Lattice Semiconductor SII-SK63102 wirelesshd transmitter User Manual Manual Revised

Download:
Mirror Download [FCC.gov]
Document ID	1702969
Application ID	d3K+T/zyAOo+U+Y6q4TDIw==
Document Description	Manual - Revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.8kB (534963 bits)
Date Submitted	2012-05-22 00:00:00
Date Available	2012-11-15 00:00:00
Creation Date	2012-05-20 10:29:25
Producing Software	doPDF Ver 7.2 Build 355 (Windows 7 Enterprise Edition (SP 1) - Version: 6.1.7601 (x64))
Document Lastmod	0000-00-00 00:00:00
Document Title	Manual - Revised

Quick Start Guide – OEM Installation
SiI-SK63101 and SiI-SK63102
Quick Start Guide – OEM Installation
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
May 2012
Copyright Notice
Copyright ©2012 Silicon Image, Inc. All rights reserved. The contents of these materials contain proprietary and
confidential information (including trade secrets, copyright, and other Intellectual Property interests) of Silicon Image,
Inc. or its affiliates. All rights are reserved and contents, (in whole or in part) may not be reproduced, downloaded,
disseminated, published, or transferred in any form or by any means, except with the prior written permission of Silicon
Image, Inc. or its affiliates. You may not use these materials except only for your bona fide non-commercial evaluation
of your potential purchase of products and/or services from Silicon Image or its affiliates; and only in connection with
your purchase of products or services from Silicon Image or its affiliates, and only in accordance with the terms and
conditions stipulated. Copyright infringement is a violation of federal law subject to criminal and civil penalties. You
have no right to copy, modify, transfer, sublicense, publicly display, create derivative works of, distribute these
materials, or otherwise make these materials available, in whole or in part, to any third party.
Patents
The subject matter described herein may contain one or more inventions claimed in patents or patents pending owned by
Silicon Image, Inc. or its affiliates.
Trademark Acknowledgment
Silicon Image®, the Silicon Image logo, SteelVine®, Simplay®, Simplay HD®, the Simplay HD logo, Satalink®,
InstaPort®, the InstaPort Logo, and TMDS® are trademarks or registered trademarks of Silicon Image, Inc. in the United
States or other countries. HDMI® and the HDMI logo with High-Definition Multimedia Interface are trademarks or
registered trademarks of, and are used under license from, HDMI Licensing, LLC. in the United States or other
countries. MHL® and the MHL Logo are trademarks or registered trademarks of, and are used under license from, MHL,
LLC. in the United States or other countries. All other trademarks and registered trademarks are the property of their
respective owners in the United States or other countries. The absence of a trademark symbol does not constitute a
waiver of Silicon Image’s trademark or other intellectual property rights with regard to a product name, logo or slogan.
Export Controlled Document
This document contains information subject to the Export Administration Regulations (EAR) and has a classification of
EAR99 or is controlled for Anti-Terrorism (AT) purposes. Transfer of this information by any means to an EAR Country
Group E:1 or foreign national thereof (whether in the U.S. or abroad) may require an export license or other approval from
the U.S. Department of Commerce. For more information, contact the Silicon Image Director of Global Trade Compliance.
Further Information
To request other materials, documentation, and information, contact your local Silicon Image, Inc. sales office or visit
the Silicon Image, Inc. web site at www.siliconimage.com.
Revision History
Revision
0.80
Date
05/2012
Comment
Preliminary release.
©2012 Silicon Image, Inc. All rights reserved.
ii
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
Table of Contents
Getting Started .............................................................................................................................................................. 2
SiI-SK63101 SiI-SK63102 module pair description.................................................................................................... 3
WirelessHD module/Adapter Connection Diagram..................................................................................................... 4
SiI-SK63101 & SiI-SK63102 Specifications: ................................................................................................................. 5
Interference Statement ................................................................................................................................................... 6
USA-Federal Communications Commission (FCC).................................................................................................... 6
Note for system integrators .................................................................................................................................... 6
Label of the end product: ....................................................................................................................................... 6
Canada – Industry Canada (IC) .................................................................................................................................. 6
Note for System Integrators.................................................................................................................................... 7
Label of the end product: ....................................................................................................................................... 7
Europe - EU Declaration of Conformity and Restrictions............................................................................................ 7
CE RF Radiation Exposure Statement: ................................................................................................................... 8
Note for system integrators: ................................................................................................................................... 8
Marking/Labelling information ...................................................................................................................................... 9
Proposed Label and Location for SiI-SK63101 Receiver module ................................................................................ 9
Proposed Label and Location for Host Device installing SiI-SK63101 Receiver module ............................................. 9
Proposed Label and Location for SiI-SK63102 Transmitter module .......................................................................... 10
Proposed Label and Location for Host Device installing SiI-SK63102 Transmitter module ....................................... 10
References: ................................................................................................................................................................. 11
Standards Documents .............................................................................................................................................. 11
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
iii
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
List of Figures
Figure 1. SiI-SK63101 SiI-SK63102 module pair with supporting IO boards for testing ................................................. 3
Figure 2. SiI-SK63101 SiI-SK63102 module pair test setup ........................................................................................... 4
List of Tables
Table 1. Transmitter and Receiver specifications........................................................................................................... 5
Table 2. Referenced Documents................................................................................................................................... 11
iv
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
Getting Started
Follow the procedures described in this section to setup the SiI-SK63101 and SiI-63102 module pair:
1. Unpack the module pair.
2. Place the HDMI Video source and the HDMI video display in the same room at a reasonable distance apart (2 to
10m).
3. Connect the provided HDMI cable between the Tramsitter and the HDMI source output.
4. Connect the other provided HDMI cable between the Receiver and the HDMI display input.
5. Connect the AC/DC adapters to the Transmitter and Receiver.
6. You should see that the Status LED on the front of both the Transmitter and the Receiver are blinking.
7. Power up and configure the HDMI source and the HDMI Display such that they are sending and receiving video
respectively.
8. Ensure that the HDMI display is tuned to the the source input where the HDMI cable from the Receiver is plugged
in.
9. At this time the Display should render the video coming from the HDMI source and both Status LED on the
adapters should be ON.
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
SiI-SK63101 SiI-SK63102 module pair description.
Figure 2 shows the SiI-SK63101 and SiI-SK63102 modules along with the supporting IO board as part of the complete
evaluation kit:
Figure 1. SiI-SK63101 SiI-SK63102 module pair with supporting IO boards for testing
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
WirelessHD module/Adapter Connection Diagram.
Figure 2 shows the basic setup using a WirelessHD link.
Figure 2. SiI-SK63101 SiI-SK63102 module pair test setup
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
SiI-SK63101 & SiI-SK63102 Specifications:
Table 1. Transmitter and Receiver specifications
Parameter
Value
Notes
Dimensions (in mm)
X = 82, Y= 40, Z = 30
Each sides
Operating temperature:
0C - 40C
HDMI Receptacle
Type A
DC 3.3V Plug
2.5mm
Mechanical
Electrical
Power Input VIN
3.3V DC, 2A
Max input Voltage ripple
<10% of VIN peak to peak
Max power
2.5W (Max)
Connected Power
2.0W (Typical)
Sleep/Wake Power
100mW (Typical)
With 1080p60Hz Video @
10m
Radio Frequencies
HRP Channel Index Support
Channel 2, 3
Frequency range HRP
59.40 Ghz – 63.56 Ghz
HRP Bandwidth
1.76 Ghz per channel
LRP Channel Index Support
Channel 1, 2, 3, 4. 5 per HRP channel
LRP Bandwidth
92 MHz per channel
Receiver Sensitivity
-72 dBm (Typical)
Noise Figure
10 dB (Typical)
Line of Sight (LOS) Link Margin
6 dB at 10m 1080p/60Hz 4:4:4 with SPER <0.01
Compliance and Regulation
WirelessHD1.1
Compliant
HDMI 1.4a
Compliant
CEC
Compatible
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
Interference Statement
USA-Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
1.
2.
3.
4.
5.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This product does not contain any user serviceable components. Any unauthorized product changes or modifications
will invalidate warranty and all applicable regulatory certifications and approvals.
Caution: Exposure to Radio Frequency Radiation: The installer of this radio equipment must ensure that a minimum
distance of 20cm shall be maintained between the antenna and the users of the host that this module is integrated
into.
Caution: User is cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or
transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. If the module
is installed with other transmitting devices which can transmit simultaneously with this device and antenna-toantenna distance is less than 20cm, assessing RF exposure compliance with multiple transmitters within a host
device shall be performed based upon FCC requirements.
Note for system integrators
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance
requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained
between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC
radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or
modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
Label of the end product:
For SII-SK63101 module: The final end product must be labeled in a visible area with the following "Contains FCC ID:
UK2-SII-SK63101 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement
has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
For SII-SK63102 module: The final end product must be labeled in a visible area with the following "Contains FCC ID:
UK2-SII-SK63102 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement
has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Canada – Industry Canada (IC)
This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of this device.”
