Lenovo Mobile Communication Technology A6000L Lenovo Mobile Phone User Manual

Lenovo Mobile Communication Technology Ltd. Lenovo Mobile Phone

User manual

Download: Lenovo Mobile Communication Technology A6000L Lenovo Mobile Phone User Manual
Mirror Download [FCC.gov]Lenovo Mobile Communication Technology A6000L Lenovo Mobile Phone User Manual
Document ID2512358
Application IDcIdsdmENTR/Lf6QS7i3J3Q==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize98.14kB (1226688 bits)
Date Submitted2015-01-23 00:00:00
Date Available2015-07-22 00:00:00
Creation Date2014-11-11 11:22:29
Producing SoftwareAdobe PDF library 10.01
Document Lastmod2015-01-22 16:26:00
Document TitleLenovo A6000 QSG EN Rechargeable battery 20141110-FCC
Document CreatorAdobe Illustrator CS6 (Windows)

Lenovo A6000-l
Quick Start Guide v1.0
Read this guide carefully before using your smartphone.
Technical specifications
Model and system
Model: Lenovo A6000-l
System: Android
Dimensions and weight
Height: 140.9 mm (5.547 inches) Width: 70.55 mm (2.778 inches)
Depth: 8.2 mm (0.323 inch)
Weight: 129.6 g (0.286 lb)
①
Processor
Processor: Qualcomm MSM8916, Quad Core, 1.2GHz
Camera
Type: CMOS
Pixels: 8.0 megapixels (back) + 2.0 megapixels (front)
Battery
Battery: 2300 mAh
Display
Size: 5.0 inches
Resolution: 1280 × 720 pixels
Screen: multi-touch
LCD type: IPS
Wireless Communication
Bluetooth 4.0; WLAN 802.11 b/g/n; ②LTE, WCDMA, GSM; GPS
① Depending on the measuring method, the dimensions and weight
might vary slightly.
② In some countries, LTE is not supported. To know if your
smartphone works with LTE networks in your country, contact
your carrier.
First glance
Front-facing
camera
4 Home key
Micro USB
connector
10 Speaker
13 Volume buttons
2 Receiver
3 Back key
5 Menu key
6 Rear-facing
camera
Headset
connector
11 Microphone
9 Flashlight
12 On/Off button
Preparing your smartphone
You must insert the SIM card provided by your carrier to use cellular
services. Set up your smartphone as shown.
Step 1. Open the back cover.
SI
Step 2. Insert the SIM card and
the memory card.
SI
Step 3. Install the battery.
a. Align the battery
connectors on the battery
with the pins in the
battery compartment.
b. Push the battery down
into place.
Step 4. Install the back cover.
Always turn off your smartphone first before you insert or remove a
SIM card. Insert or remove a SIM card with your smartphone on may
damage your SIM card or smartphone permanently.
Charging the battery
Charge the battery as shown.
Method 1. Connect your smartphone to a power outlet using the
cable and USB power adapter that come with your
smartphone.
Method 2. Connect your smartphone to a computer using the cable
that comes with your smartphone.
Low battery power
Fully charged
Charging
Turning on or turning off your smartphone
Turn on: Press and hold the On/Off button until
the Lenovo logo appears.
Turn off: Press and hold the On/Off button for a
few seconds, then tap Power off.
Reboot: Press and hold the On/Off button for a
few seconds, then tap Reboot.
Your smartphone has a rechargeable battery. For more information
about battery safety, see the “Rechargeable battery notice” in the
Important Product Information Guide shipped with your smartphone.
FCC statement
FCC statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
SAR information statement
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard
for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with
the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station
antenna, the lower the power output. Before a phone model is
available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the limit established by the
government adopted requirement for safe exposure. The tests
are performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for use at
the ear is 0.35 W/Kg and when worn on the body, as described
in this user guide, is 1.13 W/Kg (Body-worn measurements
differ among phone models, depending upon available
accessories and FCC requirements). The maximum scaled SAR
in hotspot mode is 1.36 W/KG, While there may be differences
between the SAR levels of various phones and at various
positions, they all meet the government requirement for safe
exposure. The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://www.cc.gov/
oet/fccid after searching on.
FCC ID: YCNA6000L Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular Telecommunications
Industry Association (CTIA) web-site at http://ww.wowcom.com.* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
Body-worn operation
This device was tested for typical body-worn operations. To
comply with RF exposure requirements, a minimum separation
distance of 10mm must be maintained between the user’s body
and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that
do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
Learning more
To learn more information about your Lenovo smartphone and
obtain the latest smartphone manuals, go to:
http://support.lenovo.com/.
Getting support
For support on network service and billing, contact your
wireless network operator. For instructions on how to use your
device, go to: http://support.lenovo.com/.
European Union conformity
Radio and Telecommunications Terminal Equipment
Directive
This product is in compliance with the essential requirements
and other relevant provisions of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC.
Legal notices
Lenovo and the Lenovo logo are trademarks of Lenovo in the
United States, other countries, or both.
Other company, product, or service names may be
trademarks or service marks of others.
First Edition (November 2014) © Copyright Lenovo 2014.
Printed in China

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2014:11:11 11:22:29+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2015:01:22 16:26:00+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Lenovo A6000 QSG EN Rechargeable battery 20141110-FCC
Metadata Date                   : 2015:01:22 16:26+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 184
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 12254 bytes, use -b option to extract)
Instance ID                     : uuid:6e578648-40ce-4d19-adca-3e8ced49a577
Document ID                     : xmp.did:93BE58C14469E41188289AAA1108043F
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:031c8356-79aa-4e60-b1e9-866f8d1f643e
Derived From Document ID        : xmp.did:F7A6268EB968E411B18ADA99F849702F
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:2B09D2E15386E211B8309B1002AA9714, xmp.iid:93BE58C14469E41188289AAA1108043F
History When                    : 2013:03:06 19:49:20+08:00, 2014:11:11 11:22:21+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 73.999962
Max Page Size H                 : 109.999660
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldItalicMT, HelveticaNeueLTStd-Lt, HelveticaNeueLTStd-LtIt, LenovoDo-Medium, LenovoDo-Bold, HYb1gj, AdobeSongStd-Light
Font Family                     : Arial, Helvetica Neue LT Std, Helvetica Neue LT Std, Lenovo Do, Lenovo Do, 汉仪中黑简, Adobe 宋体 Std
Font Face                       : Bold Italic, 45 Light, 46 Light Italic, Medium, Bold, Regular, L
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type
Font Version                    : Version 2.90, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.004;Core 1.0.33;makeotf.lib1.4.1585, Version 001.000, Version 001.000, Version 3.53, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : ARIALBI.TTF, HelveticaNeueLTStd-Lt.otf, HelveticaNeueLTStd-LtIt.otf, LENOVOMD.otf, LENOVOBD.otf, hyb1gjm(汉仪中黑简).ttf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 424 C, PANTONE 484 C, PANTONE 485 C
Swatch Groups Colorants L       : 60.000000
Swatch Groups Colorants A       : 53
Swatch Groups Colorants B       : 21
Swatch Groups Colorants Red     : 137
Swatch Groups Colorants Green   : 211
Swatch Groups Colorants Blue    : 0
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 9
For                             : mouyuanyuan,
Bounding Box                    : -607 -1536 1775 149
Container Version               : 11
Creator Version                 : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YCNA6000L

Navigation menu