Leetac Electronics Technology LEETACE618P Music Center with Bluetooth User Manual rev 1

Zhongshan Leetac Electronics Co., Ltd. Music Center with Bluetooth rev 1

User Manual_rev 1.pdf

INSTRUCTION MANUALMODEL: ITVS-1350EARPHONE OPEN/CLOSEPLAYREP.PRO.COMPACTDIGITAL AUDIO
2CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacleor other outlet unless the blades can be fully inserted to prevent blade exposureWARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid directexposure to laser beam.PRODUCT COMPLIES WITH DHHS RULE 21 CFR SUBCHAPTER J IN EFFECT AT DATEOF MANUFACTUREThis equipment is a Class II or double insulated electrical appliance. It has been designed insuch a way that it does not require a safety connection to electrical earth.Important Safety Instructions1. Read these instructions – All the safety and operating instructions should be read before this productis operated.2. Keep these instructions- The safety and operating instructions should be retained for future reference.3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adheredto.4. Follow all instructions – All operating and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water or moisture – forexample, in a wet basement or near a swimming pool, and the like.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two bladeswith one wider than the other. A grounding plug has two blades and a third grounding prong. The wideblade or the third prong is provided for your safety. If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at the plugs, conveniencereceptacles, and at the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart or rack is used, usecaution when moving the cart/apparatus combination to avoid injury fromtip-over.13. Unplug the apparatus during lighting storms or when unused for longperiods of time.14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has beendamaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objectshave fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped.15.
guidelines, place the product at least 20cm from nearby persons.20. FCC/IC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC/IC’s RF exposure.3-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to thepresence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock.-Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are nouser-serviceable parts inside. Refer servicing to qualified personnel.-The exclamation point within and equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance instructions in the literature accompanying the appliance.16.This equipment is a Class Ċor double insulated electrical appliance. It has been designed in such a waythat it does not require a safety connection to electrical earth.17. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.18. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Theapparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such asvases, shall not be placed on apparatus.19. The use of the equipment in moderate climate.
Before UseChoose unit installation location carefully. Avoid placing it in direct sunlight or close to asource of heat. Also avoid locations subject to vibrations and excessive dust, cold ormoisture. Keep away from sources that hum, such as transformers or motors.Do not open the cabinet as this might result in damage to the circuitry or electrical shock, if aforeign object should get into theset, contact yourdealer.Be sure not to handle discs with dirty fingers. Never insert a disc that has a crack on thesurface.When removing the power plug from the wall outlet, always pull directly on the plug, neverpull the cord.Tokeep the laserpickup clean, donot touch it,and do not forget to close the disc tray.Do not attempt to clean the unit with chemical solvents as this might damage the finish. Usea clean, drycloth.In order to shut off the power to this product completely, unplug the power cord from the walloutlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time,such as a vacation.Keep this manual in a safe place for future reference.Beware of CondensationWhen the player (or a compact disc) is moved from a cold to a warm place or is used after asudden temperature change, there is a danger of condensation. Water vapor in the air couldcondense on the mechanism or the laser pickup. If droplets of water form on these parts,correct playback will be impossible because the laser cannot read the information from thedisc correctly. To prevent this, if you are going to use the player in a condition wherecondensation could occur, you should leave the player for 1 or 2 hours after plugging it intoan AC outlet depending on the amount of condensation. If this is done, the player willstabilize at the temperature of itssurroundings.4
