Leadtek Research 8A10-1 H.264 Portable Videophone User Manual 8A10 W05G0388 C E

Leadtek Research Inc H.264 Portable Videophone 8A10 W05G0388 C E

UserManual.wiki >

Leadtek Research >

8A10 1 User Manual

Users Manual

AMOR 8A10

Important NotesImportant product safety informationand 1. Although has undergone several safety tests and conforms to a number of national security standards, using the device could become risky in certain abnormal climatic or seismic conditions without correct operation. Please read the manual carefully before operating the device.2. For your safety, please keep power off when aboard an aircraft.3. In restricted areas such as gas stations or in the vicinity of explosives, please shut down the . Under no conditions should you use the near fuel or flammable materials. (and its internal battery) has not been certified as an intrinsic safe device.4. Only Leadtek authorized service providers have the authority to repair the .5. As the is not water-proof, make sure to take appropriate precautions in humid or rainy weather and keep it dry at all times.6. Before connecting any other device to the product, please read detailed instructions in the user manual. To avoid any possible damage do not connect the to any incompatible product.7. It is normal for the to become slightly warm during operation.8. Specification and functions vary in different areas.AMOR 8A10AMOR 8A10AMOR 8A10AMOR 8A10AMOR 8A10AMOR 8A10AMOR 8A10AMOR 8A10AMOR 8A10

Battery safety noticesFailing to use the battery correctly could be hazardous. Please pay attention to the following.1. Your is powered by a rechargeable battery that can be frequently charged and discharged. All batteries have a limited usage lifetime. When the device’s uptime and standby time becomes significantly shorter than normal, it is time to replace the battery.2. Use only batteries approved and authorized by Leadtek. If other makes are used, damage to the product may result and voids the warranty. Do not service the battery yourself. You should contact Leadtek or its authorized service providers.3. When removing the battery from the , make sure is powered off first.4. Please do not disassemble, alter, or solder the battery. This could damage insulation, cause gas leakage, and damage to the battery protection circuit and internal cells.5. When the battery is not installed, place it in a water-proof and insulated container. Under no circumstance should you use any metal to connect the positive and negative terminals or place the battery in a metal container. Do not place the battery in a microwave or in a high-pressure container. This could cause a short circuiting and fire.6. Do not heat the battery or place it close to the source of fire, a stove, or any heated environment over 45°C; short circuiting could result in smoke emission or a fire.7. Do not place the battery in a damp or humid place. This could also cause short circuiting, smoke and eventually fire.8. Charge the battery in normal temperature conditions. Avoid direct exposure to the sun, stove, or any other environment where the temperature exceeds 45°C. Follow the manual for proper battery charging procedure and pay close attention while this takes place.AMOR 8A10AMOR 8A10AMOR 8A10

9. Do not connect the battery to a vehicle cigarette lighter or any electrical plug.10. If the battery is charged in an abnormal environment the battery protection device will fail. An adverse chemical reaction will result as well as a potentially hazardous surge in electrical current.11. If the battery is not fully charged within the specified duration, stop charging immediately to avoid fire or damage to the battery.12. Do not use the battery for any other purpose - it could shorten battery life. Any surge of electrical current could result in fire.13. Avoid direct physical contact with any battery leakage. If there is any contact with battery leakage, make sure there is no contact between hands and eyes. Wash eyes with running water and consult with a doctor immediately if any contact accidentally occurs.14. If the battery gives off a strange smell, changes color or shows evidence of an abnormal condition, remove it from the housing and discard it properly. Consult your local agency or check your local regulations on how to properly dispose a Lithium-Ion battery.15. Leadtek and its supplier are not responsible for any damage or casualty as a result of mis-using the battery or not following the conditions described in this Battery Safety Notice.AMOR 8A10

Table of Contents1 Quick Start11 Introduction12 What’s in the Package13 Getting to Know Your AMOR 8A1013 Front View1517 Using the Cradle20 Using the Remote Control22 How to Make and Receive a Video Call22 Dialing Out23 Direct Dialing26 Speed Dialing28 Dialing from the Call Log29 Dialing from the Contact30 Operations During a Call42 How to Make 3-way Conference Call44 How to Use the Call LogRear View16 Side View

Table of Contents47 How to Use the Contact47 Creating a Contact51 Editing a Contact52 Deleting a Contact53 Settings Menu54 General Settings60 Network Settings66 Call Settings68 Photo Settings70 Product Information71 Photo Displaying7277 Weather79 News81 Service82 FCC StatementBrowsing Photos76 Capturing Photos

