Lenovo P910 Overview User Manual Workstation (Think Station) Type 30B8
1970-01-01
User Manual: Lenovo P910 Overview P910 Workstation (ThinkStation) - Type 30B8 ThinkStation P910 (type 30B8)
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
Product Specifications Reference (PSREF) ThinkStation P910 Platform Specifications Components Chipset System mgmt Processor Specification Intel C612 Platform Controller Hub (PCH) Intel Active Management Technology 9 Up to two 160W Intel Xeon E5-2600 v4 family processors, or up to two Intel Xeon E5-2620 v3 or E5-2609 v3 processors: Components E5-2699 v4 E5-2697A v4 E5-2690 v4 E5-2687W v4 E5-2680 v4 E5-2667 v4 E5-2660 v4 E5-2658 v4 E5-2650 v4 E5-2643 v4 E5-2640 v4 E5-2637 v4 E5-2630 v4 E5-2623 v4 E5-2620 v4 E5-2609 v4 E5-2603 v4 E5-2620 v3 E5-2609 v3 Network interfaces HD Audio TPM 22C/2.2GHz/55MB/145W/DDR4-2400 16C/2.6GHz/40MB/145W/DDR4-2400 14C/2.6GHz/35MB/135W/DDR4-2400 12C/3GHz/30MB/160W/DDR4-2400 14C/2.4GHz/35MB/120W/DDR4-2400 8C/3.2GHz/25MB/135W/DDR4-2400 14C/2GHz/35MB/105W/DDR4-2400 14C/2.3GHz/35MB/105W/DDR4-2400 12C/2.2GHz/30MB/105W/DDR4-2400 6C/3.4GHz/20MB/135W/DDR4-2400 10C/2.4GHz/25MB/90W/DDR4-2133 4C/3.5GHz/15MB/135W/DDR4-2400 10C/2.2GHz/20MB/85W/DDR4-2133 4C/2.6GHz/10MB/85W/DDR4-2133 8C/2.1GHz/20MB/85W/DDR4-2133 8C/1.7GHz/20MB/85W/DDR4-1866 6C/1.7GHz/15MB/85W/DDR4-1866 6C/2.4GHz/15MB/85W/DDR4-1866 6C/1.9GHz/15MB/85W/DDR4-1600 Flex connector Power supply Front ports Rear ports Media reader IEEE 1394 Thunderbolt Mechanical Optional. Up to one Intel Xeon Phi Coprocessor 3120A, PCIe 2.0 x16 adapter, 57 cores, 1.1GHz, 28.5MB L2 cache, 6GB memory, 300W Memory DIMM 16 DIMM sockets (8 DIMMs per processor), 8-channel capable (4-channel per Environmental slots processor). RDIMM or LRDIMM (cannot be intermixed), ECC, DDR4, 2400MHz specification Memory capacity 896GB (LRDIMM, 14x64GB)/512GB (RDIMM, 16x32GB), 2nd CPU is needed Four PCIe 3.0 x16 slots for graphics and GPU computing cards, two slots per processor Graphics and Installed CPU Maximum quantity of PCIe x16 adapters per system (by power) Base warranty GPU computing Coprocessor 1 2 Supporting Graphics and GPU computing Disk drive controller Drive Bays Supporting storage 1x300W+1x75W or 2x150W 2x300W+2x75W, or 1x300W+2x150W+1x75W, or 4x150W Adapter Cores Memory Power SLI NVS 310 48 1GB 19.5W NVS 315 48 1GB 19.5W NVS 510 192 2GB 35W NVS 810 1024 4GB 68W Quadro K420 192 2GB 41W Quadro K620 384 2GB 45W Quadro K1200 512 4GB 45W Quadro K2200 640 4GB 68W Quadro K4200 1344 4GB 108W Quadro K5200 2304 8GB 150W SLI Quadro M4000 1664 8GB 120W Quadro M5000 2048 8GB 150W SLI Quadro M6000 3072 24GB 250W SLI Tesla K40 2880 12GB 235W Connector*** 2xDP 2xDVI-I SL/2xDP 4xmini DP 8xmini DP DVI-I DL+DP DVI-I DL+DP 4xmini DP DVI-I DL+2xDP DVI-I DL+2xDP DVI-I DL+DVI-D DL+2xDP 4xDP DVI-I DL+4xDP DVI-I DL+4xDP RAID 0, 1, 5, 10 with onboard SATA controller in chipset, 6Gb/s SATA. RAID 0, 1, 5, 10 with optional LSI RAID flex adapter, 12Gb/s SAS and SATA. RAID 0, 1, 5, 6, 10 with optional LSI 9364-8i PCIe adapter, 1GB memory, optional 1GB flash with super capacitor, 12Gb/s SAS and SATA Three external 5.25" bays, four internal 3.5" dual drives bays (see right) 3.5" SATA HDD, 7.2K 6Gbs 2.5" SAS HDD, 15K 12Gbs 2.5" SAS SSD, 12Gbs 2.5" SATA SSD, 6Gbs PCIe SSD, 2.5" PCIe SSD, M.2 PCIe SSD adapter 500GB/1TB/2TB/3TB/4TB/1TB hybrid/2TB hybrid 300GB/600GB 200GB/400GB/800GB 180GB/240GB/256GB/480GB/512GB/1TB, optional OPAL 400GB 256 GB/512GB 400GB Specification Two flex connectors (see right), one per processor. Supports one of the following: • Up to one LSI RAID flex adapter for SATA/SAS RAID. • Up to two Multi-I/O adapters for four PCIe SSD (two PCIe SSD per adapter). • Up to two M.2 flex adapters for four M.2 PCIe SSD (two M.2 PCIe SSD per adapter) Integrated two-port gigabit ethernet (Intel