Launch Tech X431HDM Automotive Diagnostic Adaptor Box User Manual X 431 HD Module

Download:
Mirror Download [FCC.gov]
Document ID	2435665
Application ID	IDlqan2G4RtsSio9OXkF9A==
Document Description	User Manual pt 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.08kB (463444 bits)
Date Submitted	2014-11-04 00:00:00
Date Available	2014-11-04 00:00:00
Creation Date	2014-09-05 14:18:45
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2014-09-05 14:19:49
Document Title	X-431 HD Module
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	luowenming

X-431 HD Module
User’s Manual
(V1.00.000)
Disclaimer
While using this product, please pay more attention to the following:
Follow instructions to connect the X-431 HD module to your vehicle before using.
While you are driving a car, do not attempt to operate this product, so as to avoid distraction and traffic
hazard. The company assumes no responsibilities for any traffic accident or economic loss resulting from
operating it while driving.
This product collects and sends data via Bluetooth communication. Avoid using this product near a place
with strong electromagnetic interference to ensure a normal transmission.
Any problem related to this product should be solved by our professional technical personnel. The company
has the obligation to make some repair or replacements to this product according to the actual conditions.
This user manual is subject to change without prior notice due to continuous innovation.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference. (2) This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
X-431 Heavy-duty module is specifically designed to diagnose diesel and gas-fueled heavy-duty vehicle
models of 12V & 24V voltage.
1 Knowledge of X-431 HD Module
1.1 Features
1. Applicable to diesel vehicle of 12V & 24V voltage; no need for battery conversion when testing 24V trucks;
2. Supports a wide range of vehicle models covering Asian, American and European etc;
3. Powerful testing function enables you to diagnose all electronic control system;
4. International design to adapt to all diagnostic sockets.
1.2 Ports and Indicators of X-431 HD Module
Fig. 1-1 Ports and indicators of X-431 HD module
No.
Name
Notes
Indicators (from left to
right)
Power indicator
It lights up when X-431 HD module is
powered up.
Diagnostic tool
It lights up when X-431 HD module is
communicating with the diagnostic tool.
communication
indicator
Vehicle
communication
It lights up when X-431 HD module is
communicating with vehicle’s DLC.
indicator
Serial port
communication
It illuminates when X-431 HD module is
connected to PC via serial port cable.
indicator
USB status
indicator
Wi-Fi indicator
It lights up when Wi-Fi / Bluetooth toggle
switch is in Wi-Fi mode.
Bluetooth indicator
It lights up when Wi-Fi / Bluetooth toggle
switch is in Bluetooth mode.
Battery working
Press the power switch, it will light up;
To put it out, press it again.
indicator
Charging indicator
It illuminates blue after USB cable is
properly connected to X-431 HD
module.
(Currently
disabled,
for
subsequent function extension.)
Wi-Fi / Bluetooth toggle
It illuminates green while being charged;
once fully charged, it goes out. (Note: In
general, the charging time is about 1-2
hours.)
To toggle between Wi-Fi and Bluetooth.
switch
PC communication port
To connect to the serial port of PC.
(Currently disabled, for subsequent
function extension.)
USB port
To connect the B-shaped terminal of
USB cable.
Diagnostic socket
To connect the main cable.
Power switch of Wi-Fi
To turn on/off the power supply of Wi-Fi
& Bluetooth module. (Note: This switch
is not intended to manage the power
supply of X-431 HD module.)
and Bluetooth module
Power interface
To connect the power adaptor of
X-431HD module.
1.3 Technical Parameters
Œ
Working voltage: 8~24V
Œ
Working temperature: -15℃ ~ 60℃
Œ
Storage temperature: -20℃ ~ 70℃
Œ
Œ
Relative humidity: 10% ~ 80%
Dimension: 110 mm * 178 mm * 50 mm
2 Connections
2.1 How to connect OBD II vehicle
Follow the steps described below to proceed:
1.
Locate vehicle’s DLC socket. The DLC is usually located 12 inches from the center of the instrument panel
(dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located under
dashboard, a label should be there telling location. If the DLC cannot be found, refer to the vehicle’s
service manual for the location.
Fig. 2-1
2.
Connect one end of the main cable to the diagnostic socket, and then connect other end to the vehicle’s
DLC (For non-16 pin DLC, you need to choose the corresponding diagnostic connector). See Fig. 5-3.
Fig. 2-2
2.2 How to connect non-OBD II vehicle
Choose one of the following to connect non-OBD II vehicle:
1. Via Cigarette Lighter
2. Via Battery Clamps Cable
2.3 Download and Install X-431 HD Module App
1.
Visit the LAUNCH website and download the application corresponding to X-431 HD module;
Note: If downloading using the diagnostic tool please make sure Wi-Fi has good or strong signals.
2.
Follow the on-screen instructions to install it. Once installation is complete, an application icon will appear
on the HOME screen.
2.4 Activate X-431 HD Module
After purchasing X-431 HD module, you have to activate it before use.
Follow the steps below to proceed:
1、 Launch the application, and tap
to enter;
2、 Tap “Profile” from the pull-down menu, and then tap “Connector Activation”;
3、 Input the Serial Number and Verification Code, which can be found in the included password envelope. Tap
“Activate”.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Company                         : MC SYSTEM
Source Modified                 : D:20140905061834
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2014:09:05 14:19:49+08:00
Create Date                     : 2014:09:05 14:18:45+08:00
Metadata Date                   : 2014:09:05 14:19:49+08:00
Document ID                     : uuid:81baa875-b881-4f63-9e6e-e02fb24d4836
Instance ID                     : uuid:eb0a770f-85ea-4fc7-9e57-ddf2f1c18fdc
Version ID                      : 2
Format                          : application/pdf
Title                           : X-431 HD Module
Creator                         : luowenming
Subject                         : 
Headline                        : 
Page Count                      : 7
Page Layout                     : OneColumn
Author                          : luowenming

EXIF Metadata provided by EXIF.tools