This chapter will help you to quickly start using the AMOR 8A10 to make a video call.1. Quick StartBefore you beginUsing the 8A10 requires a (e.g., a Cable modem or ADSL modem with a router). If you are sharing your Internet connection with another device (such as a PC), you will also need a broadband router or residential gateway.The AMOR 8A10 also supports wireless connection. You can connect the AMOR 8A10 to the Internet through a wireless AP / router.AMOR Broadband Internet connection Setting upConnect one end of the Ethernet cable (RJ-45), supplied with your AMOR 8A10, to the AMOR Connect the other end to an open Ethernet port on your router.port marked “WAN” on the back of the 8A10.Step 1. Connect the Ethernet cableAMOR 8A10 Your RouterEthernet Cable1

Step 3. Extending the standGently pull out the stand on the back of the AMOR 8A10 and extend it to a 45-degree angle so that the AMOR 8A10 can stand on its own.Connect the Power Adapter to the Power jack (AMOR and then plug the Power Adapter into an electrical outlet.DC IN) on the back of the 8A10 Step 2. Connecting the power adapterPower AdapterAMOR 8A102

Turning on the AMOR 8A10The Power button is located at the upper right hand corner of the unit. Press and hold the power button for three seconds, and the AMOR 8A10 will be turned on.After 1 or 2 minutes, the 8A10 boots up, and you will see a screen like the picture shown below. This means that you have to calibrate the input. Please see page 59 for the detailed instructions on how to proceed.AMOR 3

Using the wizardBefore making your first video call, you first have to choose and set up your network settings correctly. When you use 8A10 for the first time, a built-in wizard will automatically start to help you quickly set up your network connection and other settings, as the picture shown below. Please follow the step-by-step instructions.AMOR Step 1: Tap on the “Start” button.Step 2: Tap on the language to select it.4Step 3: Tap on the bar to make time zone selection.

Step 4: Tap on the left and right directional buttons to select the time zone, and then tap on the city in the list to represent your residence. Tap on the “Done” button when done.Step 5: Tap on the “OK” button.5Step 6: Choose whether you are using a wired or a wireless network connection by tapping on the corresponding button.

Step 7: The wizard is trying to connect to the Internet.6Step 8: After a few seconds, a message tells you that the connection is successful.Step 9: 8A10 is ready for use. Tap on the “GO” button.AMOR

Current date and timeIconsThere are several icons at the top of the screen. Their meanings are described below.Note: The TV Out icon at the lower left corner only appears when AMOR 8A10 is inserted into the cradle (see page 17). After successfully setting up your 8A10, you will see the home screen like this:AMOR 7Battery statusBattery is fullBattery is being rechargedBattery has 75% remaining powerLow battery warningBattery has 50% remaining powerBattery has 25% remaining power

8Internet connection statusAMOR 8A10 is not connected to the InternetAMOR 8A10 is using a wired Internet connectionAMOR 8A10 is using a wireless Internet connectionSIP service statusAMOR 8A10 is not connected to the SIP serviceAMOR 8A10 is connected to the SIP serviceCall settingsDo Not Disturb is ONAuto Answer is ONCall Forward is ONMuteRing offMissed callDisplays the number of missed callsMessageGet message

Making a video callThe easiest way to make a video call is with Direct Dial. Simply tap on the Dial icon on the home screen.You will see the following screen:Tap on the virtual keyboard on the screen to input the desired phone number or IP address, and then tap on or to dial out. When the other party answers the call, the connection is established, and you can start the conversation.If you choose , the recipient and you can see each other on the screen. If you choose , the video function is disabled.10

The 8A10 is a portable touch-screen videophone supporting Video and Voice applications. It is an intuitive, easy-to-use and easy-to-configure IP video communication solution. Its major functions include IP Telephony, IP Camera Viewer (SIP based) and Digital Photo Frame.The 8A10 is a next generation IP videophone based on the SIP protocol and the H.264 video codec. Using advanced video compression technology, the 8A10 maximizes the image and audio quality within the available bandwidth.AMOR AMOR AMOR 2. Introduction11Built-in high quality CMOS cameraBuilt-in 7” TFT LCD (800 x 480) with touch screenBuilt-in Wi-FiBuilt-in Lithium Ion polymer rechargeable batteryStrobe light call indicatorSIP-based VoIP and video IP telephonyPhoto-enabled Caller ID display, Call logs, Contact and Speed DialPhoto sharing during video call3-way conference for IP callDigital photo frame functionWeatherRSS NewsSecure Digital (SD) flash memory slotUSB 2.0 host portPop-out tilt-standDock to an optional cradle for additional featuresFirmware upgradableFeatures

