Lenco Dc 511 Operating Instructions ENG
DC-511 - Operating Instructions DC-511_GB Free User Guide for Lenco Camera, Manual
2015-08-19
: Lenco Lenco-Dc-511-Operating-Instructions-788649 lenco-dc-511-operating-instructions-788649 lenco pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
4. Details for camera setting DC-511 Manual capture Mode For information and support, www.lenco.eu 1. Get to know your camera 5.0 Mega pixels resolution sensor Digital still camera Digital video camcorder Built-in flash Light 8x digital zoom 2.4" TFT color display Micro SD card support 2xAAA alkaline batteries Smile detection Anti-shaking still capture Resolution Quality Sharpness Item 1 Function Mode selected 2 Flash indicator White balance Photo playback mode. Video playback mode. Force flash: The flash is on in any environment. Auto flash: The camera determines if the flash should be used or not. Lens 6 Flash light 7 Macro switch 8 9 10 11 LCD screen Mode Menu Up 12 Right/Flash light Hook for attaching the wrist strap to the camera. When the indicator is blinking,the camera is busy Note: Keep the lens clean. Dirt and fingerprints will affect the quality of the picture. Use the built-in flash to give the subject extra lighting if it is in dark surrounding the best flash distance is recommended within 1.5m). （ Macro mode: Select this mode to take close-up photographs (distance 11cm - 18cm). Normal mode: Select this mode to take photographs from 0.5m - infinity. Press it to select PHOTO/VIDEO mode. Press it to enter camera setting mode. Up & Digital zoom in. For RIGHT selection in menu mode. For flash light function selection in photo mode. 13 Down Down & Digital zoom out. 14 Delete Press it to delete the photos/videos in playback mode. 15 Playback 16 Enter 17 Left / EV± Press it to enter playback mode. To start /stop recording a video clip in playback mode, or to confirm changes in menu mode. For LEFTselection in menu mode. For exposure value set up in photo/video mode. 18 Tripod connector To fix the camera on tripod (not included). 19 USB interface 20 Micro SD card slot 21 Battery door Via this connection, you can connect to a computer. SD card storage location. Door for battery. 3. Explanation of the status icons ISO 5 Photo/Video counter Light Sensitivity select. Photo mode: No. of pictures had been taken. Video mode: Recording time in second. Playback mode: No. of pictures or video file. 6 Selected resolution Cloudy Auto/Landscape/ Backlight/Night scene/Portrait/Sports Auto/50/100/200 Sensitivity select On / Off Smile detection setting On / Off Anti-shaking setting Resolution VGA 640 x 480 QVGA 320 x 240 Video resolution set up 12M = 4032x3024; 8M = 3264x 2448 5M = 2560x1920; 3M = 2048x1536; Date/Time YY/MM/DD Date or time setting 1.3M = 1280x960; Auto power off Off / 1Minute / 3 Minutes Auto power off selection Beep sound Off/On Beep sound setting Select display language Date stamp English/T-Chinese/ S-Chinese/French/ Deutsch/Italian/Spanish/ Portuguese/Japanese Date &Time /Date /Off Frequency 50Hz / 60Hz VGA = 640x480 Super fine. 7 Picture quality Fine. Normal. 8 Micro SD card indication Setup 5 2 Press this button to take photographs / start filming. Press this button to turn on, press again to turn off. 4 ISO Smile detection Anti-shaking Video 3 4 Shutter Power on/off button Strap hook Busy indicator 10s Timer Picture quality setting Sharpness setting Automatic white balance White balance selected for daylight surrounding White balance selected for cloudy surrounding White balance selected for tungsten lighting White balance selected for fluorescent surrounding Scene setting Tungsten Scene SET 1 Self-timer Super Fine/Fine/Normal Strong/Normal/Soft Auto Fluorescent No flash : The flash is turned off. 3 Single or 10s timer selection 4032 x 3024 3264x 2448 2560 x 1920 2048 x 1536 1280 x 960 640 x 480 Daylight Still 2. Functional parts Description Photographs mode. Videos capture mode. Single / 10s Timer 12M pixel resolution 8.0M pixel resolution 5.0M pixel resolution 3.0M pixel resolution 1.3M pixel resolution VGA resolution The Micro SD card is inserted and will be used as storage for PHOTO and VIDEO Language 9 Brightness alert Alert user to hold the camera steadily. 