Leica Geosystems CPD LD4BT Handheld Laser Distance Meter User Manual I

Leica Geosystems AG, CPD Handheld Laser Distance Meter I

Contents

user manual I

Leica DISTOTM E7500iThe original laser distance meter
Leica DISTOTM E7500i 792324 1ENTable of ContentsInstrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - 2Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2Basic measuring screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3Selection screen- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - 4Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Multifunctional endpiece - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Permament / Minimum-Maximum measuring- - - - - - - - - - - - - 5Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - 6Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7Tilt units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7Distance units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8Beep ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8Digital level ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8De-/Activate keypad lock - - - - - - - - - - - - - - - - - - - - - - - - - - 9Unlock keypad- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9Personalized favorites - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9Illumination - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9De-/Activate Bluetooth Smart- - - - - - - - - - - - - - - - - - - - - - 10Calibration of tilt sensor (Tilt Calibration) - - - - - - - - - - - - - - 11Reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12Offset- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12Functions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Timer- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Calculator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Adjusting measuring reference/tripod - - - - - - - - - - - - - - - - - 14Memory- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14Measuring single distance - - - - - - - - - - - - - - - - - - - - - - - - - - 15Smart Horizontal Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - 15Height-profile measurement - - - - - - - - - - - - - - - - - - - - - - - - 16Area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18Triangular area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19Long range mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19Inclination tracking- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20Sloped objects - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20Height tracking - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21Trapezium - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - 27Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Disposal- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Electromagnetic Compatibility (EMC) - - - - - - - - - - - - - - - - - 28FCC statement (applicable in U.S.) - - - - - - - - - - - - - - - - - - - 29Use of the product with Bluetooth® - - - - - - - - - - - - - - - - - - 29Laser classification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30
Leica DISTOTM E7500i 792324 2ENInstrument Set-upIntroductionThe safety instructions and the user manual should be read through carefully before the product is used for the first time.The person responsible for the product must ensure that all users understand these directions and adhere to them.The symbols used have the following meanings:WARNINGIndicates a potentially hazardous situation or an unintended use which, if not avoided, will result in death or serious injury.CAUTIONIndicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor injury and/or appreciable material, financial and environmental damage.Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner.iOverviewDisplayOn/MeasurePointfinder(Viewscreen)NavigationClear / OffSelection keys linked to sym-bols aboveReturn / EqualFunction screenAdd / Subtract
Leica DISTOTM E7500i 792324 3ENInstrument Set-upBasic measuring screenStatus barFavoritesMain lineActive functionSelection screenPage indicatorSettingsFunction /SettingsHelp function
Leica DISTOTM E7500i 792324 4ENInstrument Set-upPointfinder (Viewscreen)1xZoom stageFavoritesIlluminationadjustmentwith navigationkeys left andrightActive functionZoom (1x, 2x, 4x) with navigation keys up and downCrosshairInsert batteriesiTo ensure a reliable use, do not use zinc-carbon batteries. We recommend using high quality batteries.Change batteries when battery symbol is flashing.
Leica DISTOTM E7500i 792324 5ENOperationsSwitching ON/OFF Clear Message CodesONOFF2 secDevice is turned OFF.iPress ON button 2 sec to start continuous laser mode. If no key is pressed for 180 sec, the device switches off au-tomatically.1xUndo last action.2xLeave actual func-tion, go to default operation mode.If the info icon appears with a number, observe the instructions in section "Message Codes". Example:Multifunctional endpieceiThe orientation of the endpiece is automatically detected and the zero point is accordingly ad-justed. Permament / Minimum-Maximum measuring12 sec8.532 mUsed to measure room diagonals (maximum val-ues) or horizontal distance (minimum values)The minimum and maximum dis-tance measured is displayed (min, max.). The last value measured is displayed in the main line.min. max.2Stops permanent / minimum-maximum measuring.3
Leica DISTOTM E7500i 792324 6ENOperationsAdd / Subtract7.332 m1The next meas-urement is added to the previous one.2The next meas-urement is sub-tracted from the previous one.2x7.332 m12.847 m320.179 m4iThis process can be repeated as required. The same process can be used for adding or subtracting areas or volumes.Pointfinder (Viewscreen)1x11x2x4x24x2x1x1x3Exit pointfinder (viewscreen).4iThis is a great help for outdoor measuring. The integrated pointfinder (viewscreen) shows the target on the display. The device measures in the middle of the cross hair, even if the laser dot is not visible. Parallax errors occur when the pointfinder camera is used on close targets, with the effect that the laser appears dis-placed in the crosshair. In this case rely on the real laser dot.
