Leetac Electronics Technology LEETACIT200 Music Center With Bluetooth User Manual E 6B01 IM
Zhongshan Leetac Electronics Co., Ltd. Music Center With Bluetooth E 6B01 IM
Manual_2015-4-29_User Manual.pdf
MODEL: ITVS-200B Music Center with Bluetooth Important Safety Instructions.........................................................................................................................2 Product Overview ..........................................................................................................................................3 Setup / Basic Operation ................................................................................................................................7 Listening to a Vinyl Record............................................................................................................................7 Listening to a CD...........................................................................................................................................8 Listening to the FM Radio .............................................................................................................................9 Listening to an External Audio Device (AUX Mode) ......................................................................................9 Listening to an External Audio Device (BT Mode) .........................................................................................9 Listening to a Cassette Tape .......................................................................................................................10 Maintenance / Proper Handling ...................................................................................................................10 Specifications ..............................................................................................................................................12 Troubleshooting Guide ................................................................................................................................13 FCC Statement ............................................................................................................................................15 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT: RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam. PRODUCT COMPLIES WITH DHHS RULE 21 CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 1. Important Safety Instructions Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions- The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug the apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. -This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. -The exclamation point within and equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. 16. This equipment is a Class Ⅱ or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 17. The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 18. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus. 19. The use of the equipment in moderate climate. ACCESSORIES INCLUDED • RCA LINE OUT CABLE • INSTRUCTION MANUAL • WARRANTY (BACK OF MANUAL) • 45 RPM ADAPTER Product Overview Front View 1. POWER Push to turn the unit on or off. 2. “PHONO, CD, AUX, FM/ ” SELECTION KNOB Rotate to select your desire function. 3. “FM”, “ ” SLIDE SWITCH Slide to select listens to FM or Bluetooth. 4. 3.5mm AUX IN JACK Connect your external source to the AUX IN jack. 5. PLAY INDICATOR Illuminates when CD is playing. 6. ST/BT INDICATOR Blue light flash when the unit is waiting for getting paired. Blue light stay lit when the external device is connected to the unit. Red light illuminates the station received is under stereo playing. 7. PROGRAM INDICATOR Illuminates the program playback is set. 8. REPEAT INDICATOR Red light stay lit illuminates all tracks repeat. Red light flash when single track is repeating. (Note: This indicator only works in CD mode.) 9. LED DISPLAY 10. TUNING DIAL POINTER 11. STEREO SPEAKERS 12. STOP Press to stop playback or cancel the program setting. 13. PLAY/PAUSE Press to start playback, press again to pause. (Note: This button only works in CD, Bluetooth mode.) 14. OPEN/CLOSE In CD mode, use to open and close the disc tray. 15. DISC TRAY 16. “VOLUME” KNOB Turn to adjust volume. 17/18. NEXT/PREVIOUS TRACK 19. 20. 21. 22. & FF/REWIND In CD Mode, press once to skip to the next/previous track. Press and hold to fast forward/rewind. (Note: This button will not work in PHONO, FM, AUX mode) “PROGRAM” Press to set the program playback. (Note: This indicator only works in CD mode.) “REAPEAT” Press to select the repeat mode. (Note: This indicator only works in CD mode.) RADIO TUNER KNOB In FM mode, turn to tune in a station. 3.5mm EARPHONE JACK Accepts headphone/earphone plugs. Left side View 23. CASSETTE FF & EJECT Press halfway to fast forward, press all the way to end and eject the tape. Rear View 24. FM wire antenna While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception. 25. LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. 26. AC Power Cord Connect the AC plugs into a wall outlet. You’re strongly recommended that this product should be operated only from the type of power source indicated on the marking label. Parts of the Turntable A. Turntable. B. Safety Screw (for transport) Before using the unit, turn the screw clockwise using a coin or screwdriver. Important: When you transport the unit, turn the screw counterclockwise to secure the turntable. C. Speed Selector. D. Tone Arm holder. E. Tone Arm. Before use, completely loosen the fixed rope on the tone arm and lift the tone arm up. F. STYLUS G. 45 RPM adaptor. Setup / Basic Operation Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the AC power cord to a wall outlet. Note: -You’re strongly recommended that this product should be operated only from the type of power source indicated on the marking label. -To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation 1. Push the POWER button to turn the unit on. 2. Select the source by rotate the selection knob ( PHONO/AUX/CD/FM/ BT). 3. Rotate the VOLUME knob to adjust to the desired sound level. Listening through RCA LINE OUT For amplifier device listening, first reduce the volume level to minimum. Insert the white and red plugs on the RCA cable into the unit, then insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. Listening through Earphones/Headphones (not included) For private listening, first reduce the volume level to minimum. Insert your headphones’ plug into the 3.5mm jack, then adjust the volume up by turning the VOLUME knob. Note: The speakers will automatically be deactivated while headphones are plugged in. CONDENSATION WARNING: When the unit is moved from a cold or warm place, or is used following a sudden temperature change, there is the danger that water vapor in the air may condense on the unit, preventing proper operation. In such cases, leave the unit for 1-2 hours after plugging it into an AC outlet to allow it to stabilize at the temperature of its surroundings. Listening to a Vinyl Record 1. Select “PHONO” function. 2. Gently open the top cover. Note: Be careful not to pinch your finger when opening/closing the top cover. 3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor. 4. Select the appropriate speed (4). 5. Remove the tone arm-rest holder to release the tone arm. 6. Move the tone arm gently to the edge of the record (or the starting point of a track). 7. The turntable will begin to turn. When the record reaches its end, tone arm will stop at the center of the record and you must lift and return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone arm. Important: - Closing the top cover will help prevent dust from settling on the turntable. - Always relock the tone arm clip before transporting the unit. - Do not place anything on top of the turntable cover, especially while playing a record. Listening to a CD 1. Select “CD” function. (Note: When no disc is set, “no” will appear on the display.) 2. Press the OPEN/CLOSE button (Note: This button only works in CD mode.) 3. Place a disc on the tray with the printed label face up. to close the tray. 4. Press the OPEN/CLOSE button 5. Press the PLAY/PAUSE button ( ) to begin playback. (Note: The CD playback will start automatically.) 6. To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume. 7. To skip tracks forward or backward, press the corresponding skip button ( or ). Pressing once will restart the current track. Pressing twice in succession will return to the beginning of the previous track. 8. To fast forward / rewind within a track, press and hold down the corresponding skip button until the desired position is reached. button 9. To stop playback, press the STOP Important: - Never place more than one disc on the tray. - The disc must be placed in the center of the disc tray. An incorrectly loaded disc can permanently damage the tray door mechanism. - Do not push the CD tray – always use the OPEN/CLOSE button. - It takes a moment for the unit to load a disc, during which all buttons will be temporarily deactivated. Repeat Playback Each time the REPEAT button is pressed, the repeat mode will cycle through the following options: REPEAT 1(Repeat one track) The repeat indicator will flash and the current track will be played repeatedly. If you press the ( or ) button to select another track, the track you select will be played repeatedly. REPEAT ALL (Repeat the entire CD) The repeat indicator will stay lit and the entire CD will be played repeatedly. Notes: - Repeat playback works with CD discs only. Programmed Playback Up to 20 tracks can be programmed to play in the desired order. Notes: - Programmed playback works with CD discs only. 1. Select “CD” mode, then load a CD. 2. While the CD is stopped, press the PROGRAM button. 3. “PROGRAM” indicator lights up and “01” blinks on the display. or ) to select a track number. 4. Press ( 5. Press the PROGRAM button again to set the next program track, “02” appears and blinks.. Repeat steps 4 thru 5 to program the additional tracks. 6. When the selection of track numbers has been finished, press the PLAY button ( ) to start program playback. (Note: when all 20 program tracks are set, you press PROGRAM button and “FU” will appears on the display) 7. To cancel the program mode, press the STOP ( ) till the program indicator won’t light. To check the programmed order In the stop mode, press ( or programmed. ) repeatedly to show the track numbers that have been To add a track to the end of the programmed order: In the stop mode, press the PROGRAM button. or ), then press the PROGRAM button. Select a track number by pressing ( The current track will be added to the end of the program. Listening to the FM Radio 1. Select “FM/ ” mode. 2. Slide the slide switch on “FM”. 3. Tune to the desired station using the Radio Tuner Knob. Note: In FM Mode, the “ST/BT” indicator lights up red when tuning in the stereo reception station. Adjusting for Best Reception FM broadcast: Extend and reposition the FM antenna. Listening to an External Audio Device (AUX Mode) In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player, Portable CD Player, etc.) There is a AUX IN jack on the front side of the unit. When connecting a device that has a headphone jack, use the cable with 3.5mm plugs on either end with the front AUX IN jack. 1. Plug one end of the AUX IN cable (not included) into the AUX IN jack. 2. Plug the other end of the cable into the headphone jack of the external audio source. NOTE: All operations are only available on your external device. Important: If the front AUX IN and rear RCA LINE OUT are connected at the same time, only the front AUX IN will be active. Listening to an External Audio Device (BT Mode) In BT (Bluetooth) mode, this unit can enjoy music from external devices which have a built‐in Bluetooth feature. GETTING CONNECTED USING BLUETOOTH 1. Select “FM/ ” mode. 2. Slide the slide switch on “ ” and the ST/BT indicator will flash blue. 3. Set the Bluetooth function of your external device when the apparatus is on. 4. Set to search Bluetooth device on your external device. NOTE: The effective distance between your external device and this apparatus is 10 meters. 4. Wait for a while then find the “Wooden Music Center” on the paired devices list on your external device and press “Wooden Music Center”. If sometimes A window will ask you a password. Fill in “0000” then press “OK” on your external device. 5. A few seconds later your Bluetooth connection is success and the blue indicator stay lit. 6. Press the PLAY/PAUSE button ( ) to begin playback. 7. To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume. or ) to listen. 8. To skip to the previous or next tracks, press the corresponding skip button ( NOTE: Stop, fast forward / rewind is only available on your external device. Listening to a Cassette Tape 1. Load an audio cassette tape into the unit (located on the left side of the unit). Playback will automatically begin. 2. Press button halfway to Fast Forward the tape. Press button lightly and playback will resume. 3. Press button completely down to end playback and eject tape. NOTE: When loading in a cassette tape, the SELECTION knob is not work and all other modes are not work. Maintenance / Proper Handling Compact Disc Handling Always place the disc on the disc tray with the label side facing upward (compact discs can be played/recorded only on one side) • To remove a disc from its storage case, press down on the center of the case and lift the disc upward, holding it carefully by its edges. • To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth. • Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean discs; they will irreparably damage the disc’s plastic surface. • Discs should be returned to their cases after use to protect from dust and scratches. • Do not expose discs to direct sunlight, high humidity, or high temperature for extended periods of time. • Printable CD-R and CD-RW discs are not recommended, as the label side may become sticky and damage the unit. • Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ball-point or hard-tipped pen, as doing so may damage the recorded side. • Do not use irregularly-shaped CDs (octagonal, heart shaped, business card size, etc), as they will damage the unit. • Read all precautions supplied with any CD-R or CD-RW disc • Never handle a disc with dirty fingers. • Never insert a disc that has a crack on the surface. • Handling Vinyl Records Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your record’s quality to deteriorate. • To clean a record, use a soft anti-static cloth to gently wipe the record surface. • Keep records in their protective sleeves when not in use. • Always store records upright on their edges • Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), or in a location subject to vibration, excessive dust, heat, cold or moisture. • 10 General Care When removing the power plug from the wall outlet, always pull directly on the plug. Never pull the cord. • To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray. • Do not attempt to clean the unit with chemical solvents as this might damage the finish. • For cleaning, only use a clean, dry cloth. • In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time. • How to Replace the Turntable Stylus The stylus should last about 50 hours under normal use. However, it is recommenced that the stylus be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus may damage the record. The highest speed of 78 RPM records would wear out the stylus more quickly. Removing the old stylus: 1. Set a screwdriver at the tip of the stylus and push downward (A). 2. Remove the stylus by pulling it simultaneously downward and forward. Installing a new stylus: 1. Hold the front tip of the stylus and insert its rear edge (B) first. 2. Push the stylus upwards (C) until the tip locks into place. Caution: z Do not bend the stylus. z Do not touch the needle to avoid injury your hand. z Turn off the unit’s power before you replace the stylus. z Keep out of reach of children. 11 Specifications GENERAL Power Requirements Power Consumption Dimensions (W x H x D) Weight AC 120 V~ 60 Hz 30W 460 x 255 x 340mm (approx.) 7 kg. (approx.) AMPLIFIER Output Power Frequency Response 5W+5W 60 to 20, 000 Hz SPEAKER SYSTEM Type Impedance Output Power 2-way 8 ohms Max. 6W FM Radio Range 88 to 108 MHz CD PLAYER Frequency Response Signal-to-Noise Ratio 60 to 20, 000 Hz +/-4 dB 55 dB (IEC-A) CASSETTE PLAYER Track System Tape Speed Wow and Flutter Frequency Response 4 Track, 2 channel stereo 4.8 cm/sec 0.4% (WRMS) 125 to 6300 Hz +/-6 dB RECORD PLAYER Motor Drive System Speeds S/N Ratio Cartridge Type Stylus DC servo motor Belt Drive 33-1/3rpm, 45 rpm and 78 rpm More than 50 dB Ceramic Stereo Cartridge 402-M208-165 BLUETOOTH Bluetooth Version Bluetooth Profiles Bluetooth Frequency range Operating Distance Bluetooth V2.1 A2DP, AVRCP 2.402GHz-2.480GHz 10 meters 12 Troubleshooting Guide Symptom Possible Cause Solution • Unit will not power on. • Unit • Connect sound output from speakers. • The • The TAPE GENERAL • No • Noise/Distortion in FM RADIO CD PLAYER • The unit is too close to a TV set or another interfering device. • Turn cassette tape is not inserted properly. • The tape has reached the end. • The station is not tuned-in properly. • A TV set is being used nearby and is interfering with the radio reception. • The antenna is not oriented properly. • Properly • CD stops immediately after starting, or unit pauses or stops during play. • No sound. • The • Insert • CD • The sound output. • Unit fails to respond. • It • The tape does not play. • The listen to any station, or signal appears weak. • The sound is distorted. playback is noisy, or playback stops or skips. • CD tray will not open. • Buttons are not functioning correctly. PHONO volume level is set too low. input selector does not match the playback source. the unit to the AC power supply. • Adjust the volume. • Select the correct input source. off the TV or other appliance, and relocate the unit. • Disconnect the power cord and external audio device. Re-plug the power cord after one minute. • Insert the cassette tape correctly. • Flip the cassette. • Cannot AUX is unplugged. might result from external factors such as ESD (Electro-static discharge). CD is inserted upside down. • The CD is dusty or dirty or there is condensation on the CD. • The CD player is paused. the antenna until reception improves. CD is scratched, damaged or warped. • The disc is very dirty. • AM/FM • Select mode is selected. • The unit is processing information (“--- Busy” is displayed) • The unit needs to be restarted • The • No • Both sound output with external audio device plugged into rear AUX in jack. • Re-orient the CD with the printed side right-side up. • Carefully clean and dry the CD. • Press the PLAY/PAUSE button. • Replace CD with an undamaged one. • Carefully clean the CD. • Decline in turntable audio performance tune-in the desired station. • Turn-off the interfering TV set. turntable stylus is worn out AUX in jacks (front and rear) are plugged. 13 AUX, PHONO, CD, or TAPE mode. • Wait until the unit finishes processing. • Turn the unit off, then on again. • Replace the stylus. • Unplug Jack. the front AUX in Bluetooth • No sound • Sound • Unable is garbled to pair with a Bluetooth device • The unit is not switch to Bluetooth mode • Your device’s and/or the unit’s volume not turn up. • Your device is too far from the unit or there’re some obstacle between your device and the unit • Your device’s and/or the unit’s volume not adjust properly. • Your device doesn’t have Bluetooth connectivity. • The Bluetooth pairing is not successful 14 • Ensure the unit is switched to Aux/ BT mode. • Move your Bluetooth device closer to unit • Turn up the volume on your portable device and/or the unit. • Turn off your Bluetooth device and unit then power them both back on • Turn down the volume on your device/phone and the unit • Confirm that your device is Bluetooth compatible. • Repair the unit and device again. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. CALIFORNIA PROP 65 WARNING "WARNING" This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website address : http://www.oehha.ca.gov/prop65.html 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.351735, 2008/07/22-18:11:12 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2015:03:06 09:36:45+08:00 Create Date : 2015:03:06 09:34:48+08:00 Metadata Date : 2015:03:06 09:36:45+08:00 Thumbnail Width : 172 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22110 bytes, use -b option to extract) Format : application/pdf Title : Microsoft Word - E-6B01 IM 认证用 Creator : kfrzwy Document ID : uuid:e22fd95c-988c-4297-a827-a03db0662187 Instance ID : uuid:61f5ad56-6cec-4433-9b78-90cf38907cda Rendition Class : proof:pdf N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 209.980292 Max Page Size H : 297.038889 Max Page Size Unit : Millimeters Font Name : Calibri-Bold, Arial-BoldMT, Calibri, ArialMT, TimesNewRomanPSMT Font Family : Calibri, Arial, Calibri, Arial, Times New Roman Font Face : Bold, Bold, Regular, Regular, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.62, Version 5.06, Version 5.62, Version 5.06, Version 5.05 Font Composite : False, False, False, False, False Font File Name : calibrib.ttf, arialbd.ttf, calibri.ttf, arial.ttf, times.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Page Count : 15 Author : kfrzwyEXIF Metadata provided by EXIF.tools