10 Normal/Macro mode indicator Mode (0.5m – infinity). Macro mode (11cm – 18cm). 11 Battery indicator 12 Exposure value Show EV value. 5.1 Installing the batteries 13 White Balance White balance selection. 14 Scene mode Landscape/Backlight/Night scene/Portrait/Sports 1. 2. 3. 15 Smile detection 16 Zoom indicator Format Default setting Version The batteries are full. Internal Memory/ SD card Cancel / OK Note: The camera will remain the last setting when it is turned off. The batteries are empty. ± On/off Showing zoom ratio. Date stamp Select power frequency in your location Format the memory location selection (all data will be lost). Default setting See the firmware version 5. Using the camera Open the battery door. Insert 2xAAA alkaline batteries into the camera. Close the battery door. The photo will be taken after the timer reaches the delay time of 10s and the camera will beep during the delay time. 8. 5.2 Inserting a memory card (not included) Follow the instructions given below to insert the optional micro SD memory card into the camera. 1. Turn off the camera first. 2. Open the card bar. 3. Insert the micro SD card into the camera. Note: There is only one right direction to insert the micro SD memory card into the slot. Do not force the card into the slot, or else it may damage both the camera and the micro SD memory card. Note: The micro SD memory card must be formatted before taking photographs. See the following sections for more information. 5.8 1. 2. Press the MODE button to select the video clip mode( ). For setting the resolution, Press MENU button and select Resolution, then press the ENTER button to confirm. Two resolution will be displayed. VGA (640 x 480) QVGA( 320 x 240). Press the SHUTTER button to start recording video, press the SHUTTER button again to stop recording. The video clip will now be saved as an AVI file in the camera memory. 3. 5.9 1. 2. 3. 4. 5. 6. Recording video clips Playback photographs Press the( ) button to get into playback mode. Press the left or right buttons to see photographs. In full screen display , press the up button to zoom in the photo. To view images in thumbnail, press down button. To shift the image in zoom-in mode, press the ENTER button then use the up/down/left/right buttons. Press the MENU button, select SLIDE SHOW, and then press the ENTER button to confirm. The pictures saved in your camera or your micro SD card will be displayed in sequence automatically. 8. System requirement Operating system CPU RAM Interface CD Windows XP / Vista or above Mac 9.x or X.x Pentium III or above At least 64MB USB port 4x speed CD ROM or above 9. Troubleshooting Problem Cause Solution Low battery power. Battery placed at wrong polarities. Replace or install the battery correctly. Photos can not be saved when taking pictures. The memory card or built-in memory hasn’t been formatted properly. Format the memory in setup mode of the camera. Please refer to section 5.3. Cannot find removable disk after connecting the camera to the computer. Connection failure. Make sure all cable connections are secured and restart the computer if necessary. Flash does not work. Battery power is too low. Replace with new 2xAAA alkaline batteries. The batteries used up very fast. Incorrect or old, used up, battery Replace with new 2xAAA alkaline batteries. The photos are blurry 1. The camera is not held steadily 2. The lens of camera is dirty. 1. Hold the camera steadily until it beeps when taking video photo. 2. Clean the lens with soft dry cloth. Cannot turn on the camera 5.10 Playback video clips 5.3 Formatting the memory or micro SD card 1. 2. 3. 4. Press the menu button ( ) in PHOTO or VIDEO mode. Select the setup mode by press the right button. Select the format icon by press the ( ) button and press the ENTER button ( confirm. Select Internal memory / SD card then press the ENTER button. 1. ) to 5.4 Setting the resolution The camera can be set to different resolutions. 