Leica DISTOTM E7500i 792324 7ENSettingsOverview12Tilt unitsDistance unitsBeepDigital levelKeypad lockFavoritesIlluminationBluethooth®Tilt calibrationResetOffsetTilt units12± 90.0°± 180.0°360.0°0.00 %0.0 mm/m0.00 in/ftSwitch between the following units:34Confirm setting.Exit settings.5
Leica DISTOTM E7500i 792324 8ENSettingsDistance units120.0000 m0.000 m0.00 m0.0 mm0.00 ft0‘00‘‘ 1/320‘00‘‘ 1/160‘00‘‘ 1/80‘00‘‘ 1/4 0.0 in 0 in 1/320 in 1/160 in 1/80 in 1/40.000 ydSwitch between the following units:34Confirm setting.Exit settings.5Beep ON/OFF1ON2To switch ON, repeat procedure.OFFExit settings.3Digital level ON/OFF1ON2To switch ON, repeat procedure.OFFExit settings.3iThe digital level is displayed in the status line.
Leica DISTOTM E7500i 792324 9ENSettingsDe-/Activate keypad lock Unlock keypad1OFF2To deactivate, repeat procedure.ONExit settings.31within 2 sec2Personalized favorites123Select favorite function.4Press selection key left or right. Function is set as favorite above the corresponding se-lection key.Exit settings.5iSelect your favorite functions for quick access. Short cut:Press 2 sec on a selection-key in the measuring mode. Illumination11/621/62/63/64/65/66/63Select brightness.4Confirm setting.Exit settings.5iTo save power re-duce bright-ness if not necessary.
Leica DISTOTM E7500i 792324 10ENSettingsDe-/Activate Bluetooth Smart1ON2To switch ON, repeat procedure.OFFExit settings.3iDefault mode: Bluetooth is switched on. Bluetooth icon in status line is dis-played if device is connected with Bluetooth.iSwitch on Bluetooth Smart in Settings.Connect the device with your smart phone, pad, laptop,…A blue Bluetooth symbol appears on the laser distance meter if the connection is established.Bluetooth switches off as soon as the laser distance meter is switched off.The efficient and innovative Bluetooth Smart module (with the new Bluetooth standard V4.0) works together with all Bluetooth Smart Ready devices. All other Bluetooth devices do not support the energy saving Bluetooth Smart Module, which is integrated in the device.We provide no warranty for free DISTO™ software and offer no sup-port for it. We accept no liability whatsoever arising from the use of the free software and we are not obliged to provide corrections nor to develop upgrades. A wide range of commercial software can be found on our homepage. Apps for Android® or Mac iOS can be found in special internet shops. For more details, see our homepage.
Leica DISTOTM E7500i 792324 11ENSettingsCalibration of tilt sensor (Tilt Calibration)123Place device on absolutely flat surface.180°4180°5Turn the device horizontally by 180° and place it again on absolutely flat surface.67Place device on absolutely flat surface.180°8180°9Turn the device horizontally by 180° and place it again on absolutely flat surface.10iAfter 2 sec the device goes back to the basic mode.
