: SET] key after checking
the desired number on the LCD.

MO

TU

SW2

SW3

YEAR

Press the [SW2: MINUTE/DAY] key
until the correct number appears.
The repeat times can be selected 0 to 9.
Press the [SW1: SET] key after checking
the desired number on the LCD.

Step 3
TH

FR

SA

SU

SW1

SET

Press the [SW1: SET] key again.

10

SW5

MO

TU

WE

TH

FR

SA

SU

SW1

SET

Press the [SW1: SET] key again.

N U MB E R R E S ET
At the time of chenging the date, the number is automatically reset to "0".

Step 1

Step 3
MO

TU

WE

TH

Plug the AC cord out from the AC outlet.
Confirm the LCD disappeared.
If optional Ni-Cd battery is used, it
should be taken off.
OFF

FR

SA

SU

SW2

SW1

MINUTE
DAY

SET

Press the [SW2: MINUTE/DAY] key
until the correct number on the LCD.
Press the [SW1: SET] key after checking
the desired number on the LCD.

Step 2
Step 4
ON
SW5

MO

TU

WE

TH

FR

SA

SU

SW1

and
MODE

SET

Press the [SW1: SET] key again.
Plug the AC cord into the AC outlet
while pressing the [SW5: MODE] key.
Then " 0 " is mentioned on the LCD.
MO

TU

WE

TH

Display

FR

SA

SU

Number reset
N/A
YES

11

PREPROGRAMED COMMENTS SETTING
Step 1
MO

TU

WE

Step 3

COMMENT

TH

FR

SA

SU

MO

SW5

Press the [SW5: MODE] key seven
times, the "COMMENT" arrow flashes.
Example:
Setting the comment to SENT.

Step 2
TU

WE

TH

FR

SA

SU

SW2

SW1

MINUTE
DAY

SET

Press the SW2 key until the correct
number appears.
No.

1

2

Comment RCVD SENT

3
IN

4

5

6

7

OUT CMFD FILED PAID

• The comment will change according to country
selection by DIP switch 2-6, 7 and 8.

Press the [SW1:SET] key after checking
the desired number on the LCD.

12

WE

TH

FR

SA

SU

SW1

SET

MODE

MO

TU

Press the [SW1: SET] key again.

SETTING THE PASSWORD
When the password is set, you are asked to enter it. If the password you entered does not
coincide with the setting, you can not change the setting values.
You may set a password by any 4-digit number from 0001 to 9998.
Note a number "00 00" and "99 99" can not be used as a password.

REGISTERING THE PASSWORD

Step 1

Step 3
MO

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

DIPSW1

DIPSW2

Set DIPSW 1-2, 4, 5, 8 and DIPSW 2-1,
3, 5, 7, 8 to ON. Then display shows
"00 00".
TU

WE

TH

WE

TH

FR

SA

SU

DIPSW
2-1, 3, 5, 7
and 8: ON

DIPSW
1-2, 4, 5and
8: ON

MO

TU

FR

SA

SW2

MINUTE
DAY

Press the [SW2: MINUTE/DAY] key
and assign the desired numbers to the
last two digits.

Step 4

SU
MO

TU

WE

TH

FR

SA

SU

SW1

SET

Press the [SW1: SET] key. " " located
right-below on the LCD will disappear
that confirms password setting.

Step 2
Example: Password "2878"
SW3

HOUR
MONTH

Press the [SW3: HOUR/MONTH] key
and assign the desired numbers to first
two digits.

Step 5
Set DIP SW1, and 2 as desired position.
MO

TU

WE

TH

FR

SA

SU

13

HOW TO CHANGE SETTINGS WHEN PASSWORD IS SET
Once password is set, you have to enter the password for changing any settings.
"99 99" will be displayed when you press the [SW5: MODE] key before entering
password.

Step 3

Step 1
MO

TU

WE

TH

FR

SA

SU

HOUR
MINUTE

SW5

MODE
MO

TU

WE

TH

FR

SA

SU

SW1

Press the [SW5: MODE] key.
SET

Press the [SW1: SET] key.