1. Press ( ) button in PHOTO mode, select the resolutions icon by( ) key and press the ENTER button ( ) to confirm. Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536), 5M (2560 x 1920), 8M (3264x 2448), 12M (4032 x 3024) 2. Six different resolutions will be displayed. Select the desired resolution by using the up or down buttons and press the ENTER button to confirm the selection. 5.5 1. 2. Taking photographs Turn on the camera. Depending on the distance to the object being photographed, use macro switch to adjust the distance. Select the flower symbol ( ) if you wish to take a close-up photograph (11cm –18cm). If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the macro switch to normal mode ( ). If you are not sure if there is enough lighting, turn the automatic flash( ) on by pressing the flash button. (If the battery power is too low, the flash won’t be activated). 4. Use the LCD screen to aim the object you wish to take photograph. Use the face detection to aim the people you wish to take photograph. 5. Press SHUTTER button and wait until the LCD display turn on again. 6. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is detected Caution: 1) Taking picture for fast-moving object is not recommended. 2) Image may be distorted when taking picture in a moving vehicle. 3. 5.6 Zoom in and out The camera can zoom in up to 8 times. Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the maximum zoom ratio. 5.7 Self-timer setting You can use the self-timer function when you wish to take a photograph for yourself or when you wish to take a photograph for an object which the camera must be as still as possible. 1. Set the camera to photo mode. 2. Press the MENU button ( ). The menu will appear. 3. Press the down button to select Capture Mode and confirm by pressing the ENTER button. 4. Press the down button to set the delay time: 10S Timer. 5. Press the ENTER button to confirm. The self-timer function is now ready for use. 6. Aim at the object you wish to take photo. 7. Press the SHUTTER button to take a photograph. 2. 3. 4. When video clips are displayed, press the ENTER button to start playing the video and press the ENTER button again to pause the playback. press right button to fast forward or press left button to rewind. Press the down button to stop. Press the( ) button again to exit. 5.11 Delete photographs and video clips You can choose to delete a single photograph / video clip, or delete all the photographs / video clips in the memory. Follow the instructions given below to delete photograph. 1. Press the ( ) button to enter the playback mode. 2. Press left or right button to select photograph/video clip to be delete. and select Delete This Image/All .. 3. Press the delete button 4. Press the ENTER button ,then select OK to confirm. 5. Press the ( ) button to exit. NOTE: Select “All” and Press the ENTER button to confirm, all the pictures and videos will be deleted. （ ） List of accessories: Camera 1x User manual 1x Handstrap 1x 6. Connecting to a PC The unit can be connected to the computer as mass storage device and transfer photo/video files for storage. 7. Specifications Sensor Image resolution Lens Focus range Macro mode Digital zoom Flash strobe LCD display White balance 5.0 Mega pixel CMOS sensor 12.0 Mega pixels: (4032x3024) 8.0 Mega pixels: (3264x 2448) 5.0 Mega pixels: (2560x1920) 3.0 Mega pixels: (2048x1536) 1.3 Mega pixels: (1280x960) VGA: (640x480) F/2.8 f = 8.5mm 0.5m. ~ Infinity 11cm – 18cm 8x Built-in ( Auto / force / off ) 2.4" TFT color display Auto / Daylight / Cloudy / Fluorescent / Tungsten Video mode 20fps@VGA&30fps@QVGA with micro SD card External memory card File format Self timer PC interface Power source SD card supports up to 8GB Picture: JPEG, Video: AVI 10 seconds USB 2.0 2xAAA alkaline batteries For information and support, www.lenco.eu USB cable 1x Pouch 1x
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 Producer : GPL Ghostscript 8.15 Create Date : 2012:06:19 15:59:20 Modify Date : 2012:06:19 15:59:20 Title : Microsoft Word - DC-511 ENG Creator : PScript5.dll Version 5.2.2 Author : thoubenEXIF Metadata provided by EXIF.tools