Lectrosonics HHE WIRELESS MICROPHONE TRANSMITTER User Manual USERS MANUAL

Lectrosonics Inc WIRELESS MICROPHONE TRANSMITTER USERS MANUAL

USERS MANUAL

HHHandheld TransmitterTECHNICAL DATARio Rancho, NM, USAwww.lectrosonics.com• DigitalHybridWireless®Technology• Standardthread-oncapsules• MembraneswitchandLCDinterface• AAbatterypower• SelectableRFpowerat50and100mW• TalkbackfeatureThe HH Digital Hybrid Wireless handheld transmitter represents an elegant solution for a variety of wireless microphone applications including live performance, broadcast, AV rental and houses of worship.  The HH incorporates many advanced features to provide high-quality speech and vocal reinforcement. Along with providing peerless audio quality with wide frequency response and dynamic range in native 400 Series mode, the technology used in the HH includes compatibility modes for Lectrosonics 200 Series, 100 Series and IFB receivers, and some systems from other top manufactur-ers. (Contact Lectrosonics for details.) Interchangeable CapsulesLectrosonics offers the HHC cardioid condenser capsule. Thread-on capsules from other manufacturers using a 1.25” opening and 28 thread pitch can also be used, including those from manufacturers such as EV, Shure®, Heil SoundTM, Telefunken® and others.*Digital Hybrid Wireless®Digital Hybrid Wireless® is a revolutionary design that combines digital audio with an analog FM radio link to provide both outstanding audio quality and exemplary, noise-free RF performance. Us-ing a patented algorithm to encode 24-bit digital audio information in the transmitter into an analog format, the encoded signal is then transmitted over an analog FM wireless link. At the receiver, the signal is then decoded to restore the original digital audio. This process eliminates compandor artifacts and produces an audio frequency response flat to 20 kHz.(US Patent 7,225,135)* Shure and Telefunken are registered trademarks of their respective companies and have no association with Lectrosonics. Heil Sound is a trademark of Heil Sound Ltd.Preliminary
17 August 2011581 Laser Road NE   •  Rio Rancho, NM  87124  USA  •  www.lectrosonics.com(505) 892-4501  •  (800) 821-1121  •  fax (505) 892-6243  •  sales@lectrosonics.comSpecificationsOperating frequencies: †Block 470  470.100 - 495.600 Block 19  486.400 - 511.900 Block 20  512.000 - 537.500 Block 21  537.600 - 563.100 Block 22  563.200 - 588.700 Block 23  588.800 - 614.300 Block 606  606.000 - 631.500 Block 24  614.400 - 639.900 Block 25  640.000 - 665.500 Selectable RF Transmission PowerThe HH transmitter allows the user to select from among two power settings† depending on the needs of the situation. The lower RF power setting uses slightly less current, thus battery life is enhanced. The higher power setting provides greater range and resistance to drop-outs. Selecting the RF power is accomplished using the control menu.Mute and Talkback FunctionsThe button on the back of transmitter below the head can be used to actuate an audio mute condition. This button can also be disabled using the control panel inside the battery compartment. An alternative function that can be actuated by this button is a talkback func-tion. In this state, the transmitter sends a signal to the Venue receiver when the button is pushed - the receiver then switches the audio to a second output which can be routed differently. This function can be used for talkback, cueing or other purposes depending on the application. This functionality requires a Venue receiver with firmware version X.XX or later.† Not available in all countries.Block 26  665.600 - 691.100 Block 27  691.200 - 716.700 Block 28  716.800 - 742.300 Block 29  742.400 - 767.900 Block 30  768.000 - 793.500  Block 779  779.120 - 809.750  Block 31  793.600 - 819.100 Block 32  819.200 - 844.700 Block 33  844.800 - 861.900 Frequency selection:  256 frequencies in 100 kHz steps (except block 23, 606,       33 and 779 - contact Lectrosonics for details)RF Power output:  Selectable at 50 or 100 mW (25 or 50 mW for EU)Pilot tone:    25 to 32 kHz frequency (400 Series only);        5 kHz deviation (3 kHz for EU version)Frequency stability:  ± 0.002%Deviation:  ± 75 kHz (max) (±50 kHz for EU version)Spurious radiation:  90 dB below carrierOperating temperature range:  -30° C to +60° CInput compressor:  Dual envelope compressor, >30 dB rangeGain control range:  44 dB; semi-log menu-driven controlModulation indicators:  Dual bicolor LEDs indicate modulation      of -20, -10, 0 and +10 dB referenced to full      modulation, LCD bar-graph indicatorFrequency response  40 Hz to 20 kHz (+/- 1dB)Low frequency roll-off:  -3 dB @35, 50 and 70 Hz, 36 dB/octave, selectableControls: External:  Programmable mute/talkback button Battery compartment:  Power, mute disable, menu/select, back and up/down        arrow buttons for menu selection and settings.Battery:  2x AA with polarity protection and battery ejectorBattery life:  At 100mW:  5.5 hours (alkaline); 8-10 hours (lithium)     (The HH transmits battery status to Lectrosonics        200 or 400 Series receivers.)Capsule Interface: 1.25” opening and 28 thread pitch     Power available: 5V, 25 mA max     Input impedance: 1000 OhmsWeight:  11.4 oz. with lithium batteries and HHC capsuleDimensions:  9.5” long x 1.97” diameter at largest point  Emission Designator:  XXXXXXXX*Specifications subject to change without notice.† Not all frequency blocks available in all countries. Consult your local representative or contact Lectrosonics for more information.Consumer Alert for US Users - FCC Order DA 10-92Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.   To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be licensed. If you qualify and wish to apply for a license go to: http://www.fcc.gov/Forms/Form601/601.html*This device has not been authorized as required by the rules of the Federal Communications Commission. This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained.

Navigation menu