Step 2
Example: Password "2878"
MO

TU

WE

TH

FR

SA

Step 4

SU

SW3

SW2

HOUR
MONTH

MINUTE
DAY

Press the [SW3: HOUR/MONTH],
[SW2: MINUTE/DAY] key until the
correct number appears.

14

Select desired setting mode by pressing
the [SW5: MODE] key. Then make
settings as explained.

C A N C E L IN G T H E PA SSW ORD
The code "00 00" must be entered to cancel the password.

Step 1

Step 4
MO

1 2 3 4 5 6 7 8

DIPSW2

Set DIPSW 1-2, 4, 5, 8, and DIPSW 21, 3, 5, 7, 8, to ON. Then display
shows "99 99".
WE

TH

1 2 3 4 5 6 7 8

DIPSW1

TU

WE

DIPSW
2-1, 3, 5, 7
and 8: ON

DIPSW
1-2, 4, 5and
8: ON

MO

TU

TH

FR

SA

FR

SA

SU

SW3

SW2

HOUR
MONTH

MINUTE
DAY

Press the [SW3: HOUR/MONTH],
[SW2: MINUTE/DAY] key until
"00 00" number appears.

SU

Step 5
MO

TU

WE

TH

FR

SA

SU

Step 2

SET

Example: Cancel Pasword "2878"
MO

TU

WE

SW1

TH

FR

SA

SU

SW3

SW2

HOUR
MONTH

MINUTE
DAY

Press the [SW3: HOUR/MONTH],
[SW2: MINUTE/DAY] key until the
correct number appears.

Press the [SW1: SET] key.
" " located right-below on the LCD
will disappear that confirms password
cancelation.

Step 6
Set DIPSW 1 and 2 as desired position.
MO

TU

WE

TH

FR

SA

SU

Step 3
MO

TU

WE

TH

FR

SA

SU

SW1

SET

Press the [SW1: SET] key.

15

PRINT METHOD SETTING
LEFT OR RIGHT PRINT

TYPE OF AN HOUR
MO

TU

WE

TH

FR

SA

SU

JUN 13 18:08
DIP switch 2-5:ON
MO

TU

WE

TH

FR

SA

SU

JUN 13

PM

6:08

DIP switch 2-5:OFF

Right

31

JAN
31

JAN

DIP switch 1-7:ON

MA 1
2:00

AM
12:0
0

Left

Time can be displayed on a 12-hour (AM,
PM) or 24-hour basis. DIP switch 2-5 is
used for selection.
Print also changed accordingly.

DIP switch 1-7:OFF

The DIPSW1-7 is used to select whether to
print flush right or flush left on the card.

PRINT SWITCH

LEADING 0
Leading 0 for hours less than 10 may be
shown (enable) or suppressed (disable) on
print.
DIP switch 2-4:ON

DIPSW1-8:OFF
DIPSW2-1:OFF

Automatic print
Inserting the card automatically initiates
printing.

JUN 13
MO

TU

WE

TH

FR

SA

AM

08:08

SU

Print Example

DIPSW1-8:OFF
DIPSW2-1:ON
Semi-automatic print
Only with the card inserted, pressing the
push bar starts printing.

JUN 13

AM

8:08

DIP switch 2-4:OFF

DIPSW1-8:ON
DIPSW2-1:OFF
Manual print
Even with no card, pressing the push bar
starts printing.
DIPSW1-8:ON
DIPSW2-1:ON

Combination
Either inserting the card or pressing the
push bar starts printing.

TYPE OF MINUTES
Minute is printed in a unit which is obtained
by dividing an hour by 60, 100, 20 or 10.
DIP switches 2-2 and 2-3 are used for
selection.
Print contents

Print
Example

To divide an hour by 60 : 0,1,2...58,59,0,1,2....

JAN 1 AM12:40

To divide an hour by 100 : 0,1,2...98,99,0,1,2.... JAN 1 AM12.67
To divide an hour by 20 : 0,5,10...90,95,0,5,10... JAN 1 AM12.65
To divide an hour by 10 : 0,1,2...8,9,0,1,2....