i218LM and i210AT), supports Wakeon-LAN. Optional discrete ethernet adapters are available Realtek ALC662 codec TCG 1.2-compliant One fixed 1300 watts, autosensing, 92% PSU, 80 PLUS Platinum qualified Note: PSU will automatically operate in 1120W (restricted mode) if the system line input is 100-110V. For other supported system line input voltages, the PSU will operate at the full 1300W. Four USB 3.0 (one Diagnostic, one Always On), one combo audio/microphone jack (3.5mm) Four USB 2.0, four USB 3.0 (blue), one serial (9-pin), two ethernet (RJ-45), three analog audio ports (line-in, line-out, mic-in), two PS/2 9-in-1 USB 2.0 card reader. Optional 29-in-1 USB 3.0 card reader on flex module Optional. Up to one 6-pin port on rear, one 6-pin port on flex module Optional. Up to one port on rear, or two ports on flex module • 55-liter: 200mm/7.87" W x 620mm/24.4" D x 446mm/17.56" H (with feet) • Tool-less parts: all except CPU fansink • 71.3 lb (32.3kg) max configuration Temperature - operating Temperature - non operating (no package) Temperature - non operating (with package) Altitude - operating Humidity - operating 50 o F to 95 o F (10 o C to 35 o C) 14 o F to 140 o F (-10 o C to 60 o C) -40 o F to 140 o F (-40 o C to 60 o C) (Unpressurized): 0-10000ft (0-3048m) 10%~80%, non-condensing Humidity - storage (with package) 10%~90%, non-condensing RoHS-compliant, GREENGUARD on all models. EPEAT Gold rating, ENERGY STAR 6.1 qualified on selected models. 3-year limited onsite service with 9x5/NBD Expansion slots 6-8 (top-down) Expansion slots Slot 1: PCIe 3.0 x16, full length, full height, Slot 2: PCIe 2.0 x1, full length, full height (half length if flex connector 1 is used) Slot 3: PCIe 3.0 x16, full length, full height Flex connector 2 Slot 4: PCIe 2.0 x1, full length, full height Slot 5: PCIe 2.0 x4, Half length, full height Slot 6: PCIe 3.0 x16, full length, full height, CPU2 needed Flex connector 1 (half length if flex connector 2 is used) Slot 7: PCIe 3.0 x16, full length, full height, CPU2 needed HDD 2 (half length if flex connector 2 is used) HDD 1 Slot 8: PCIe 2.0 x4, full length, full height, CPU2 needed HDD 4 HDD 3 Also supports up to two flex connectors. Flex connector 2 needs 2nd CPU Expansion slots 1-5 (top-down) Drive bays HDD 1-4: Standard 3.5" HDD bay, up to four 3.5" or 2.5" disk drives. Each 3.5" bay supports 2.5" (9mm or less) drive plus 3.5" drive, or two 2.5" (15mm or less) drives. More than 4 drives requires LSI RAID flex adapter or 9364-8i adapter, Flex bay: Three 5.25" flex bays, for HH optical drives. Or up to one optional flex module (Flex module supports one or more of the following options: 9.5mm optical/29-in-1 USB 3.0 reader/front IEEE 1394/front eSATA). Or up to two HDD bays for two drives, front access, 3.5" or 2.5" each For the latest list of ISV certifications, please visit www.lenovo.com/support/ISV For a list of all supported options, please visit https://download.lenovo.com/pccbbs/options_iso/ocm_april_2016.xlsx sheet Copyright Lenovo 2016. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2016:04:25 16:26:47+08:00 Metadata Date : 2016:04:25 16:26:47+08:00 Modify Date : 2016:04:25 16:26:47+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:9b5b5027-d282-409b-aa63-c310d26ae6f5 Original Document ID : adobe:docid:indd:583b09af-8829-11df-a512-d03f7b6152f1 Document ID : xmp.id:0DF0C950BF0AE611A16CB9F0ED45C335 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0DFEFD3BBF0AE611A16CB9F0ED45C335 Derived From Document ID : xmp.did:497A3EB69377E311A001E251C710EA30 Derived From Original Document ID: adobe:docid:indd:583b09af-8829-11df-a512-d03f7b6152f1 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2016:04:25 16:26:47+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 1 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools