Lee Technology Korea LT-2004N NUMERIC PAGER User Manual

Lee Technology Korea Co., Ltd. NUMERIC PAGER

Contents

Users Manual

Rechargeable Numeric Pager
User’s Manual
LEE Technology Korea Co., Ltd.
FCC ID : QBTLT-2004N
Trade Name : Rechargeable Numeric Pager
Model No. : LT-2004N
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO
OPERATE THE EQUIPMENT.
Numeric Paging System
Numeric Pager
1) SPEC
z 12 Segments Display
z Rechargeable Battery Included
z 1 Button Switch
z 5 LEDs
z Vibe and LED Flashing Alert
z Maximum 10 Number Can Be Stored.
2) PAGER SETUP
(1) Insert your pager into the slot of its charger base.
(2) The red LED on the top lights up and it indicates the pager is charged properly.
(3) Whenever you remove a charged pager from its slot, red light will blink with the initial
message for 10 seconds.
(4) “READY” is displayed on LCD.
3) POWER ON/OFF
z Press switch more than 3 seconds.
4) PAGE
z The corresponding message is displayed with the alert when paged.
z The alert time is alternative, pager displays “CALL” and blink 2 LEDs
z Press the button to stop alert.
5) FEATURE
(1) Message alert time is selectable in 8, 15, 30, 60 sec.
(2) 8 CANNED MESSAGES are available in PC Software.
(3) Out of Range Message is displayed on LCD with LED Flash.
(4) Available in sending a message to all group pagers.
I need to send some transmitter in for repair - What do I do?
Within warranty period / Covered by our Product-Care Program:
Ship malfunctioning components to the following address:
3rd FL, #499-2 Sang 3-dong, Wonmi-gu, Puchon-city, Kyunggi-do, Korea
Tel: 82-32-678-8605 Fax: 82-32-324-9840
1. Pack the components securely
2. Enclose a note with a brief description of the problem
3. Include a business card
4. Ship the equipment in a traceable manner for your protection. (ie UPS ).
5. Insure the shipment for replacement value.
There are no charges for repaired equipment within the warranty period, or if covered by Product-Care,
other than your shipping costs. We will pay shipping one way back to you.
(Shipping by the courier service is available at an additional charge on request)
Out of warranty items will be repaired and sent back C.O.D.
Hints and Tips
Training is the key to success with a paging system.
Orientating your entire staff and training your host staff on the use of the paging system is key to the
success of the system.
As a part of the general host training program, time must be set aside to teach new hires about the use and
care of the paging system. Be certain staff members understand the importance of asking for the
WARRANTY
LeeTek warrants this product against any defects that are due to faulty material or workmanship for a one-
year period after the original date of consumer purchase. This warranty does not include damage to the
product resulting from accident, misuse or improper electrical connection. Power supplies are warranted
for 60 days. We recommend the use of a surge protector with all equipment. If this product should
become defective within the warranty period, we will repair or replace with equivalent product, free of
charge. We will return your product, transportation charges prepaid standard shipping mode, provided the
product is shipped prepaid to:
LEETEK, 3rd FL #499-2 Sang 3-dong, Wonmi-gu, Puchon-city, Kyunggi-do, KOREA
No return will be received without prior authorization and the proper RMA # posted to the outside of the
shipping container.
This warranty gives you specific legal rights and you may also have rights which vary from state to state.
transmitter back after work.
Benefits of a VISUAL paging system
Staff members are alerted thru the pager and know to quickly close the tab of a guest to help speed table
turns.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient of relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
LEE Technology Korea Co., Ltd.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Navigation menu