Remote Control3. What’s in the PackagePlease make sure all of these items are included in your 8A10 package. If any item is missing, please contact your local dealer.AMOR AMOR 8A10BatteriesAV Cable12Ethernet CablePower AdapterCradle

4. Getting to Know Your AMOR 8A10Front ViewRotatable cameraLight flasherSpeakerSpeakerPower buttonMicrophoneTouch screen13Incoming calls cause the top of the to flash. The flash patterns may be selected through the settings menu, enabling you to customize what flash pattern displays when you receive a call. Flashing continues for 60 seconds for incoming calls.AMOR 8A10Light flasherThe camera may be rotated up to 135 degrees by swiveling it up or down. You can adjust the camera position depending on how you use the .AMOR 8A10Rotatable cameraEvent indicatorPower indicator

14There is a built-in microphone next to the camera. All audio input is received by the built-in microphone. The volume of the microphone can be adjusted in the settings menu.MicrophoneThe power indicator is located to the right of the event indicator. It indicates the power status as per the following:!Green: Power is on!Flashing Green: Battery is being recharged!Red: Battery is low and requires rechargingPower indicatorThis button turns the unit on and off when held down for 3 seconds.Power buttonThe audio output is transmitted through the built-in speakers on each side of the screen. The volume of the speaker can be adjusted in the settings menu.SpeakersYour has a seven-inch touch screen display panel, providing you with the ability to control your without a remote control, mouse, or keyboard. The touch screen allows you to make or receive a call with the fewest steps possible.AMOR 8A10AMOR 8A10Touch screenEvent indicatorEvent Flashing FrequencyNew MessageMissed callUnread / unheard messageSleep mode0.7 second on / 0.7 second off0.1 second on / 1 second offWhen some events occur, this indicator will light in the following pattern:!Flashing Blue: See the table below.!Flashing Blue twice: When the power button is pressed for 2 seconds to turn on / off AMOR 8A10.!Amber: Network or SIP is disconnected.!Flash blue and amber alternately: Firmware is being updated.

Rear ViewInternalbatteryStandPower jack Ethernet port15The has a built-in rechargeable battery, supporting up to two hours of video conversation, and up to 3.5 hours of power in the standby mode (see note). When the battery power gets low, the power indicator on the front panel will flash red, reminding you to connect the power adapter to recharge the battery. The battery indicator in the status bar will also indicate the amount of battery power left.AMOR 8A10Internal batteryInsert the power cord into this jack to recharge the .AMOR 8A10Power jackInsert the Ethernet cable into this port to connect the to the Internet.AMOR 8A10Ethernet portGently pull out the stand on the back of the AMOR 8A10 and extend it to a 45-degree angle so that the AMOR 8A10 can stand on its own.StandNote: The battery life is based on Ethernet connection.

Side ViewUSB 2.0connectorExternal headphone/speaker jackExternal microphonejackSD memory card slot16You can plug a USB flash drive or other supported devices into this connector.USB 2.0 connectorYou can connect external speakers or headphones for audio output.External headphone / speaker jackThe AMOR 8A10 can be used as a digital photo frame to display the pictures on an SD memory card when it is inserted into this slot.SD memory card slotYou can connect an external microphone to input audio.External microphone jack

5. Using the CradleThe cradle can be used for many purposes:!To connect your AMOR 8A10 to your TV and use it like a classic videophone on your big screen.!As a docking station on your desk or counter and to easily connect your AMOR 8A10 to a power and Internet source and to other devices quickly and conveniently.!Mounted on the wall in a kitchen or another room where you may want to make calls, in the same way that hearing people have a phone on the kitchen wall.!To connect, via AV cables (yellow, white, and red), to an external monitor such as a television.!To connect to Internet through the Ethernet port. The AMOR 8A10 unit can also be connected directly to the Ethernet cord.!To remove the AMOR 8A10 from the cradle, gently pull on the unit and separate it from the cradle.!To insert the AMOR 8A10 into the cradle, make sure that the AMOR 8A10 is face-up and that the cradle’s port is fully inserted into the AMOR 8A10. If it is not fully inserted, the battery will not charge.AMOR 8A10 inserted into the cradle17

Ethernet portTelephone jack Power cord jackRecessed mounting holes A/V portsRCA / A/V portsAudio/Video Output Jacks on the back of the cradle which are used to connect to a television or other external monitor.Ethernet portInsert an RJ-45 Ethernet cord into the jack to connect the unit directly to the Internet.Telephone jackYou can connect the telephone cord from your telephone set to the Telephone jack on the back of the cradle. Then you will be able to dial phone numbers with the telephone set.18

AC power cord jackInsert the power cord into the power port on the back of the cradle to recharge the AMOR 8A10. The power cord can also be connected directly to the AMOR 8A10.Recessed mounting holesThese holes may be used to mount the cradle on a wall in a location in your home or office where you frequently make or receive calls. Make sure the cradle is properly secured, when you place in above a flat screen television.19

You may control AMOR 8A10 with the remote control from a distance just like you do when you use the touch screen. You can highlight any icon or button on the AMOR 8A10 screen by navigating with the directional buttons (up, down, left, and right) on the remote. Press the “OK” button to select it.Selecting a text field will make the on-screen keyboard appear. You can select letters from the keys by navigating the pointer among the letters with the remote and pressing “OK” to select a single letter. You may activate the AMOR 8A10 from the standby mode at any time by pressing any button on the remote.6. Using the Remote Control20Numeric buttons on the remote controlUse the numeric buttons to input numbers.You can also move the pointer with the directional buttons to a number key of the on-screen keyboard and press the “OK” button to input a number.Directional buttons on the remote controlUse the directional buttons to navigate between icons and buttons on the AMOR 8A10 screen. Move the cursor with the directional buttons on the remote, and press the “OK” button to select the icon or item of choice.

The definition of buttons on the remote control21

7. How to Make and Receive a Video CallDialing OutThere are four methods to dial a number: Direct Dial, Speed Dial, Dial from Call Log, and Dial from Contact. The only difference among the four methods is how the phone number is obtained.Dialing Method How the Phone Number is ObtainedDirect Dial Enter directly using the touch screen.Speed Dial Phone numbers are stored in the Speed Dial menu.Dial from Call LogDial from ContactRetrieve phone number from the Call Log.Retrieve phone number from the Contact.22

A virtual number pad will appear. Enter the desired phone number or IP address, and tap on or to make a call.Direct DialingTo Direct Dial, tap on the Dial icon on the home screen.If you want to enter a URL, tap on the “Keyboard” icon at the bottom of the screen. A virtual keyboard will appear. Type the URL address and tap on the “Done” button.23

You can choose either Video call or Audio call by tapping on the respective button.Option FunctionInitiate the call with both video and voice. However, you may not see video images of the recipient if the recipient answers the call with voice only.Initiate the call with voice only. Recipient will not be able to see you.Create a new contact with the phone number1. Tap on the “Add New” icon.2. A sub-menu will appear. Tap on the “Create New Contact” button.3. Please see page 47 for the detailed instructions on how to create a new contact.24

Add the phone number to a contact1. Tap on the “Add New” icon.2. A sub-menu will appear. Tap on the “Add to Contact List” button.3. The contacts are listed. Tap on a contact for the phone number.4. Choose a type of phone number and tap on the “Done” button.5. The phone number is added to the contact. Tap on the “Save” button to save the contact.25

Speed DialingTo use Speed Dial, the contact must be in the Contact list and saved into a slot first. Up to nine contacts in the Contact list can be saved in the Speed Dial slots. Please follow the steps below. 1. Tap on the Speed Dial icon on the home screen.2. You will see the speed dial slot list. Please tap on an empty slot to assign a contact.3. The contacts will be listed. Tap on the contact you would like to add to Speed Dial.4. The contact is added to the slot. Tap on the “Done” button.26

5.Speed Dial numbers to make a call.Now you can tap on one of the 6. AMOR 8A10 is calling out.27

Dialing from the Call Log1. Tap on the Call Log icon on the home screen.2. The contents of the Call Log are displayed. Tap on the “Call” icon next to the desired record to make the call.You can tap on the up or down directional buttons on the right of the screen to find a specific record.3. 8A10 is calling out.AMOR 28

Dialing from the Contact1. Tap on the Contact icon on the home screen.2. The Contacts are displayed. Tap on the icon next to the desired contact to make an audio call, or tap on the icon to make a video call.3. 8A10 is calling out.AMOR 29

