Lenovo Ideacentre A7 Series Quick Reference V1.0 User Manual Idea Centre A700 All In One (ideacentre)
2010-06-07
User Manual: Lenovo Lenovo Ideacentre A7 Series Quick Reference V1.0 Lenovo IdeaCentre A7 Series Quick Reference V1.0 A700 All-in-One (ideacentre) A700 All-in-One (ideacentre)
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Version: 1.0 31043566 Before using the accompanied peripherals, carefully read the detailed information in the Safety and Warranty Guide. Since different models have different peripherals, you might not find all of the described items depending on the actual model you purchased. Note: The remote control cannot turn the computer on. When using the computer for the first time, you need to establish a connection from the wireless keyboard and mouse to the computer. See section Wireless keyboard and mouse instructions on this flyer for more details. 1 Card reader 2 IEEE 1394 port 3 Headphone port 4 Microphone port 5 USB ports (2) 1 6 Optical drive slot 2 Computer stand instruction Use the stand to position the display to your preference. It can be rotated between 12º and 35º from the vertical position. The stand provides stability to the computer; it is not a removable part. 35˚ Attention: 1. The computer stand must remain installed at all times to ensure maximum system stability. 2. Make sure the angle of the computer is at least 12 degrees from the vertical positon; otherwise the computer will be unstable and could fall over. The computer can be mounted on the wall. To mount the computer on the wall, you need to install a wall mount VESA bracket adapter* ( some models are shipped with this part) on the back of the computer as following steps. Using this bracket adapter to install a VESA standard wall mount (purchased separately) to make the computer mounted on the wall. Note: For this procedure, it helps to place the computer face-down on a soft flat surface. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the screen surface from scratches or other damage. VESA bracket adapter*: VESA100, 100mm x 100mm, M4 bolts. 1 3 4 Wireless keyboard and mouse instructions 2 3 Method A 1. Install the batteries. Close Put 2 AA batteries in the keyboard's battery compartment. 2 AA batteries Battery compartment 2. Turn on the power switch. Turn on the mouse power switch. After installing the batteries, turn on the power switch on the side of the keyboard. 3. Press the wireless connect button. TATE OFF S While the computer is turned off, press the wireless connect buttons on the back of the keyboard and mouse. 6 5 4. Make sure the indicator lights blink and then turn on the computer. Connect the power adapter to the computer and the electrical outlet as shown above. 1. Pull the computer stand up and slide the little pin up in the hinge to fix the stand. 2. Remove the 2 screws that secure the stand to the computer rear cover. 3. Install the metal bracket on to the computer. When the keyboard and mouse wireless indicator lights blink white, turn the computer on within 30 seconds to establish a wireless connection. Computer instruction 5. Establish the wireless connection automatically. 1 2 Press the power button on the side of the computer to turn it on. 3 4 5 6 7 Built-in microphone 8 Camera 9 Power button 10 Hard Disk Drive Indicator 11 Bluetooth status indicator 12 WIFI status indicator 13 Indicator lights ON/OFF button 1 14 Volume down Volume up Once the wireless connection is successfully established, the indicator lights on the keyboard and mouse will turn off and they will work properly. Brightness down Brightness up Novo Vision button PC mode / HDMI-in / AV-in switch combo If the wireless keyboard and mouse fail to connect according to method A, follow method B: LCD On/Off Method 2 Important information on how to use this computer 1 Hold the computer tightly when you carry it. 2 3 1 2 3 4 3 5 6 7 8 5 6 7 8 B If you do not plan to use the mouse for a long time, turn off the mouse power switch to save battery life. Notes: 1) When establishing a wireless connection, it is recommended to keep the distance from the keyboard/mouse to the computer less than 25 cm (10 inches) 2) The effective working distance of the wireless keyboard and mouse is 10 m (33 feet) (depending on the computer's working environment). If the wireless device does not work, do the following: 1. Be sure there is no physical obstacle between the wireless device and the computer. 2. Restart the computer, and verify that the system devices are functional. 3. Repeat the procedure for establishing a Bluetooth connection. 4. Replace the batteries. 5. Do not place the computer under a metal surface or table. 6. Make sure there are no electronic devices close by, such as speakers, remote controls of electronic toys or mobiles, which might create high electromagnetic fields that could interrupt the wireless connection. 7. Place the keyboard, mouse and remote control the right way up. 8. Remove the batteries from the keyboard, mouse and remote control if you do not plan to use them for a long time. 9. If the batteries in the keyboard, mouse or remote control leak, clean the battery compartments as soon as possible and insert new batteries. 10. Use batteries of good quality to ensure the proper functioning of the remote control. 11. When battery power becomes low, the battery indicator light on the keyboard will change from orange to red. 1. Make sure the indicator lights blink. The buttons at the bottom of the screen are touch buttons. When you touch these, the indicator lights turn on. 4 Put 2 AA batteries in the battery compartment, making sure the position of the polarities is identical to the image. 9 10 11 12 13 14 9 4 5 6 7 8 9 TV tuner port (selected models) Wireless reset button AV-IN ports USB ports (4) Ethernet port SPDIF port Make sure the wireless indicator lights still blink. If they stop blinking, press the connect button on the back of keyboard and mouse again. 2. Press the wireless reset button until wireless connection established. To establish the wireless connection, press the wireless reset button on the back of the computer for over 6 seconds until the indicator lights of the keyboard and mouse turned off. HDMI in port HDMI out port Power socket When the battery indicator light blinks red, it means that the battery power becomes low. If connection is not established successfully, refer to "Wireless keyboard and mouse instructions" in the User Guide. When the battery indicator light blinks white, it means that the keyboard or mouse is being connected. LVT LVT : After entering Windows, press this key to launch the LVT (Lenovo Vantage Technology) program, Lenovo's pre-loaded Home PC software. In addition to its own functions, the LVT program will allow you to start other Windows compatible software, specially configured to run on this model of computer. Bluetooth configuration Install the batteries as indicated below. 1 Pull the lid of the battery compartment on the back of the remote control. 2 Important information on how to use the remote control Air mouse In addition to the functions of a normal remote control, the air mouse can also be used as a regular mouse. 7 The air mouse buttons are: Left air mouse button, Air mouse On/Off button, Right air mouse button. When the Bluetooth indicator light blinks twice every second and at the same time the remote control makes a beep sound, it means that the remote control is waiting for Bluetooth connection and the steps to add Bluetooth devices to the OS can be started. Insert the batteries and close the lid of the battery compartment. Note: Use good batteries and place them correctly in order to avoid malfunction or possible damage of the remote control. 3 The remote control is now ready to be configured by executing the following steps below. When the air mouse On/Off button is on, it is ready for use. Hold the air mouse horizontally. Do not use the air mouse in a slanted or vertical position. Doing so might result in the pointer moving into another direction other than the intended one. Select the Lenovo_RC icon from the Add a device dialog box and click Next. Select Enter the device's pairing code and enter the password 0000. Once the Bluetooth connection has been completed successfully, the Bluetooth indicator light will turn on and the remote control can now work properly. Headphone LED indicator of Bluetooth 9 To open the Devices and Printers dialog box, go to Windows and click Start -> Control Panel -> Hardware and Sound. 5 Press Add a device and pop-up a dialog box. The procedure to establish connection as described in the steps below needs to be finished within 180 seconds. Failing to do so will require you to repeat the steps until the connection has been completed successfully. 6 Press Play and digit 1 at the same time for about 10 seconds. Record Rewind Fast forward Play or pause Skip Replay Once the Bluetooth connection has been completed successfully, the Bluetooth LED indicator becomes solid and the remote control can be used. Do not press Play and digit 1 again after having completed successfully the Bluetooth connection. Doing so will restart the pairing process. Bluetooth audio configuration. 1. In the Add Wireless Device dialog box, right click on Lenovo_RC device and select Properties in the menu. 2. Check the Headset box under the Services tab in the Properties dialog box. Click OK. 3. Right-click on Lenovo_RC device and select Control in the menu. 4. Under the Device Operations tab, if the computer is not connected to your Bluetooth headset(Lenovo_RC), click on Connect to establish the Bluetooth connection. Windows Media Center Start Back More Direction OK Air mouse ON/OFF Left air mouse/Game A Volume up/Game X A B X Y Right air mouse/Game B Channel Up/Game Y Mute Channel down/Game throttle down Guide Volume down/Game throttle up * key Clear To start the games ABC DEF GHI JKL MNO PQRS TUV WXYZ ƿ Digit/Input sources # key Enter Turn on / off / switch to games Turn on / off the air mouse Too close to the computer. 0 -1 meter (0 - 3 feet) Suggested range: 1 - 3 meters (3 -10 feet) Too far from the computer. Over 3 meters (over 10 feet) The optimum distance between the remote control and computer is 1 - 3 meters (3 -10 feet). @ 30 The best angle to use the remote control is within 30°. Make sure there are no physical obstacles between the remote control and the computer that could block the Bluetooth connection. Turn on / off the telephone Note: Bluetooth LED solid: Indicates a normal Bluetooth connection to the computer. Otherwise, this indicates disconnection or that the remote control is in sleep mode. Turn on the Windows Media Center M LED solid: Indicates that the CD game is active and can be manipulated by the remote control. Notes: When the Games mode and Windows Media Center are both turned on at the same time,the direction and OK buttons only work for games and do not work for Windows Media Center. For joystick games, the Volume Up/Down buttons as well as the Channel Up/Down buttons function as Game X/Y and Game throttle up/down buttons. You cannot use them to adjust volume or to switch channels. 3D LED solid: Indicates that the joystick game is active and can be manipulated by the remote control. Game switch button: Used to switch among the 3 different game modes - CD game, joystick game, or to turn off the game. Press the button once to switch to another mode. The remote control is the standard MCE remote control for the model configured with Windows MCE. The Telephone and Air mouse buttons need to be pressed for more than 1 second to turn these functions on. Additional software needs to be installed in order to use the telephone. Note: When using the remote control, make sure the front side faces up. (Select models only ) When in air mouse and game mode, if the remote control does not move or no button is pressed during 10-20 seconds, the remote control switches to sleep mode. During sleep mode, the Bluetooth connection remains on and the Bluetooth LED will be solid. Move the remote control or press any button to switch back to its previous mode. Microphone When in telephone mode, the remote control will never switch tostandby or sleep mode. Teletext On/Off(Select models only) In any mode other than telephone mode, if there is no operation within 10 minutes after switching to standby mode, the remote control enters sleep mode. As a result, the Bluetooth connection between the computer and the remote control will disconnect and the Bluetooth LED light will turn off. CAUTION OK LED indicator of joystick game LED indicator of CD game Game switch Phone On/Off Stop Power 4 Press the Game button to switch to the CD game mode. Press the air mouse On/Off button to switch between the air mouse and the remote control. 8 Make sure the position of the polarities of the batteries is identical to the image. Remove all batteries when you do not use them for a long time to avoid possible leakage. Use reliable good quality alkaline battteries. You can use the remote control in the following directions according to your games: OK When the M indicator light is on, it means that the CD game mode has been switched on. When using the remote control, make sure the remote control's wrist strap is adjusted tightly around your wrist to avoid hitting people or objects around you. Insert the Game CD in the optical drive and follow the prompts to start the games. Use the remote control to install and play the games. For more information about the games, check out Access Help on the Game CD. CAUTION Do not throw the remote control at will to avoid hitting someone or damaging something. CAUTION Do not use the remote control when your hand or the remote is wet. You might receive an electrical shock and damage the remote control. CAUTION Do not swirl the remote control by the wrist strap to avoid hitting someone or damaging something. CAUTION Be aware of the people and the objects around you when you use the remote control. CAUTION Keep a safe distance from all the objects and people within your reach. Pay attention to the lighting devices over your head to avoid damaging the remote control. Press any button to wake up the remote control. However, wait for a moment to restore the Bluetooth connection. No pairing is needed when it is woken up from standby mode or sleep mode. When the computer goes into standby mode (S3), sleep mode (S4) or is turned off (S5), the remote control will go into sleep mode, disconnecting the Bluetooth connection. After waking up or restarting the system, you may press any button on the remote control to renew the Bluetooth connection. Use the remote control normally to save battery power. When the remote control power indicator blinks every three seconds, this means that the battery power is low and the remote control will turn off automatically after 10 minutes. When the remote control power indicator blinks 3 times per second during 3 seconds and if in telephone mode there are 3 beeps during 3 seconds, this indicates that the remote control cannot be used. You need to replace the batteries to use it again. After replacement of batteries, the indicator light will stop blinking. In Windows MCE mode: MCE remote control works normally. Press the related button to turn on the air mouse, game or wireless telephone function. In Air Mouse mode: MCE remote control and air mouse work normally. Press the related button to turn on the game or wireless telephone function. In Telephone mode: MCE remote control and wireless telephone function work normally. Press the related button to turn on the game or air mouse function. In Game mode: The Game function works normally. Press the related button to turn on the air mouse, MCE remote control or wireless telephone function.wireless telephone function.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24 Instance ID : uuid:7eff52d6-adb0-9d4b-880e-ecf92024a1a8 Document ID : adobe:docid:indd:b3e1f896-31d9-11df-be1f-928cdef0af8a Rendition Class : proof:pdf Manifest Link Form : ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches Manifest Reference Instance ID : uuid:D895355B034ADF118900E51ADEA0B04F, uuid:D495355B034ADF118900E51ADEA0B04F Manifest Reference Document ID : uuid:D595355B034ADF118900E51ADEA0B04F, uuid:687710BA3F49DF11819A8362D7D584BF Create Date : 2010:04:15 11:04:37+08:00 Modify Date : 2010:04:15 11:05:30+08:00 Metadata Date : 2010:04:15 11:05:30+08:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 18297 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS3 (5.0)EXIF Metadata provided by EXIF.tools