5Compact DiscHanding the Discs:This unit has been designed specifically for sound reproduction from compact discsbearing the mark.No other discs can be used.1. Always place the compact disc in the disc tray with the label facing upward. (compactdiscs can be played only on one side).2. To remove a disc from its storage case, press down on the centre of the case and lift thedisc out, holding it carefully bythe edge.3. Fingerprints and dust should be carefully wiped off the disc recorded surface with a cleancloth (not included).4. Never use chemicals such as: record sprays, anti-static sprays or fluid, benzene orthinner to clean compact discs. Such chemicals will do irreparable damage to the disc'splastic surface.5. Discs should be returned to their cases after use to avoid serious scratches that couldcause the laser pick up to skip.6. Do not expose discs to direct sunlight or high humidity and temperature for extendedperiods.7. Do not stick paper or write anything with a ballpoint pen on the surface of the label side.8. Do not use irregular shaped CD's (octagonal, heart-shape, etc.), all of which can damagethe unit.CLEAN FROM CENTRE TO EDGEHANDLE DISC ONLY AS SHOWNCleaning to Compact Disc
6Parts In structio n1. SPEAKERS2. AM/FM DIAL SCALE3. OFF/VOLUME/ON KNOB4. LED DISPLAY5. EARPHONE JACK6. TONE KNOB7. CD DRAWER8. FUNCTION SELECTION KNOB (FM/AM/CD/BT)9. TUNING KNOB10.OPEN/CLOSE BUTTON11. PLAY/PAUSE BUTTON12. STOP BUTTON13. REPEAT BUTTON14. PROGRAM BUTTON15. F F BUTTON16. F R BUTTON17. FM ANTENNA18. AC CORD1718
7Bas i c Operat i o n1. Power on.Connect the power plug into the wall outlet.2. Select the source.3. Rotate the VOLUME knob clockwise to turn the radioon and adjust to desired sound level.4. Rotate the TONE knob clockwise or counterclockwise to adjust the tone.23TONEFMAMCD5. Listening through Earphones/Headphones.45EARPHONE OPEN/CLOSEPLAYREP.PRO.COMPACTDIGITAL AUDIO
83. The CD will start playing from the first track.4.Press the FF button once to go the start of the next track.5. Press the FR button once to go back to the start of the current track. Press the FR buttontwice to go back to the start of the previous track.You can reverse or forward to any point in a selected track by pushing and holding theF R or F F button.NOTE: Do not push both buttons together as this may damage the unit.As the unit is tracking quickly, forward or backward you will hear your selection playing at adistorted speed. Simply release the depressed button to continue playing at normal speedat the desired position in the selected track.1.Rotate the FUNCTION knob to select CD function.Li s teni n g to a CD/MP32. Press the OPEN/CLOSE button to open the tray, and place the CD disc on the tray. Press the OPEN/CLOSE button again to close the tray. OPEN/CL OSECD should be placed on the tray with the label side up.Or press PLAY/PAUSE button to start playback.6.7.Do not switch the unit off while playing CD as this will damage the unit.Press the PLAY/PAUSE button to pause the CD play and the CD indicator won’t lit. Press the PLAY/PAUSE button again to resume playback and the CD indicator stay lit.FMAMCD
98. PRepeat Play:Press the REPEAT button to step through the available repeat mode – repeat 1, repeat all or off.Selecting Repeat 1 will continuously repeat the current track, the repeat indicator will flash.Selecting Repeat All will repeat the entire disc continuously, the repeat indicator stay lit.When select off, the repeat indicator won’t light up.NOTE: If play is stopped, repeat modes are cleared.Programmed Play:While the disc stops, you can store a programmed selection from the disc in your preferred sequence.To set a program:1. Press Stop button to stop CD play.2. Press Program button. Program indicator will light up and the 01 will start flashing on the display (the position of this track in the program).3. Select a track you want to program by pressing the FF or FR button.4. To save this track into the program sequence, just press the Program button again.Then the 02 will start flashing on the display (this is the second track in the program).5. Repeat step 3 and 4 until you have stored all the tracks in the program sequence.NOTE: During setting a program do not press the Stop button unless you want to start to set from the start again.Playing the program:Press the Play/Pause button to start the program playing.Selecting tracks:You can navigate through the tracks stored in the program by pressing the FF or FR button.Press the FF button once to go the start of the next track.Press the FR button once will go back to the start of the previous track.Clear the program:Press the Stop button to stop a play.Press the Stop button again to clear the program, and then the program indicator won’t light.Repeat modes:Repeat modes may be selected when a program is playing.ress STOP button to stop the CD play.