30Operations During a CallDuring a call, there are several icons at the bottom. Their functions will be explained below.0286532618Options – Call on HoldTap on the “Options” icon, and a sub-menu will appear.If you would like to hold the call, tap on the “Hold” button. The one you talked to will be held for waitingTo resume the conversation, tap on the “Retrieve” icon.80286532618

31Options – Call Transfer02237064958If you need to transfer the call to a new recipient, tap on the “Transfer” button.If the contact has more than one phone numbers, you have to choose one of them.The call is being transferred.If you choose to transfer to a phone number, enter the phone number and tap on the “Done” button.You can choose to transfer to a contact or a phone number.

3280223706495If you need to enter a URL, you can tap on the “Keyboard” icon.A virtual keyboard will appear. Enter the information and tap on the “Done” button.Options – Make a new callDuring a call, if you wish to make another call, you can tap on the “Make a new call” button.You have to choose a contact or enter the phone number of the new call.

Tap on the icon to make an audio call, or tap on the icon to make a video call.When the second call is in progress, the first call will be held for waiting.02865326188Options – Switch as voice callIf you want to talk with only voice, you can tap on the “Switch as voice call” button.0286532618The video is disabled. You will not be able to see each other.33

86532618To resume the video, tap on the “Switch as video call” button in the “Options” menu.8Options – BuzzIf you want to catch the attention of the other party, you can tap on the “Buzz” button.A light bulb symbol will show up at the upper left corner, and the top of the video phone of the other party will flash.0286532618340286532618The other party will be able to see you, while you won’t see him or her until the other party selects the same “Switch as video call” option in the “Options” menu.

02865326180286532618Volume ControlNumeric KeypadYou can tap on the “Keyboard” icon to invoke a virtual numeric keypad if you need to input numbers during the call such like extension numbers or password.Tap on the number buttons when necessary.When you don’t need the keypad, tap on the “Close” button to hide it.During a call, you can tap on the “Volume” icon to adjust the volume.Tap on the “+” button to increase the volume, and the “-” button to decrease the volume.Tap on the “Volume” icon again to finish the setting.0286532618028653261835

0286532618Share a PhotoDuring a call, you can share a photo with the other party.To use this function, tap on the “Photo Share” icon.You have to choose the photo source. The photo can be stored in the internal memory, the SD card, or the external USB device.Tap on the photo you would to share.You can tap on the up and down directional buttons to browse the photos in the device.Tap on the “Yes” button to confirm the selection.The photo will be shown to the other party shortly.028653261836

02865326180286532618The photo is waiting to be received by the other party.To stop sharing the photo, tap on the “Close” button.Capture a PhotoDuring a call, you can tap on the “Capture” icon to take a snapshot of the image of the other party and save it to the internal memory.You can see page 76 for related information.Screen Adjustment During a call, you can adjust the sizes of the images of both parties, and how they are displayed on the screen.To use this function, tap on the “Screen” icon and a sub-menu will appear with four options. Tap on the respective button to switch to the display mode of your choice.Standard:This is the default display mode. The image of the other party occupies the majority of the screen, and your image is at the lower-right corner.0286532618028653261837

Full Screen:PIP Display:Equal Display:The image of the other party is enlarged to full screen, and your image is hidden.The image of the other party occupies the full screen, and your image appears as a sub-picture at the lower-right corner.The image of the other party is on the left half of the screen, while your image is on the right half. Both images are equal in size.38

0286532618Video PrivacyWhen you tap on the “Privacy” icon, the video privacy is turned on and 8A10 stops sending your video to the other party during the video call, and you will not be seen by the one you talk to.AMOR An icon on the left will show up indicating Video Privacy mode.To turn off video privacy, tap on the “Restore” icon. Video transmission will resume immediately. You can think of video privacy as a video mute.The other party will see a picture which replaces your video.Video Privacy on(The screen of the other party)0227603518028653261839

02865326180286532618Hang UpTo end the call, tap on the “Hang up” icon.Audio MuteWhen you tap on the “Mute” icon, the audio mute is turned on and 8A10 stops sending your audio to the other party during the call. You will not be heard by the one you talk to.AMOR An icon on the left will show up indicating Audio Mute mode.To turn off audio mute, tap on the “Sound” icon. Audio transmission will resume immediately.028653261840