16

JAN 1 AM12.6

NUMBER OF YEAR DIGITS

TYPE OF LANGUAGE

Year can be printed either 2 digits
or 4 digits. DIPSW 1-6 is used for
the selection.

You can choose 8 differents
languages for printing month, day
of the week, and preprogrammed
comments.Use DIPSW 2-5 ~ 2-8
for setting.

DIPSW1-6: OFF

'01 OCT 21 AM10:08
Language
DIPSW1-6: ON

2001 OCT 21 AM10:08

Example

English

DEC 21 AM10:08

Spanish

DIC 21 AM10:08

German

DEZ 21 AM10:08

French

DEC 21 AM10:08

Italian

DEC 21 AM10:08

Portuguese

DEZ 21 AM10:08

Roman

XII 21 AM10:08

Numeric

12-21

AM10:08

17

WALL MOUNTING
Step1

Four screws

Step3

• Leave screw heads
about 1/8" from wall.

Step2

• Put on the top case.

• Select wall area near AC outlet.
• Mount the Time Recorder on
wood or a surface which can
support weight (dry wall will
not support unit).
• Remove the top case
and hang on the wall.

REPLACING RIBBON CASSETTE
1. Carefully slide the exposed ribbon under
the print head.
2. Push cassette with the projection into the
ribbon cassette holder until snapped into
place.
3. Turn the ribbon feed knob clockwise until
the ribbon is taut.

Ribbon cassette
holder

Projection

18

DIP SWITCH SETTING
DIPSW1

DIPSW2

ON

1

ON

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

Print example

Meaning

JAN 31 AM12:00

Mon, Day, Hour, Min

31 JAN AM12:00

Day, Mon, Hour, Min

JAN 31 '00 AM12:00

Mon, Day, Year, Hour, Min

31 JAN '00 AM12:00

Day, Mon, Year, Hour, Min

'00 JAN 31 AM12:00

Year, Mon, Day, Hour, Min

'00 JAN 31 AM12:00:00

Year, Mon, Day, Hour, Min, Sec

'00 JAN 31

Year, Mon, Day

JAN 31

Mon, Day

31 AM12:00

Day, Hour, Min

MO, 31 AM12:00

DOW, Day, Hour, Min

MO, 31 JAN '00

DOW, Day, Mon, Year

000000 JAN 31 '00

Num, Mon, Day, Year

000000 31 JAN '00

Num, Day, Mon, Year

000000 '00 JAN 31

Num, Year, Mon, Day

JAN 31 '00 000000

Mon, Day, Year, Num

31 JAN '00 000000

Day, Mon, Year, Num

'00 JAN 31 000000

Year, Mon, Day, Num

000000 31 AM12:00

Num, Day, Hour, Min

000 JAN 31 AM12:00

Num, Mon, Day, Hour, Min

0000 '00 JAN 31 AM12:00 Num, Year, Mon, Day, Hour, Min

: OFF

00000 '00 JAN 31 0:00

Num, Year, Mon, Day, Hour, Min

000000

Num

RCVD JAN 31 '00

Com, Mon, Day, Year

RCVD 31 JAN '00

Com, Day, Mon, Year

RCVD '00 JAN 31

Com, Year, Mon, Day

JAN 31 '00 RCVD

Mon, Day, Year, Com

31 JAN '00 RCVD

Day, Mon, Year, Com

'00 JAN 31 RCVD

Year, Mon, Day, Com

RCVD 31 AM12:00

Com, Day, Hour, Min

ABC HOTEL

Customized Comments

: ON

19

DIPSW1

DIPSW2

1

ON

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

Print example

Meaning

'00 JAN 31 AM12:00

Types of Year (2 digits)

2000 JAN 31 AM12:00

Types of Year (4 digits)