Leica DISTOTM E7500i 792324 12ENSettingsReset1Resetdevice?2Second confirmation with selection keys:3Refuse: Confirm:Exit settings.4iReset returns the instrument to the factory settings. All custom-ized settings and memories are lost.Offset121.012 m3Select digit.1.012 m4Adjust digit.5Approve value.Exit settings.6iAn offset adds or subtracts a specified value automatically to or from all measurements. This func-tion allows tolerances to be taken into account. The offset icon is displayed.
Leica DISTOTM E7500i 792324 13ENFunctionsOverviewTimerCalculatorAdjusting measuring referenceMemorySingle Distance MeasurementSmart Horizontal ModeAreaVolumeTriangle areaLong Range ModeHeight-profile MeasurementInclination TrackingHeight TrackingTrapeziumStake outPythagoras 1Measuring on sloped objectsPythagoras 2Timer12Off30 sec5 sec2 sec3Select release time.4Confirm setting.iThe self release starts if ON/Measure key is pressed.Calculator123Select key on display.Confirm every key.iThe measurement result from the main line is taken over to the cal-culator and can be used for fur-ther calculations. Ft/in fractions are converted into Meters.
Leica DISTOTM E7500i 792324 14ENFunctionsAdjusting measuring reference/tripod123Distance is measured from the rear of the device (standard setting).Distance is measured from the front of the device (lock symbol = permanently).Distance is measured from the tripod thread permanently.4Confirm setting.iIf device is switched off, reference goes back to standard setting (rear of the device).Memory1212.208 m6.554 m23.889 m3Switch between measurements.4Use Up/Down navigation keys to show more re-sults.iShort cut
Leica DISTOTM E7500i 792324 15ENFunctionsMeasuring single distance12Aim active laser at target.38.532 m4iTarget surfaces: Measuring errors can occur when measuring to colourless liquids, glass, styrofoam or semi-permea-ble surfaces or when aiming at high gloss surfaces. Against dark surfaces the measuring time in-creases.Smart Horizontal Mode12Aim laser at tar-get.3zxy40.8 °xyz5.204 m0.032 m4.827 m4(up to 360° and a transverse tilt of ±10°)
Leica DISTOTM E7500i 792324 16ENFunctionsHeight-profile measurement12REF0Aim at reference point (REF).34REF102345hdAim at additional points 1-x.5dh2.042 m0.054 mHorizontal distance to deviceHeight difference to reference point (REF). 6Exit function.7iIdeal for measuring of height differences to a reference point. Can be also used to meas-ure profiles and terrain sections. After meas-uring the reference point, the horizontal distance and height is displayed for each fol-lowing point.
Leica DISTOTM E7500i 792324 17ENFunctionsArea123Aim laser at first target point.45Aim laser at sec-ond target point.20.276 m 3.9I0 m 6.228 m24.352 m2First distanceSecond distanceCircumferenceArea6iThe result is shown in the main line and the measured value above. Partial Measurements / Painter function: Press + or - after starting the first measure-ment. Measure and add or subtract distanc-es. Finish with DIST. Measure 2nd length.
Leica DISTOTM E7500i 792324 18ENFunctionsVolume123Aim laser at first target point.45Aim laser at sec-ond target point.67Aim laser at third target point.24.224 m2208.703 m280.208 m78.694 m3CircumferenceWall areasCeiling/floor areaVolume89Use Up/Down navigation keys to show more re-sults.
Leica DISTOTM E7500i 792324 19ENFunctionsTriangular area123Aim laser at first target point.45Aim laser at sec-ond target point.67Aim laser at third target point.89.90°23.563 m23.813 m2CircumferenceAngle between first and second measurementTriangular area89Use Up/Down navigation keys to show more re-sults.Long range mode12iThe long range mode allows measur-ing of difficult targets in unfavorable conditions e.g. bright ambient light or bad target reflectivity. The measuring time is increased. An icon in the status line shows if the function is active.
Leica DISTOTM E7500i 792324 20ENFunctionsInclination tracking1289.3°90°0°3iInclination is permanently displayed. Instrument beeps at 0° and 90°. Ideal for horizontal or vertical adjustments.Sloped objects123Aim laser at upper target point.45Aim laser at lower target point.30.55° 3.506 m 5.944 m6.901 mHorizontal distance between both pointsVertical height between both pointsIncluded angle between both pointsDistance between both points67Use Up/Down navigation keys to show more re-sults.iIndirect distance measuring be-tween 2 points with additional re-sults. Ideal for applications such as length and slope of roof, height of chimneys,…It is important, that the instru-ment is positioned in the same vertical plane as the 2 measured points. The plane is defined of the line between the 2 points.
Leica DISTOTM E7500i 792324 21ENFunctionsHeight tracking12P0PxAim laser at low-er point.34P0PxAim laser at upper points and angle/ height tracking starts automatically.5xyxy6.932 m9.827 mP0Px6= Tracking height if device is turned on tripod7Stops height tracking and displays last measurement.8Use Up/Down navigation keys to show more re-sults.iHeights of buildings or trees without suitable reflective points can be deter-mined. At the bottom point, distance and tilt is measured - which needs a re-flective laser target. The upper point can be targeted with the pointfinder / crosshair and does not need a reflec-tive laser target as only the inclination is measured.
Leica DISTOTM E7500i 792324 22ENFunctionsTrapezium123Aim laser at upper point.45Aim laser at 2nd point.xx22.70°5.907 m78.257 m26Trapezium area7Use Up/Down navigation keys to show more re-sults.
Leica DISTOTM E7500i 792324 23ENFunctionsStake outiTwo different distances (a and b) can be entered to mark off de-fined measured lengths.123abba = b123abba = b121.012 m3Select digit.1.012 m4Adjust digit.5Approve value "a".0.625 m6Adjust value "b".7Approve value "b" and start meas-urement.8Move device slowly along the stake-out line. The distance to the next stake out point is displayed.0.240 m0.625 m0.240 m is missing up to next 0.625 m distance.iWhen approaching a stake out point to less than 0.1 m the instrument starts to beep. The function can be stopped by pressing the CLEAR/OFF button.
Leica DISTOTM E7500i 792324 24ENFunctionsPythagoras (2-point)123Aim laser at first target.45Aim laser at second target.8.294 m67Use Up/Down navigation keys to show more re-sults.iThe result is shown in the main line. Pressing the measuring key for 2 sec in the function ac-tivates automatically Minimum or Maximum measure-ment. We recommend to use the pythagoras only for indirect horizontal measuring. For height measuring (vertical) it is more precise to use a function with the incliantion measuring.
Leica DISTOTM E7500i 792324 25ENFunctionsPythagoras (3-point)123Aim laser at first target.45Aim laser at sec-ond target.67Aim laser at third target.18.294 m89Use Up/Down navigation keys to show more re-sults.iThe result is shown in the main line. Pressing the measuring key for 2 sec in the function activates automatically Minimum or Maximum meas-urement. We recommend to use the pythagoras only for indi-rect horizontal measuring. For height measuring (vertical) it is more precise to use a function with inclination measurement.