0286532618PTZ functionDuring a video call, you can tap on your local image to enable the PTZ function.0286532618The positions of the images of both parties will be exchanged. Tap on the button to start adjusting your local image with the PTZ function.0286532618: Zoom in your image: Zoom out your image: Adjust the area of your image that you want to be seen by the other party: Reset your image to the original size41

8. How to Make 3-way Conference CallYou can make a 3-way conference call with 8A10. Please follow the steps below to start a conference.AMOR 1. Tap on the Conference icon on the home screen.3. Enter the phone number of the other party and tap on the icon for video call or for audio call.2. Select the members in the Contact list, or you can tap on the “Keypad” button to enter the phone number.4. When the other party answers the call, the video connection is established.If you wish to invite the third party to the conference, tap on the “Invite” icon.022391468042

7. When the third party answers the call, the second party will be held. Tap on the “Conference” icon at the lower left corner to resume the call, and a 3-way video conference is established. In a video conference, the host can see all three members on the screen, while the other two members can only see him/herself and the host.To end the conference, tap on the “Hang up” icon.8. You can choose to view the other two members only. Tap on the “Screen” icon and choose “Callers Only”.02239146800225157839022391402251578399. Only the images of the other two parties are displayed.0223914680 02251578396. Enter the phone number of the third party and tap on the icon for video call or for audio call.435. Select the members in the Contact list, or you can tap on the “Keypad” button to enter the phone number.

9. How to Use the Call LogTo enter Call Log, please tap on the Call Log icon on the Home Screen.The contents of the Call Log are displayed.You can tap on the icon next to a record to make the call.You can tap on the icon next to a record to delete it.44

The Call Log contains three types of information: Missed Calls, Received Calls, and Dialed Calls.!“Missed Calls”: stores information about incoming calls that have been missed (unanswered).!“Received Calls”: stores information about incoming answered calls.!“Dialed Calls”: stores information about dialed calls.The kind of information in all three logs is the same, and the three logs can be displayed together or separately. The default is to displayed all logs together. To view a specific type of call log, follow the steps below.1. Tap on the “Options” icon.2. A sub-menu will appear. Tap on the type of call log you would like to see.3. Tap on each call log and its contents are displayed.To return to the Call Log menu, tap on the “Back” icon.45

Deleting all call logs1. Tap on the “Options” icon.2. A sub-menu will appear. Tap on the “Delete All” button.3. You will be asked for confirmation. Tap on the “Yes” button.46

10. How to Use the ContactThe Contact menu is where you store your contact information. When you enter the Contact menu, you will see a contact list with names and their photos, or you can add new contacts if the phonebook is empty. Contacts can be created manually, or extracted from the Call List. Each contact can store 100 sets of numbers, and you can define the phone number type to be the default.To navigate and make selections in the Contact menu and its sub-menus, simply tap on the corresponding area on the screen.1. To enter the Contact menu, please tap on the “Contact” icon on the Home screen. 2. Tap on the “Add New” icon.3. Tap on the “Contact Name” tab to enter the name for the contact.Creating a Contact47

4. Type the name of the contact and tap on the “Done” button. 5. Tap on the “Add New Number” tab to input the phone number for the contact.6. Enter the phone number and tap on the “Done” button.You can assign the phone number type to be Home, Mobile, Office, or VOIP.7. You may choose a specific ring tone for the contact. Tap on the “Ring Tones” tab.8. Choose the ring tone you prefer and tap on the “Done” button.48

Editing a Contact1. In the Contact menu, tap on the “Edit View” icon.2. Tap on the “Edit” button next to the contact you wish to edit.3. Tap on the fields and change the contents.When you finish all changes, tap on the “Save” button to update the contact.51

Deleting a Contact3. You will be asked for confirmation. Tap on the “Yes” button.1. In the Contact menu, tap on the “Edit View” icon.2. Tap on the “Delete” button next to the contact you wish to delete.52

The Settings menu is where you set up the 8A10 for your network and to work with your service provider. It is also where you configure it according to your preferences. There are five tabs corresponding to five sub-menus. To enter a sub-menu, tap on the respective tab.AMOR 11. Settings MenuTap on the Settings icon on the Home screen to enter the settings menu.53

General SettingsThe General Settings menu contains the general settings for the videophone, including Language, Date / Time, Sound, Display, and Security.LanguageYou can choose a language for the on-screen menu with this function. Tap on the Language tab, and the following screen will appear.Select a language you prefer and tap on the “Done” button.54