This unit can let you enjoy music from external devices which have a built-in Bluetooth feature.1. Rotate the FUNCTION knob to select BT function. The BT indicator starts flashing.2. Set the Bluetooth function of your external device when the apparatus is on.3. Set to search Bluetooth device on your external device.NOTE: The effective distance between your external device and this apparatus is 10 meters.4. Wait for a while then find the “ITVS-1350 ” on the paired devices list on your external device and press “ ”. If sometimes A window will ask you a password. Fill in “0000” then press “OK” on your external device.5. A few seconds later your Bluetooth connection is success.6. Turn on the music player program on your external device and set it play. Note: Fast forward / rewind is only available on your external device.1 2LListening to External Audio via Bluetoothis tening t o t he Radio1. Rotate the FUNCTION knob to select the FM or AMfunction.2. Tune to the desired frequency.TUNING10Adjusting for Best ReceptionAM broadcast: Rotate the unit to find the best position.FM broadcast: Extend and reposition the FM antenna.ITVS-1350FMAMCDFMAMCDEARPHONE OPEN/CLOSEPLAYREP.PRO.COMPACTDIGITAL AUDIO
Spec i ficat i on sAMPL IFIER sect i o nOutput Power...................................1 x 2.0 WFrequency Response........................60 to 20, 000 HzTUNER sect ionFM Secti onFrequency Range................ ............88 to 108 MHzAM Sec tio nFrequency Range.............................520 to 1710 KHzCD PL AYER s ec ti o nFrequency Response........................60 to 20, 000 Hz +/-4 dBSignal-to-Noise Ratio........................55 dB (IEC-A)SPEA KER SYSTEM s ec t io nType...............................................1-wayImpedance...................................... ohmsInput Power.....................................Max.10WGENERA LPower Requirements........................AC 120V~ 60HzPower Consumption.........................20 WDimensions(WxHxD)........................30 x 24 x 35.5 cm(approx.)Weight............................................9.9 Ibs. (approx.)Standard Accessories.......................Operating Instruction Booklet411BLUETOOTHBluetooth Version...............................Bluetooth V2.1+EDRBluetooth Profiles................................A2DP, AVRCP, GAVDP, HFP, HSP, IOPBluetooth Frequency range...................210 meters (33 ft.).402GHz-2.480GHzOperating Distance..............................
Connect the unit to the ACpower supply.Ad just th e volume. R e-select the desired inputsource.Turn off the TV or otherappliance, and relocate theunit.Properly tune-in the desireds t a t i o n . T u r n - o f f t h einterfering TV set.Re-orient the antenna untilreception improves.Insert the CD w it h t heprinted side right-side up.Carefully clean and dry theCD.P r e s s t h e P L AY / P A U S Ebutton.The CD should be changed.Carefully clean the CD.Th e volume is turneddown (to MIN). The inputselector does not matchthe playback source.The unit is too close to aTV set or another similarappliance.The antenna is notoriented properly.T h e C D i s i n s e r t e dupside down. The CD isdusty or dirty or there iscondensation on the CD.The CD is scratched,damaged or warped. Thedisc is very dirty.The station is not tuned-in properly. A TV set isbeing used nearby and isinterfering with the radioreception.The CD player is paused.Unit is unplugged.12Cannot listen to any station,or signal appears weak.The sound is distorted.CD stops immediately afterstarting, or unit pauses orstops during play.Specific CD is noisy, orplayback stops or skips.Power does not come onwhen the power switch ispressed.No sound comes out ofthe speakers.The sound is noisy.No sound.Tro ublesh ooti n g Gu i deIn case of trouble with the unit, please look through this chart and see if you can solve theproblem by yourself before calling your dealer.Pr ob l em Cau s e So l ut i onTHE WHOLE UNITTUNER UNITCD PLAYER
13xNo soundxThe unit is notswitched toBluetooth modexYour device’s and/orthe unit’s volume isnot turn up.xYour device is too farfrom the unit orthere’re someobstacle betweenyour device and theunitxEnsure the unit isswitched to BT mode.xMove your Bluetoothdevice closer to unitxTurn up the volume onyour portable deviceand/or the unit.xTurn OFF yourBluetooth device andunit. Then power themboth back ONxSound has a lot ofsta cxYour device is too farawayxBring your devicecloser to the turntablexUnable to pair with aBluetooth devicexYour device doesn’thave Bluetoothconnec vity.xThe Bluetoothpairing is notsuccessfulxConĮrm that yourdevice is Bluetoothcompa ble.xRe-pair the unit anddevice again.BLUETOOTHFCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.WARNING: Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate this equipment.
14INDUSTRY CANADAThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) this device may not cause interference, and (2) this device must accept anyinterference, including interference that may cause undesired operation of the device.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type andmaximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radiointerference to other users, the antenna type and its gain should be so chosen that the equivalent isotropicallyradiated power (e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur parIndustrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autresutilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnéeéquivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire debrouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu