Leica Geosystems CPD MTD0506 Handheld Laser Distance Meter User Manual SafetyM Umschlg aussen

Leica Geosystems AG, CPD Handheld Laser Distance Meter SafetyM Umschlg aussen

Contents

safety instructions

1
Leica DISTO™ 743363b gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
Safety Instructions
English
The User Manual in a separate brochure, forms a part
of the Safety Instructions.
Carefully read the Safety Instruc-
tions and the User Manual before
using this product.
The person responsible for the instrument must
ensure that all users understand these directions and
adhere to them.
Symbols used
The symbols used in the Safety Instructions have the
following meanings:
WARNING:
Indicates a potentially hazardous situation or
an unintended use which, if not avoided, will result in
death or serious injury.
CAUTION:
Indicates a potentially hazardous situation or
an unintended use which, if not avoided, may result
in minor injury and/or in appreciable material, finan-
cial and environmental damage.
)Important paragraphs which must be adhered
to in practice as they enabled the product to be used
in a technically correct and efficient manner.
Use of the instrument
Permitted use
Measuring distances
Computing functions, e. g. areas and volumes
Storing measurements (BLUETOOTH®)
Prohibited use
Using the instrument without instruction
Using outside the stated limits
Deactivation of safety systems and removal of
explanatory and hazard labels
Opening of the equipment by using tools (screw-
drivers, etc.), as far as not specifically permitted
for certain cases
Carrying out modification or conversion of the
product
Use after misappropriation
Use of accessories from other manufacturers
without the express approval of Leica Geosys-
tems.
Deliberate or irresponsible behaviour on scaf-
folding, when using ladders, when measuring
near machines which are running, or near parts of
machines or installations which are unprotected
Aiming directly into the sun
Deliberate dazzling of third parties; also in the
dark
Inadequate safeguards at the surveying site (e.g.
when measuring on roads, construction sites,
etc.)
2Leica DISTO™ 743363b gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
Limits of use
)See section “Technical Data“.
The Leica DISTO™ is designed for use in areas perma-
nently habitable by humans, do not use the product
in explosion hazardous areas or in aggressive envi-
ronments.
Areas of responsibility
Responsibilities of the manufacturer of the original
equipment Leica Geosystems AG, CH-9435 Heerbrugg
(for short Leica Geosystems):
Leica Geosystems is responsible for supplying the
product, including the User Manual and original
accessories, in a completely safe condition. (addi-
tional language versions can be found at:
www.disto.com.
Responsibilities of the manufacturer of non-
Leica accessories:
)The manufacturers of non-Leica accessories
for the Leica DISTO™ are responsible for developing,
implementing and communicating safety concepts for
their products. They are also responsible for the
effectiviness of these safety concepts in combination
with the Leica Geosystems equipment.
Responsibilities of the person in charge of the
instrument:
WARNING
The person responsible for the instrument
must ensure that the equipment is used in accor-
dance with the instructions. This person is also
accountable for the deployment of personnel and for
their training and for the safety of the equipment
when in use.
The person in charge of the instrument has the
following duties:
To understand the safety instructions on the
product and the instructions in the User Manual.
To be familiar with local safety regulations
relating to accident prevention.
To inform Leica Geosystems immediately if the
equipment becomes unsafe.
Hazards in use
CAUTION:
Watch out for erroneous distance measure-
ments if the instrument is defective or if it has been
dropped or has been misused or modified.
Precautions:
Carry out periodic test measurements. Particularly
after the instrument has been subject to abnormal
use, and before, during and after important measure-
ments.
Make sure the Leica DISTO™ optics is kept clean and
that there is no mechanical damage to the bumpers.
3
Leica DISTO™ 743363b gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
CAUTION:
In using the instrument for distance measure-
ments or for positioning moving objects (e.g. cranes,
building equipment, platforms, etc.) unforeseen
events may cause erroneous measurements.
Precautions:
Only use this product as a measuring sensor, not as
a control device. Your system must be configured and
operated in such a way, that in case of an erroneous
measurement, malfunction of the device or power
failure due to installed safety measures (e.g. safety
limit switch), it is assured that no damage will occur.
WARNING:
Flat batteries must not be disposed of with
household waste. Care for the environment and take
them to the collection points provided in accordance
with national or local regulations.
The product must not be disposed of with
household waste.
Dispose of the product appropriately in
accordance with the national regulations in
force in your country.
Always prevent access to the product by
unauthorized personnel.
Product specific treatment and waste
management information can be downloaded from
the Leica Geosystems home page at
http://www.leica-geosystems.com/treatment or
received from your Leica Geosystems dealer.
CAUTION:
Aiming the telescopic viewer directly at the sun
or at the reflected laser beam (reflected off metallic
or mirroring surfaces, prisms...) is hazardous to the
eyes.
Precautions:
Never aim the telescopic viewer directly at the sun or
at highly reflecting surfaces (metallic or mirroring
surfaces, prisms......).
Electromagnetic Compatibility (EMC)
The term "electromagnetic compatibility" is taken to
mean the capability of the product to function
smoothly in an environment where electromagnetic
radiation and electrostatic discharges are present,
and without causing electromagnetic interference to
other equipment.
WARNING:
The Leica DISTO™ conforms to the most strin-
gent requirements of the relevant standards and
regulations. Yet, the possibility of it causing interfer-
ence in other devices cannot be totally excluded.
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
4Leica DISTO™ 743363b gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the user
is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help
WARNING:
Changes or modifications not expressly
approved by Leica Geosystems for compliance could
void the user’s authority to operate the equipment.
Position of the product label see last page!
Use of the product with
BLUETOOTH®:
WARNING:
Electromagnetic radiation can cause distur-
bances in other equipment, in installations (e.g.
medical ones such as pacemakers or hearing aids)
and in aircraft. It can also affect humans and animals.
Precautions:
Athough this product conforms to the most stringent
standards and regulations, Leica Geosystem cannot
totally exclude the possibility of harm to people and
animals.
Do not use the product near petrol stations,
chemical plants, in areas with a potentially explo-
siveatmosphere and where blasting takes place.
Do not use the product near medical equiment.
Do not use the product in airplanes.
Do not use the product near your body for
extended periods.
CAUTION:
Never attempt to repair the product yourself. In
case of damage, contact the local dealership.
Product labelling:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
5
Leica DISTO™ 743363b gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
Laser classification
Integrated distancemeter
The Leica DISTO™ produces a visible laser beam
which emerges from the front of the instrument.
It is a Class 2 laser product in accordance with:
IEC60825-1 : 2001 "Radiation safety of laser
products"
EN60825-1 : 2001 "Radiation safety of laser
products"
It is a Class II laser product in accordance with:
FDA 21CFR Ch.I §1040 : 2004 (US Department of
Health and Human Service, Code of Federal Regu-
lations)
Laser Class 2/ II products:
Do not stare into the laser beam or direct it towards
other people unnecessarily. Eye protection is
normally afforded by aversion responses including
the blink reflex.
WARNING:
Looking directly into the beam with optical aids
(e.g. binoculars, telescopes) can be hazardous.
Precautions:
Do not look directly into the beam with optical aids.
CAUTION:
Looking into the laser beam may be hazardous
to the eyes.
Precautions:
Do not look into the laser beam. Make sure the laser
is aimed above or below eye level. (particularly with
fixed installations, in machines, etc.)
Integrated positioning bracket sensor Leica
DISTO™ A5
The integrated positioning bracket sensor produces
an invisible infrared beam, which does not leak from
the housing under general conditions.
It is a Class 1 laser product in accordance with:
IEC60825-1 : 2001 "Radiation safety of laser
products"
EN60825-1 : 2001 "Radiation safety of laser
products"
Class 1 / I laser products
Class 1 laser products are defined as safe in normal
operations under reasonably foreseeable conditions,
including direct viewing of the laser beam with optics
that could concentrate the laser output into the eye.
IR-LED Laserklasse 1
nach IEC 60825-1:2001
IR-LED Laser class 1
acc. IEC 60825-1:2001
Labelling
Position of the product label see last page!
Laser Radiation
Do not stare into the beam
Laser class 2
acc. IEC 60825-1:2001
Maximum radiant power: <1mW
Emitted wavelength: 620-690nm
Beam divergence: 0.16 x 0.6 mrad
Pulse duration: 1 x 10 -9 s

Navigation menu