Date / TimeYou can set the date and time for 8A10 with this function. Tap on the Date / Time tab, and the following screen will appear.AMOR You can select the time zone in which you are using 8A10. Tap on the “Time Zone” tab and the following screen appears.AMOR Time Zone:Tap on the left and right directional buttons to select the time zone, and then tap on the city in the list to represent your residence. Tap on the “Back” icon when done.55

Date / Time:Use this function to set the date and time for 8A10. Tap on the “Setup” button, and the following screen will appear.AMOR Tap on the up and down directional buttons to enter the date and time. Tap on the “Done” button when done.Format:You can choose a time format by your preference with this function.Tap on the “Format” tab and the following screen will appear.Tap on the perferred time format and tap on the “Done” button.Daylight Savings:If the area you live is using Daylight saving time, you can configure 8A10 accordingly with this option.AMOR 56

SoundYou can adjust the volume and select the ring tone for 8A10 with this function. Tap on the Sound tab, and the following screen will appear.AMOR Volume:Tap on the “+” button to increase the volume, and tap on the “-” button to decrease the volume.Audio Call Ringtone / Video Call Ringtone:Tap on the “Audio Call Ringtone” or “Video Call Ringtone” tab, and the following screen will appear.Tap on the ring tone you like and tap on the “Done” button.57

Screen Flash:You can choose ON or OFF by tapping on the respective button.Light Flash:Incoming calls cause the top of the 8A10 to flash. You can tap on this tab to choose a flash pattern you prefer.AMOR DisplayYou can configure several display options for 8A10 with this function. Tap on the Display tab, and the following screen will appear.AMOR Brightness:Tap on the “+” button to increase the brightness of the LCD screen, and tap on the “-” button to decrease the brightness.Alternatively, you can drag the slider to adjust the brightness.Wallpaper:You can tap on this tab to choose one of the three built-in wallpapers, or use a custom wallpaper from a photo stored in the devices.Screen Saver:If this option is ON, you can choose what 8A10 will display after the specified idle time.AMOR Sleep Mode:If this option is ON, 8A10 will be automatically turned off after a specified period of time.AMOR Show Phone No:If this option is ON, the phone number of your 8A10 will be displayed on the screen of the other party when you make a call.AMOR 58

Touch Calibration:This function can be used to calibrate input via the touch screen.Tap on the “Start” button to start the calibration.The screen will turn blank, with a crosshair at the upper-left corner. Tap on the center of the crosshair.Four more crosshairs will appear in the following sequence: lower-left corner, lower-right corner, upper-right corner, and center. Tap on the center of each of the crosshairs.When you have tapped on the five crosshairs, you will be asked to tap on the five places again. Follow the instructions on the screen. Then tap on the “Done” button to finish the calibration.59

Tap on the “Connect Type” tab to choose the type of network connection.Choose the connect type and tap on the “Done” button.The details for each connect type are described below.AMOR 8A10Ethernet Device / Cable modemInternetDHCPThe 8A10 will acquire the IP address / Subnet Mask / Gateway / DNS address via the DHCP mechanism from an upstream device, such as a cable modem or a router.AMOR 62

Enter IP address / Subnet Mask / Gateway / DNS address manually.Ethernet DeviceStatic IPInternetAMOR 8A10Tap on the “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS”, and “Secondary DNS” tabs to input the respective information.Tap on the “Done” button when you finish the setting.Tap on the “Static IP” tab and tap on the “Done” button.63

PPPoE Username and Password are assigned by your ISP.Ethernet DevicePPPoEInternetAMOR 8A10Tap on the “PPPoE” tab and tap on the “Done” button.Tap on the “Username” and “Password” tabs to input the respective information.Tap on the “Done” button when you finish the setting.64

Call SettingsThe Call Setting menu contains the call-related settings for the 8A10. You can tap on the up and down directional buttons to view and access the options.AMOR Tap on the buttons to toggle "ON" or "OFF".Disturb is enabled. When it is on, Do Not Do Not DisturbTap on the buttons to toggle "ON" or "OFF". you will see a message on the screen when another call comes in during a call. You may answer the second call and then switch between these two calls. When it is on, Call WaitingAuto AnswerTap on the buttons to toggle "ON" or "OFF". When it is on, you have to input a password and specify a value in “Auto Answer Rings”.66

Tap on the buttons to toggle "ON" or "OFF".If the option is ON, you have to choose “Forwarding Method” and input the “Forward Number”.Forwarding Method:!Always: Forward call to the number you assign directly.!When Busy: Forward call to the number you assign when videophone is busy.!No Answer_5s ... 25s: Forward call to the number you assign if there is no answer after the specified time period. Call ForwardVideo BandwidthTap on this tab to gets better when given more bandwidth.choose a proper video bandwidth. The video quality 67

Photo SettingsThe Photo Setting menu contains the settings for displaying photos in the photo browser. The settings here are effective for all the photos from internal memory, SD memory card and USB device connected to 8A10.AMOR Image DisplayChoose a image display mode with function. The options are Smart and Stretch.Image InfoChoose whether to display the information of the photo at the lower right corner.68

Slide SequenceChoose the pattern to display the photos in the slideshow. The options are Sequential and Random.Slide IntervalChoose the interval of the slideshow. The options are 15 sec, 30 sec, 5 min, 15 min, and 60 min.Transition EffectChoose the transition effect between the photos in the slideshow. The options are No Effect, Sliding, and Dissolve.69

Product InformationThe Product Information menu contains information on Network, SIP, CODEC, Firmware, and Hardware. Tap on the “Product Information” tab, and the following screen will appear.You can tap on the tabs on the left of the screen to see the detailed information in each category.70

12. Photo DisplayingTap on the Photo icon on the Home screen to enter the Photo menu. This is where you browse and capture photos. The system memory can store up to 100 photos and the capacity of the external memory depends on the size of the SD memory card and the USB device.To browse photos, tap on the “Photo Albums” tab.Tap on the device you want to browse. The method for browsing the photos are essentially the same across the three devices.71

Photos in the device are listed as thumbnails. Tap on a thumbnail to view the photo full size.Browsing PhotosThe details of the photo are displayed at the lower right corner.You can tap on the left and right directional buttons to browse other photos.There are several icons at the bottom of the browser. Their functions are explained in the following pages.72

SlideShowTap on the “SlideShow” icon to start displaying all the photos in the current device as a slideshow. Tap anywhere on the screen to stop the slideshow.RotateWhen viewing a photo, you can tap on the “Rotate” icon and select “Rotate Right” (clockwise) or “Rotate Left” (counterclockwise).73

Capturing PhotosTo capture photos, tap on the “Camera” tab in the Photo menu to enter the snapshot window.Tap on the “Take Photo” icon to capture the video in the snapshot window and save the image as a photo.The snapshot is listed on the left. You can browse the captured photos in the “Photo Album” menu.76

13. WeatherWhen connected to the Internet, the 8A10 can provide you with the weather information of many cities in the world.AMOR To see the weather information, tap on the “Weather” icon on the Home screen.The weather of your city and 3 days forecast are displayed.To add new cities, tap on the “Options” icon.Tap on the “Add New” icon.77

Type the name of the country. When you type the initial letters, the matching names are listed. Tap on the country and tap on the “Done” button to choose it.Type the name of the city. Likewise, when you type the initial letters, the matching names are listed. Tap on the city and tap on the “Done” button to choose it.Tap on the “Done” button to confirm the city.The city is added to the weather list.You can tap on the up and down directional buttons to view the weather information of the cities in the list.78

14. NewsThe 8A10 can also bring you the latest news from all over the globe.AMOR To enter the News channel, tap on the “News” icon on the Home screen.News are classified in various categories. Tap the one you are interested in.The contents of the News are displayed.79

AMOR 8A10 can also function as an RSS reader, with which you can constantly receive updates from news sites or blogs without visiting their web pages. To subscribe to an RSS feed, tap on the “Options” icon.Tap on the “Add new” icon.Enter the RSS Feed URL and tap on the “Done” button.After a short while, tadded to the News list.he RSS feed is Tap on the new tab and you will be able to see the information from the RSS feed.RSS Reader80

15. ServicePlease consult your service provider for this function.81

16. FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:+This device may not cause harmful interference.+This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:+Reorient or relocate the receiving antenna.+Increase the separation between the equipment and receiver.+Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.+Consult the dealer or an experienced radio/TV technician for help.+Shielded interface cables must be used in order to comply with emission limits. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.82Federal Communication Commission (FCC) Radiation Exposure StatementThis EUT is compliance with SAR for general population/uncontrolled exposurelimits in ANSI/IEEE C95.1-1999 and had been tested in accordance with themeasurement methods and procedures specified in OET Bulletin 65 SupplementC.

Navigation menu