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage
et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement du dispositif.
The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications
were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent
radio interference to the licensed service, this device is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur
et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne
d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence.
Caution: Exposure to Radio Frequency Radiation.
The installer of this radio equipment must ensure that the minimum distance of 20cm between the antenna and the user
shall be maintained such that it does not emit RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada’s website www.hcsc.gc.ca/rpb.
Se pour conformer aux conditions d'exposition de RF toutes les antennes devraient être localisées à une distance
minimum de 20 cm du corps de toutes les personnes.
Note for System Integrators
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement
of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the
antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation
exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate this equipment.
Label of the end product:
For SII-SK63101 module: The final end product must be labeled in a visible area with the following "Contains IC:
6705A-SIISK63101 ".
For SII-SK63102 module: The final end product must be labeled in a visible area with the following "Contains IC:
6705A-SIISK63102 ".
Europe - EU Declaration of Conformity and Restrictions
This equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC.
This equipment is marked with the
symbol.
This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of following technical
specifications:
EN 301 567 v1.1.1: Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems;
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive.
EN 301 489-28 v1.1.1, EN 301 489-1 v 1.9.2: Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 28: Specific conditions for
wireless digital video links.
EN 60950-1: Safety of Information Technology Equipment.
EN 62311: 2008: Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0 Hz - 300 GHz)
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
Marking by the symbol
indicates that usage restrictions apply.
CE RF Radiation Exposure Statement:
Caution This equipment complies with European RF radiation exposure limits and is meant to be used as an Indoor
device. The installer of this radio equipment must ensure that the minimum distance of 20cm shall be maintained
between the antenna and the users of the host that this module is integrated into. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Following is a list of countries available for CE mark one-stop notification relating to this equipment:
Belgium, Bulgaria, Croatia, Cyprus, Germany, Hungary, Iceland, Macedonia, Montenegro, Norway, Romania, Slovakia,
Spain, Switzerland and United Kingdom.
This device is restricted for use in the following countries:
Denmark, Estonia, Finland, Latvia, Malta, Serbia and Slovenia.
Note for system integrators:
- The module is tested to comply with the requirement of the R&TTE Directive. System integrators are responsible for
compliance of the final device with the R&TTE Directive.
- Packaging: CE Marking must also be on the outer packaging of the product. The outer packaging must also provide an
indication as to where the device is intended to be used and/or conversely, where there may be restrictions for use.
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
Marking/Labelling information
Proposed Label and Location for SiI-SK63101 Receiver module
Label
Location
SILICON IMAGE
Model: SII-SK63101
FCC: UK2-SII-SK63101
IC: 6705A- SIISK63101
Front of Module
Proposed Label and Location for Host Device installing SiI-SK63101
Receiver module
This device contains
Model: SII-SK63101
FCC: UK2-SII-SK63101
IC: 6705A- SIISK63101
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
Proposed Label and Location for SiI-SK63102 Transmitter module
Label
Location
SILICON IMAGE
Model: SII-SK63102
FCC: UK2-SII-SK63102
IC: 6705A- SIISK63102
Front of Module
Proposed Label and Location for Host Device installing SiI-SK63102
Transmitter module
This device contains
Model: SII-SK63102
FCC: UK2-SII-SK63102
IC: 6705A- SIISK63102
10
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
References:
Standards Documents
Table 2 lists the abbreviations used in this document. Contact the responsible standards groups listed in Error!
Reference source not found. for more information on these specifications.
Table 2. Referenced Documents
Abbreviation
WiHD
HDMI
HCTS
HDCP
DVI
E-EDID
CEA-861-D
EDDC
Standards publication, organization, and date
WirelessHD Specification, Version 1.1, WirelessHD, LLC, May 2010
High Definition Multimedia Interface, Revision 1.4a, HDMI Consortium, March 2010
HDMI Compliance Test Specification, Revision 1.4a, HDMI Consortium, March 2010
High-bandwidth Digital Content Protection, Revision 1.4, Digital Content Protection, LLC; July 2009
Digital Visual Interface, Revision 1.0, Digital Display Working Group, April 1999
Enhanced Extended Display Identification Data Standard, Release A Revision 1, VESA; Feb. 2000
A DMONITOR Profile For Uncompressed High Speed Digital Interfaces, EIA/CEA, July 2006
Enhanced Display Data Channel Standard, Version 1, VESA, September 1999
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL
11
SiI-63101 and SiI63102
Quick Start Guide – OEM Installation
Silicon Image, Inc.
Disclaimers
These materials are provided on an “AS IS” basis. Silicon Image, Inc. and its affiliates disclaim all representations and
warranties (express, implied, statutory or otherwise), including but not limited to: (i) all implied warranties of
merchantability, fitness for a particular purpose, and/or non-infringement of third party rights; (ii) all warranties arising
out of course-of-dealing, usage, and/or trade; and (iii) all warranties that the information or results provided in, or that
may be obtained from use of, the materials are accurate, reliable, complete, up-to-date, or produce specific outcomes.
Silicon Image, Inc. and its affiliates assume no liability or responsibility for any errors or omissions in these materials,
makes no commitment or warranty to correct any such errors or omissions or update or keep current the information
contained in these materials, and expressly disclaims all direct, indirect, special, incidental, consequential, reliance and
punitive damages, including WITHOUT LIMITATION any loss of profits arising out of your access to, use or
interpretation of, or actions taken or not taken based on the content of these materials.
Silicon Image, Inc. and its affiliates reserve the right, without notice, to periodically modify the information in these
materials, and to add to, delete, and/or change any of this information.
Notwithstanding the foregoing, these materials shall not, in the absence of authorization under U.S. and local law and
regulations, as required, be used by or exported or re-exported to (i) any U.S. sanctioned or embargoed country, or to
nationals or residents of such countries; or (ii) any person, entity, organization or other party identified on the U.S.
Department of Commerce's Denied Persons or Entity List, the U.S. Department of Treasury's Specially Designated
Nationals or Blocked Persons List, or the Department of State's Debarred Parties List, as published and revised from
time to time; (iii) any party engaged in nuclear, chemical/biological weapons or missile proliferation activities; or (iv)
any party for use in the design, development, or production of rocket systems or unmanned air vehicles.
Products and Services
The products and services described in these materials, and any other information, services, designs, know-how and/or
products provided by Silicon Image, Inc. and/or its affiliates are provided on as “AS IS” basis, except to the extent that
Silicon Image, Inc. and/or its affiliates provides an applicable written limited warranty in its standard form license
agreements, standard Terms and Conditions of Sale and Service or its other applicable standard form agreements, in
which case such limited warranty shall apply and shall govern in lieu of all other warranties (express, statutory, or
implied). EXCEPT FOR SUCH LIMITED WARRANTY, SILICON IMAGE, INC. AND ITS AFFILIATES
DISCLAIM ALL REPRESENTATIONS AND WARRANTIES (EXPRESS, IMPLIED, STATUTORY OR
OTHERWISE), REGARDING THE INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS
PROVIDED BY SILICON IMAGE, INC. AND/OR ITS AFFILIATES, INCLUDING BUT NOT LIMITED TO, ALL
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND/OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. YOU ACKNOWLEDGE AND AGREE THAT SUCH
INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS HAVE NOT BEEN DESIGNED,
TESTED, OR MANUFACTURED FOR USE OR RESALE IN SYSTEMS WHERE THE FAILURE,
MALFUNCTION, OR ANY INACCURACY OF THESE ITEMS CARRIES A RISK OF DEATH OR SERIOUS
BODILY INJURY, INCLUDING, BUT NOT LIMITED TO, USE IN NUCLEAR FACILITIES, AIRCRAFT
NAVIGATION OR COMMUNICATION, EMERGENCY SYSTEMS, OR OTHER SYSTEMS WITH A SIMILAR
DEGREE OF POTENTIAL HAZARD. NO PERSON IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR
REPRESENTATION CONCERNING THE PERFORMANCE OF THE INFORMATION, PRODUCTS, KNOWHOW, DESIGNS OR SERVICES OTHER THAN AS PROVIDED IN THESE TERMS AND CONDITIONS.
1140 E. Arques Avenue
Sunnyvale, CA 94085
T 408.616.4000 F 408.830.9530
www.siliconimage.com
12
©2012 Silicon Image, Inc. All rights reserved.
CONFIDENTIAL

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 16
Page Layout                     : OneColumn
Page Mode                       : UseNone
Producer                        : doPDF Ver 7.2 Build 355 (Windows 7 Enterprise Edition (SP 1) - Version: 6.1.7601 (x64))
Create Date                     : 2012:05:20 10:29:25-08:00

EXIF Metadata provided by EXIF.tools