JAN 31 AM12:00

Flush Left Print

JAN 31 AM12:00

ON

Flush Right Print
Automatic
Manual
Combination
Semi-automatic

JAN 31 AM12:40

60 Min/Hour

JAN 31 AM12.67

100 Min/Hour

JAN 31 AM12.65

20 Min/Hour

JAN 31 AM12.6

10 Min/Hour

JAN 1 PM3:00

Zero Disabled

JAN 01 PM03:00

Zero Enabled

JAN 31 PM3:00

AM/PM

JAN 31 15:00

24 Hours

JAN 31 AM12:00

English

ENE 31 AM12:00

Spanish

JAN 31 AM12:00

German

JAN 31 AM12:00

French

GEN 31 AM12:00

Italian

JAN 31 AM12:00

Portuguese

31 AM12:00

Roman

1-31 AM12:00

Numeric
Password

: OFF

: ON

NUMBER OF YEAR DIGITS
LEFT OR RIGHT PRINT
PRINT SWITCH
TYPE OF MINUTES
LEADING 0
TYPE OF AN HOUR
TYPE OF LANGUAGE

20

SPECIFICATIONS
MAIN FUNCTION

OTHER SPECIFICATIONS

Calendar

Year up to 2099
(Automatically adjusted to leap year)

Power supply

Clock accuracy

Monthly accuracy ±15 seconds
(at ordinary temperatures)

Display

Digital LCD with 7 segments
Date, Hour, Minute and day
of the week indication

Daylight saving time

Auto

Power consumption
110/120VAC.............. 20 VA max.while printing
............... 4 VA while idling
............... 0.2 A max.while printing
220-240/230VAC....... 20 VA max.while printing
.............. 4 VA while idling
.............. 0.1 A max.while printing

Preprogramed
comments

Selectable 7 different kinds

Temperature

Operating -5˚C – 45˚C

Humidity

Customized
comments

Available up to 3 lines

Operating 20% – 80% RH
(No condensation)

Dimensions

DIP switch

16 poles

6 27/32" x 6 3/16" x 8 3/16"
(174mm(W) x157mm(D) x208mm(H))

Memory Backup

3 year memory backup by
lithium battery.

Weight

Approximately 5.5lb.(2.5 Kg)

PRINT FUNCTION

110 VAC, 120 VAC
230 VAC, 220-240 VAC

OPTION

Impact Dot Matrix - 9pins
4-way Card activated
automatic, manual, semiautomatic or combination

Ribbon cassette

VIS6002

Battery

VIS6001
Available of 200 prints or 72
hours during no electricity.

Print position/
direction

Adjustable trigger trip
Right/Left print by DIP
switch

Hour & minute
format

12 or 24-hours format,
regular minute, 1/10, 1/100
or 5/100 of a hour

In case of power failure
Even if a power failure has occurred, the optional
built-in battery backs up to 72 hours (roughly three
days), provided that the battery cells are fully
charged.

Multiple copies

Original + 4
(Maximum thickness 3mm
or less)

Ribbon cassette

Carry-on cassette type
fabric ink ribbon

Print method

No printing battery capacity
The display is flashing when detecting the low
battery capacity. Please stop printing until AC
power supply is resumed.
If you still keep printing, the time recorder will
hang up. When hung up, you have to press the
RESET switch on the control panel by using a pair
of tweezers. In this case, the calendar clock is
cleared.

Bescheinigung des Herstellers/Importeurs
Dies Gerät entspricht den Bedingungen der Niederspannungs-Vorschrift 73/23/EEC und
dem EMVG nach 89/336/EEC.
This unit complies with the Low Voltage Directive 73/23/EEC and the EMC Directive
89/336/EEC.
Maschinenlärminformationsverordnung 3. GSGV,18.01.1991:Der arbeitsplatzbezogene
Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß ISO 7779.
Die zugeho¨rige Steckdose muß nahe beim Gerät angebracht und leicht zugänglich sein.

1

21



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2001:10:12 11:30:58Z
Modify Date                     : 2003:05:08 11:55:24-04:00
Page Count                      : 23
Creation Date                   : 2001:10:12 11:30:58Z
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : Shane Aycoth
Mod Date                        : 2003:05:08 11:55:24-04:00
Metadata Date                   : 2003:05:08 11:55:24-04:00
Creator                         : Shane Aycoth
Title                           : *5000E English Manual
EXIF Metadata provided by EXIF.tools

Navigation menu