Lenovo Yoga 710 11Isk 11Ikb Ug En 201608 01 User Manual (English) Guide 11ISK, Laptop (ideapad) Type 80V6

Yoga 710 11ISK - User Guide yoga_710-11isk_710-11ikb_ug_en Free User Guide for Lenovo Tablet and eReader, Manual - page3

User Manual: Lenovo Yoga 710-11Isk 710-11Ikb Ug En 201608 (English) User Guide - Yoga 710-11ISK, Yoga 710-11IKB Yoga 710-11IKB Laptop (ideapad) - Type 80V6 80V6

Open the PDF directly: View PDF .
Page Count: 33

Lenovo YOGA 710

YOGA 710-11ISK YOGA 710-11IKB

User Guide

Read the safety notices and important tips in the

included manuals before using your computer.

Notes

Before using the product, be sure to read Lenovo Safety and General Information Guide first.

The latest electronic compliance and environmental information are available from the

Lenovo compliance information Web sites.

To view compliance information go to: http://www.lenovo.com/compliance

To download environmental information go to: http://www.lenovo.com/ecodeclaration

Some instructions in this guide may assume that you are using Windows® 10. If you are

using another Windows operating system, some operations may be slightly different. If

you are using other operating systems, some operations may not apply to you.

The features described in this guide are common to most models. Some features may not

be available on your computer or your computer may include features that are not

described in this user guide.

The illustrations used in this manual are for Lenovo YOGA 710-11ISK unless otherwise

stated.

The illustrations in this manual may differ from the actual product. Please refer to the

actual product.

Regulatory Notice

For details, refer to Guides & Manuals at http://support.lenovo.com.

First Edition (March 2016)

© Copyright Lenovo 2016.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General

Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set

forth in Contract No. GS-35F-05925.

i

Contents

Chapter 1. Getting to know your computer..................................................................................... 1

Top view

......................................................................................................................................................... 1

Left-side view

................................................................................................................................................ 9

Right-side view

............................................................................................................................................ 10

Bottom view

................................................................................................................................................. 12

Chapter 2. Starting to use Windows 10 ......................................................................................... 13

Configuring the operating system for the first time

.............................................................................. 13

Operating system interface

........................................................................................................................ 13

Putting the computer to sleep or shutting it down ................................................................................ 15

Task and desktop management

................................................................................................................ 17

Connecting to a wireless network ............................................................................................................. 18

Get Started app

............................................................................................................................................ 18

Touch screen operation

.............................................................................................................................. 19

Chapter 3. Lenovo OneKey Recovery System.............................................................................. 22

Chapter 4. Troubleshooting............................................................................................................ 23

Frequently asked questions

....................................................................................................................... 23

Troubleshooting

.......................................................................................................................................... 25

Trademarks ...................................................................................................................................... 28

1

Chapter 1. Getting to know your computer

Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Note: The dashed areas indicate parts that are not visible externally.

Attention:

•When closing the display panel, be careful not to leave pens or any other objects in between the display

panel and the keyboard. Otherwise, the display panel may be damaged.

2

Chapter 1. Getting to know your computer

Integrated camera Use the camera for video communication or taking photos.

Built-in microphone Captures sound which can be used for video conferencing, voice

narration, or audio recording.

Wireless LAN antennas Connect to a wireless LAN adapter to send and receive wireless radio

signals.

Multi-touch screen The LCD display with LED backlight provides brilliant visual output.

Multi-touch function is available on this display.

Touchpad The touchpad functions as a conventional mouse.

Touchpad: To move the pointer on the screen, slide your fingertip over

the pad in the direction in which you want the pointer to move.

Touchpad buttons: The functions of the left/right side correspond to

that of the left/right mouse button on a conventional mouse.

Note: You can enable/disable the touchpad by pressing F6 ( ).

Chapter 1. Getting to know your computer

3

Using the keyboard

Function key combinations

Through the use of the function keys, you can change operational features instantly. To use this

function, press and hold Fn ; then press one of the function keys .

The following describes the features of each function key.

Fn + Esc: Enables/disables the paper display feature.

Fn + B: Activates the break function.

Fn + P: Activates the pause function.

Fn + C: Enables/disables the scroll lock.

Fn + S: Activates the system request.

Fn + :Activates the Pgup key function.

Fn + :Activates the Pgdn key function.

Fn + :Activates the home key function.

Fn + :Activates the end key function.

4

Chapter 1. Getting to know your computer

Hotkeys

You can access certain system settings quickly by pressing the appropriate hotkeys.

:Mutes/unmutes the sound.

:Decreases the volume level.

:Increases the volume level.

:Enables/disables the

microphone.

:Refreshes the desktop or the

currently active window.

:Enables/disables the touchpad.

:Enables/disables Airplane

mode.

:Enables/disables the integrated

camera.

:Locks the screen.

:

Toggles the display between the

computer and an external

display device.

:Decreases the display brightness.

:Increases the display brightness.

Setting hotkey mode

By default, the hotkey functions are accessible by pressing the appropriate hotkey. However,

you can disable the hotkey mode in the BIOS setup utility.

To disable the hotkey mode:

1Shut down the computer.

2Press the Novo button and then select BIOS Setup.

3In the BIOS setup utility, open the Configuration menu, and change the setting of HotKey

Mode from Enabled to Disabled.

