Lelux Electronics 660 WIRELESS WATER OVERFLOW SENSOR WITH ALARM User Manual 660 66000 001R English manual

Download:
Mirror Download [FCC.gov]
Document ID	1329607
Application ID	avNMQ1a3nd9gkBpXjBZQXA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	120.61kB (1507649 bits)
Date Submitted	2010-08-19 00:00:00
Date Available	2010-08-19 00:00:00
Creation Date	2010-08-19 12:10:36
Producing Software	Adobe PDF library 7.77
Document Lastmod	2010-08-19 12:10:36
Document Title	660 -66000-001R English manual
Document Creator	Adobe Illustrator CS2

Wireless Water Overflow
Sensor with Alarm
MODEL 660
FEATURES
• Detect water overflow output wireless radio signal and
activates alarm
• Alarm On/Off switch
• 9V battery operation (not included)
• Low power consumption - - - long battery life
2. After select a location, you should test the sensor transmitting
range before mount it permanently, turn local alarm switch to
OFF, turn the CHIME switch to ON of T015S, T016S main unit or
press HOME button of T018S, T068S, after 60 seconds, put
sensor into water to trigger, you will hear the main unit sounds
“DING DONG” chime if signal is received successfully, if not ,
change location is required.
OPERATION
After 60 seconds install 9V battery, the unit will into standby mode,
once water overflow sensor detect location will output wireless radio
signal to trigger auto dialer and LED flash, then sound alarm 45
seconds, you can turn switch select alarm sound on or off.
• Battery low indicator LED
BATTERY LOW INDICATOR
• Wireless RF transmission up to 50～70meter
INSTALLATION
1. Remove the screw from the battery compartment cover. (Fig.1)
Fig.1
2. Install an alkaline 9V battery, now unit enter into standby mode.
3. Replace the battery cover and screw.
4. Learning ID code to main unit.
5. Mount the main unit at the desired location with anchors and
screw (included).
6. Press suctorial cap against of water detect sensor on the desired
location. (Fig.2)
Fig.2
NOTE:
1. The wireless water overflow sensor output RF signal compatible
trigger T015S, T016S, T018S, T068S auto dialer function, must
learn ID code to main unit then use, learn ID operation see main
unit manual.
-1-
size:90X175mm
p/n:610-66000-00XR
white paper print black words
When 9V battery goes lower, the LED will light on 3 seconds and
off 1 second, change a new alkaline 9V battery immediately, to
avoid the sensor might not detection properly.
Warning:
Changes or modifications to this unit not expressly approved by the
party responsible for compliance will void the user's authority to operate
the equipment. Any change to the equipment will void FCC grant.
This equipment has been tested and found to comply with the limits
for a Class C digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
610-66000-001R
-2-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1.1-111
Format                          : application/pdf
Title                           : 660 -66000-001R English manual
Creator Tool                    : Adobe Illustrator CS2
Create Date                     : 2010:08:19 12:10:36+08:00
Modify Date                     : 2010:08:19 12:10:36+08:00
Metadata Date                   : 2010:08:19 12:10:36+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 252
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 20748 bytes, use -b option to extract)
Document ID                     : uuid:1AFAB1D63BABDF11B943AEAA0B3F89D9
Instance ID                     : uuid:d1a04835-208c-45c0-82ca-1ad1b52d920d
Derived From Instance ID        : uuid:19FAB1D63BABDF11B943AEAA0B3F89D9
Derived From Document ID        : uuid:18FAB1D63BABDF11B943AEAA0B3F89D9
Producer                        : Adobe PDF library 7.77
Page Count                      : 1
Container Version               : 9
Creator Version                 : 12
Creator                         : Adobe Illustrator(R) 12.0
For                             : User, -
Bounding Box                    : 121 -10 741 596

EXIF Metadata provided by EXIF.tools