Launch Tech PADIVHD Heavy duty/Medium duty/Light duty Vehicle Communication Interface User Manual

Launch Tech Co., Ltd. Heavy duty/Medium duty/Light duty Vehicle Communication Interface

User Manual

Knowledge of X-431 PAD IV X-431 PAD IV Quick Start GuideX-431 PAD IV is a new sophisticated Android-based diagnostic tool developed by LAUNCH. Utilizing higher hardware configuration and user-friendly interface, it inherits LAUNCH’s advanced diagnosing technology by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.In addition to traditional diagnosis, X-431 PAD IV also supports the quick vehicle VIN(Vehicle Identification Number) scanning technology, remote diagnosis(making remote request established easier and getting repair job fixed faster), diagnostics forum(a platform for technicians to share repair skills and technical exchange), repair data(abundant repair information for quick retrieval and reference), one-click update and add-on modules, such as oscilloscope, ignition, sensor and battery test etc. Power/Screen lock keyHeadphone jackTF card slot(To insert a TF card for memory extension.)HDMI port(To connect an external projector or monitor with HDMI interface)Ethernet port(To connect Ethernet cable for wired network)Volume +/- keys(To adjust the volume)Reserved jack   Reset hole(To reset the X-431 PAD IV)DC-IN jack(To connect the included power adaptor) USB2 port(To connect USB devices or add-on modules)USB1 port(For connecting it to VCI module to perform diagnosis)Front cameraTouch ScreenRear cameraAdjustable kickstandAudio speakerCamera FlashAccessory ChecklistX-431 PAD IV tablet                         HD IV module                         Diagnostic cablePower adaptor                            USB cable                                   Power adaptor for VCI module                                 Password envelope                                Diagnostic connector kit(A tablet for showing test results.) (A device for accessing vehicle data.) (To connect the VCI module to the vehicle’s DLC.)(To supply power to the X-431 PAD IV tablet.)(To connect the HD IV module and X-431 PAD IV to perform vehicle diagnosis.) (To supply power to the VCI module through AC outlet.)(For connecting the diagnostic cable and non-16pin vehicle DLC.)Common accessories for each X-431 PAD IV are same, but for different destinations, the accessories of X-431 PAD IV may vary. Please consult from the local agency or check the packing list supplied with X-431 PAD IV together.work comfortable at your desk, or hang it on automotive parts)(Flip out it to any angle andHD IV ModuleDC-IN power jackStatus of vehicle connectionStatus of Bluetooth communicationDiagnostic socket(For connecting the diagnostic cable.)Status of USB connectionUSB port(For connecting the poweradaptor or cigarette lighter/battery clamps cable to obtain power. For details on connection, please refer to Section “Preparation & Connection” in this Quick Start Guide.)(When the module is connected to the tablet via USB cable, “       ” appears.)(If the module is disconnected from the vehicle’s DLC, it will display “      ”.)(Once the module is in USB mode, it will display “      ”.)(For connecting it to the  tablet to perform diagnosis.)ProfileNote: Remember to remove the diagnostic cable or adaptor cable from the DLC if it keeps idle or unused.        The HD IV module works as a vehicle communication            interface device, which is designed to read the vehicle data         and then send it to X-431 PAD IV tablet via Bluetooth      communication and USB connection. The module comes    loaded with a 4" display screen, enabling you to easily identify the working status of the module and X-431 PAD IV tablet.Microphone(To supply power to the VCI module through connection to cigarette lighter receptacle/vehicle’s battery.)(A piece of paper bearing S/N and Activation Code, which is needed for your registration.)Cigarette lighter&Battery clamps cableLAUNCHTechnical parameters: Working voltage:9-36V Working temp.:-10℃-55℃ Communication via:   1) Bluetooth or 2) USB cableHow to supply power to the VCI module?1). Via power adaptor: Plug one end of the included power adaptor to the DC-IN jack of the module, and the other end to the AC outlet.2). Via cigarette lighter cable/battery clamps cable: Plug one end of the cigarette lighter/battery clamps cable to the DC-IN jack of the module, and the other end to the cigarette receptacle / vehicle's battery.Optional ½öÓÃÓÚÆÀ¹À¡£°æȨËùÓÐ (c) by Foxit Software Company, 2004ÓÉ Foxit PDF Editor ±à¼-Optional½öÓÃÓÚÆÀ¹À¡£°æȨËùÓÐ (c) by Foxit Software Company, 2004ÓÉ Foxit PDF Editor ±à¼-(spare)Optional½öÓÃÓÚÆÀ¹À¡£°æȨËùÓÐ (c) by Foxit Software Company, 2004ÓÉ Foxit PDF Editor ±à¼-(spare)½öÓÃÓÚÆÀ¹À¡£°æȨËùÓÐ (c) by Foxit Software Company, 2004ÓÉ Foxit PDF Editor ±à¼-(Optional) (Optional)(Optional)
 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.   This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.   However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Navigation menu