4Open the Exit menu, and select Exit Saving Changes.

Note: When hotkey mode is disabled, press the Fn key and the appropriate hotkey to access the

corresponding hotkey function.

Chapter 1. Getting to know your computer

5

Positioning the display panel

The display panel can be opened to any angle up to 360 degrees.

Notebook Mode

Suitable for tasks that require a keyboard and mouse (such as creating documents, writing e-

mails, and so on).

6

Chapter 1. Getting to know your computer

Stand Mode (Theater Mode)

Suitable for tasks that require little or no touch (such as viewing photos or playing videos).

Tablet Mode

Suitable for tasks that require touching the screen often (such as surfing the Web, playing games,

and so on).

Chapter 1. Getting to know your computer

7

Tent Mode (Presentation Mode)

Suitable for tasks that require limited interaction with the touch screen (such as displaying

graphs or PowerPoint presentations).

Attention:

•Do not open the display with too much force, otherwise the panel or hinges may be damaged.

Note: The keyboard and touchpad are automatically locked when the screen is opened beyond 190 degrees

(approximately).

8

Chapter 1. Getting to know your computer

Screen orientation

You can rotate the display panel to your preferred orientation.

The orientation of the display automatically changes (alternating between portrait and

landscape modes) depending on how you hold it.

Portrait

Landscape

Chapter 1. Getting to know your computer

9

Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

AC power adapter jack Connects to the AC power adapter.

Battery status indicator

Indicator

Indicator status Charge

status Meaning

Battery

status

indicator

On (solid white) Charging The battery has more than 80% charge.

On (solid amber) Discharging The battery has between 5% and 20% charge.

Blinking slowly (white) Charging

The battery has between 20% and 80%

charge. When the battery reaches 80%

charge, the light will stop blinking.

However, charging will continue until the

battery is fully charged.

Blinking slowly (amber) Charging

The battery has less than 20% charge. When

the battery charge reaches 20%, the blinking

color will change to white.

Blinking quickly (amber) Discharging The battery has less than 5% charge.

Off Discharging The battery has more than 20% charge.

Combo audio jack Connects to headsets.

Notes:

•The combo audio jack does not support conventional microphones.

•The recording function might not be supported if third-party headphones or headsets are connected,

due to different industry standards.

10

Chapter 1. Getting to know your computer

Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Power status indicator

Power button Press this button to turn on the computer.

Indicator Indicator status Meaning

Power status indicator

On (solid white) The computer is powered on.

Blinking The computer is in sleep mode.

Off The computer is powered off.

Novo button When the computer is off, press this button to start the Lenovo OneKey

Recovery System or the BIOS setup utility, or to enter the boot menu.

Note: For details, see “Lenovo OneKey Recovery System” on page 22.

Micro HDMI port Connects to devices with micro HDMI input such as a TV or an external

display.

USB 3.0 port Connects to USB devices.

Note: For details, see “Connecting USB device” on page 11.

Chapter 1. Getting to know your computer

11

Connecting USB device

Your computer comes with one USB port compatible with USB devices.

The first time you plug a USB device into a particular USB port on your computer, Windows

automatically installs a driver for that device. After the driver has been installed, you can

disconnect and reconnect the device without performing any additional steps.

Note: Typically, Windows detects a new device after it has been connected, and then installs the driver

automatically. However, some devices may require you to install the driver before connecting. Check

the documentation provided by the device’s manufacturer before connecting the device.

Before disconnecting a USB storage device, make sure your computer has finished transferring

data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows

notification area to remove the device before disconnecting.

Note: If your USB device uses a power cord, connect the device to a power source before connecting it.

Otherwise, the device may not be recognized.

12

Chapter 1. Getting to know your computer

Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Speakers Provide audio output.

13

Chapter 2. Starting to use Windows 10

Configuring the operating system for the first time - - - - - - - - - - - - - - - - -

You may need to configure the operating system when it is first used.

The configuration process may include the procedures below:

• Accepting the end user license agreement

• Configuring the Internet connection

• Registering the operating system

• Creating a user account

Operating system interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Windows 10 comes with a powerful and useful start menu.

To open the start menu, do one of the following:

• Press the Windows key on the keyboard.

• Select Start on the lower-left corner of the desktop.

Get Started app

Settings button

Power button

All apps button

Start button

Search box

Task view button

14

Chapter 2. Starting to use Windows 10

Settings

Settings lets you perform basic tasks. You can also search for more settings with the settings

search box in the upper-right corner.

To open the settings, do the following:

• Open the start menu, and then select Settings .

Personalize the start menu

You can personalize the start menu with your favorite apps.

To personalize the start menu, do the following:

1Open the start menu, and then select All apps to display the apps list.

2Right click the app you want to add to the start menu, and then select Pin to Start.

Note: You can also drag apps from the Most used or All apps columns to add them to the start menu.

Chapter 2. Starting to use Windows 10

15

Putting the computer to sleep or shutting it down - - - - - - - - - - - - - - - - - - - -

When you have finished working with your computer, you can put it to sleep or shut it down.

Putting your computer to sleep

If you will be away from your computer for only a short time, put the computer to sleep.

When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the

startup process.

To put the computer to sleep, do one of the following:

• Close the display lid.

• