Launch Tech PADIV X-431 PAD IV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3236236
Application ID	IksneXRm2qCdlGvK/2tiTQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	346.84kB (4335540 bits)
Date Submitted	2016-12-21 00:00:00
Date Available	2017-02-04 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	福昕高级PDF编辑器打印机版本8.0.2.0718
Document Lastmod	2016-12-09 18:11:28
Document Title	User manual

X-431 PAD IV
ÓÉ Foxit PDF Editor ±à¼°æȨËùÓÐ (c) by Foxit Software Company, 2004
½öÓÃÓÚÆÀ¹À¡£
Quick Start Guide
HD IV Module
Knowledge of X-431 PAD IV
X-431 PAD IV is a new sophisticated Android-based diagnostic tool developed by LAUNCH. Utilizing higher hardware
configuration and user-friendly interface, it inherits LAUNCH’s advanced diagnosing technology by covering a wide range of
vehicles, featuring powerful functions, and providing precise test result.
In addition to traditional diagnosis, X-431 PAD IV also supports the quick vehicle VIN(Vehicle Identification Number) scanning
technology, remote diagnosis(making remote request established easier and getting repair job fixed faster), diagnostics forum(a
platform for technicians to share repair skills and technical exchange), repair data(abundant repair information for quick retrieval
and reference), one-click update and add-on modules, such as oscilloscope, ignition, sensor and battery test etc.
USB1 port
(For connecting it to VCI module to perform diagnosis)
Diagnostic socket
(For connecting the diagnostic cable.)
DC-IN power jack
(For connecting the power
adaptor or cigarette lighter/battery
clamps cable to obtain power.
For details on connection, please
refer to Section “Preparation &
Connection” in this Quick Start
Guide.)
Status of vehicle connection
(If the module is disconnected from
the vehicle’s DLC, it will display “
”.)
(To connect USB devices or add-on modules)
Status of Bluetooth communication
Headphone jack
Status of USB connection
(To connect the included power adaptor)
Power/Screen lock key
Reset hole
fil
The HD IV module works as a vehicle communication
interface device, which is designed to read the vehicle data
and then send it to X-431 PAD IV tablet via Bluetooth
communication and USB connection. The module comes
loaded with a 4" display screen, enabling you to easily identify
the working status of the module and X-431 PAD IV tablet.
Pr
Note: Remember to remove the diagnostic cable or adaptor cable from the
DLC if it keeps idle or unused.
Reserved
(spare)jack
USB2 port
DC-IN jack
LAUNCH
(Once the module is in USB mode,
it will display “
”.)
(When the module is connected
to the tablet via USB cable,
“
” appears.)
How to supply power to the VCI module?
1). Via power adaptor: Plug one end of the included power adaptor to
the DC-IN jack of the module, and the other end to the AC outlet.
2). Via cigarette lighter cable/battery clamps cable: Plug one end of
the cigarette lighter/battery clamps cable to the DC-IN jack of the
module, and the other end to the cigarette receptacle / vehicle's
battery.
(To reset the X-431 PAD IV)
Volume +/- keys
TF card slot
USB port
( To adjust the volume )
(To insert a TF card for memory extension.)
(For connecting it to the
tablet to perform diagnosis.)
Ethernet port
HDMI port
(To connect Ethernet cable for wired network)
(To connect an external projector or monitor with HDMI interface)
Front camera
Technical parameters:
–
Working voltage:9-36V
–
Working temp.:-10℃-55℃
–
Communication via:
1) Bluetooth or 2) USB cable
Accessory Checklist
Common accessories for each X-431 PAD IV are same, but for different destinations, the accessories of X-431 PAD IV may vary.
Please consult from the local agency or check the packing list supplied with X-431 PAD IV together.
X-431 PAD IV tablet
HD IV module
Diagnostic cable
Touch Screen
Microphone
(A tablet for showing test results.)
Power adaptor
(A device for accessing vehicle data.)
USB cable
(Optional)
Optional
Camera Flash
(To connect the VCI module to the vehicle’s
DLC.)
Power adaptor for VCI module
(Optional)
Rear camera
Optional
(To connect the HD IV module and
(To supply power to the X-431 PAD IV tablet.) X-431 PAD IV to perform vehicle diagnosis.)
Cigarette lighter&Battery clamps cable
Password envelope
(To supply power to the VCI module
through AC outlet.)
Diagnostic connector kit
(Optional)
Audio speaker
Adjustable kickstand
(Flip out it to any angle and
work comfortable at your desk,
or hang it on automotive parts)
(For connecting the diagnostic cable and
non-16pin vehicle DLC.)
(To supply power to the VCI module through
connection to cigarette lighter receptacle/
vehicle’s battery.)
(A piece of paper bearing S/N and Activation
Code, which is needed for your registration.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 2
Has XFA                         : No
Producer                        : 福昕高级PDF编辑器打印机版本8.0.2.0718
Author                          : 
Creator                         : 
Subject                         : 
Title                           : 
Modify Date                     : 2016:12:09 18:11:28+08:00

EXIF Metadata provided by EXIF.tools