Leica DISTOTM E7500i 792324 26ENTechnical Data* applies for 100 % target reflectivity (white painted wall), low background illumination, 25 ºC** applies for 10 to 100 % target reflectivity, high background illumination, - 10 ºC to + 50 ºC*** Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m, to 0.20 mm/m between 30 m to 100 m and to 0.30 mm/m for distances above 100 m**** applies for 100 % target reflectivity, background illumi-nation of approximately 30'000 lux***** after user calibration. Additional angle related devia-tion of +/- 0.01° per degree up to +/-45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by +/-0.1°.For accurate indirect results, the use of a tripod is recommended. For accurate tilt measurements a transverse tilt should be avoided. Distance measurementTypical Measuring Tolerance* ± 1.0 mm / ~1/16" ***Maximum Measuring Tolerance**± 2.0 mm / 0.08 in ***Typical Range* 200 m / 660 ftRange at unfavourable condition ****80 m / 260 ftSmallest unit displayed 0.1 mm / 1/32 inPower Range Technology™yesØ laser pointat distances6 /30 / 60 mm(10 / 50 / 100 m)Tilt measurementMeasuring tolerance to laser beam*****± 0.2°Measuring tolerance to housing*****± 0.2°Range 360°GeneralLaser class 2Laser type 635 nm, < 1 mWProtection class IP65 (dust tight and jet water protected)Autom. laser switch off after 90 sAutom. power switch-off after 180 sBluethooth® Smart Bluethooth v4.0Battery durability (2 x AA) up to 5000 measure-mentsDimension (H x D x W) 143 x 58 x 29 mm5.6 x 2.28 x 1.14 inWeight (with batteries) 198 g / 6.37 ozTemperature range:-Storage-Operation-25 to 70 °C-13 to 158 °F-10 to 50 °C14 to 122 °FiFunctionsDistance measuring yesMin/Max measuring yesPermanent measuring yesStake-out yesAddition/Subtraction yesArea yesTriangle area yesVolume yesTrapezium yesPainter function (area with partial measurem.)yesPythagoras 2-point, 3-pointSmart Horizontal Mode / Indirect heightyesHeight-profile measurement yesInclination tracking yesSloped objects yesHeight tracking yesMemory 30 displaysBeep yesIlluminated colour display yesMultifunctional endpiece yesPointfinder (Viewscreen) 4xZoomDigital Level yesBluetooth® Smart yesPersonalized Favorites yesTimer yesLong Range Mode yesCalculator yes
Leica DISTOTM E7500i 792324 27ENMessage CodesIf the message Error does not disappear after switching on the device repeatedly, contact the dealer.If the message InFo appears with a number, press the Clear button and observe the following instructions:Care•Clean the device with a damp, soft cloth.•Never immerse the device in water.•Never use aggressive cleaning agents or solvents.WarrantyLifetime Manufacturer's WarrantyWarranty coverage for the entire usage time of the product according to Leica Geosys-tems International Limited Warranty. Free of charge repair or replacement for all products that suffer defects as a result of faults in mate-rials or manufacturing, for the entire life of the product.3 Years no CostGuaranteed service should the product become defective and require servicing under normal conditions of use, as described in the user manual, at no additional charge.To receive the "3 years no cost" period, the product must be registered at www.leica-geosystems.com/registration within 8 weeks of the purchase date. If the product is not registered, a "2 years no cost" period applies. Safety InstructionsThe person responsible for the instrument must ensure that all users understand these directions and adhere to them.Areas of responsibilityResponsibilities of the manufacturer of the original equipment: Leica Geosystems AGHeinrich-Wild-StrasseCH-9435 HeerbruggInternet: www.disto.comThe company above is responsible for supplying the product, including the User Manual in a completely safe condition.The company above is not responsible for third party accessories.Responsibilities of the person in charge of the instrument:•To understand the safety instructions on the product and the instructions in the User Manual.•To be familiar with local safety regulations relating to accident prevention.•Always prevent access to the product by unauthorised personnel.No. Cause Correction156 Transverse tilt greater than 10°Hold the instrument without any transverse tilt.162 Calibration mistake Make sure, the device is placed on a absolutely horizontal and flat surface. Repeat the calibration procedure. If the mistake still occurs, contact your dealer.204 Calculation error Perform measurement again.240 Data transfer error Repeat procedure.252 Temperature too high Let device cool down.253 Temperature too low Warm device up.255 Received signal too weak, measuring time too longChange target surface (e.g. white paper).256 Received signal too highChange target surface (e.g. white paper).257 Too much back-ground lightShadow target area.258 Measurement outside of measuring rangeCorrect range.260 Laser beam inter-ruptedRepeat measurement.
Leica DISTOTM E7500i 792324 28ENSafety InstructionsPermitted use•Measuring distances•Tilt measurement•Data transfer with Bluetooth®Prohibited use•Using the product without instruction•Using outside the stated limits•Deactivation of safety systems and removal of explanatory and hazard labels•Opening of the equipment by using tools (screwdrivers, etc.)•Carrying out modification or conversion of the product•Use of accessories from other manufac-turers without express approval•Deliberate dazzling of third parties; also in the dark•Inadequate safeguards at the surveying site (e.g. when measuring on roads, construc-tion sites, etc.)•Deliberate or irresponsible behaviour on scaffolding, when using ladders, when measuring near machines which are running or near parts of machines or instal-lations which are unprotected•Aiming directly in the sunHazards in useWARNINGWatch out for erroneous measurements if the instrument is defective or if it has been dropped or has been misused or modified. Carry out periodic test measurements.Particularly after the instrument has been subject to abnormal use, and before, during and after important measurements.CAUTIONNever attempt to repair the product your-self. In case of damage, contact a local dealer.WARNINGChanges or modifications not expressly approved could void the user’s authority to operate the equipment.Limits of useRefer to section "Technical data".The device is designed for use in areas permanently habitable by humans. Do not use the product in explosion hazardous areas or in aggressive environments.DisposalCAUTIONFlat batteries must not be disposed of with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations.The product must not be disposed with household waste.Dispose of the product appropriately in accordance with the national regu-lations in force in your country.Adhere to the national and country specific regulations.Product specific treatment and waste management can be downloaded from our homepage.Electromagnetic Compatibility (EMC)WARNINGThe device conforms to the most stringent requirements of the relevant standards and regulations.Yet, the possibility of causing interference in other devices cannot be totally excluded.i
Leica DISTOTM E7500i 792324 29ENSafety InstructionsFCC statement (applicable in U.S.)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interfer-ence will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Use of the product with Blue-tooth®WARNINGElectromagnetic radiation can cause distur-bances in other equipment, in installations (e.g. medical ones such as pacemakers or hearing aids) and in aircraft. It can also affect humans and animals.Precautions:Athough this product conforms to the most stringent standards and regulations, the possibility of harm to people and animals cannot totally excluded. •Do not use the product near petrol stations, chemical plants, in areas with a potentially explosive atmosphere and where blasting takes place.•Do not use the product near medical equipment.•Do not use the product in airplanes.•Do not use the product near your body for extended periods.Laser classificationThe device produces visible laser beams, which are emitted from the instrument:It is a Class 2 laser product in accordance with:•IEC60825-1 : 2007 „Radiation safety of laser products“Laser Class 2 products:Do not stare into the laser beam or direct it towards other people unnecessarily. Eye protection is normally afforded by aversion responses including the blink reflex.WARNINGLooking directly into the beam with optical aids (e.g. binoculars, telescopes) can be hazardous.CAUTIONLooking into the laser beam may be hazardous to the eyes.
Leica DISTOTM E7500i 792324 30ENSafety InstructionsLabellingSubject to change (drawings, descriptions and technical data) without prior notice.Laser Radiation Do not stare into the beam Laser class 2 acc. IEC 60825-1:2007 Maximum radiant power: <1mW Emitted wavelength: 620-690nm Beam divergence: 0.16 x 0.6 mrad Impulse duration: 0.2 x 10-9s - 0.8 x 10-9s
Leica Geosystems AGCH-9435 Heerbrugg(Switzerland)www.disto.comLeica Geosystems AG, Heerbrugg, Switzerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Systems (ISO standard 9001) and Environ-mental Management Systems (ISO standard 14001).Total Quality Management - Our commitment to total customer satisfaction. Ask your local Leica Geosystems agent for more information about our TQM program.Copyright Leica Geosystems AG, Heerbrugg, Switzerland 2012Original text (792324 EN)Pat. No.: WO 9427164, WO 9818019, WO 0244754, WO 0216964,US 5949531, EP 1195617, US 7030969, US 8279421 B2, Patents pending

Navigation menu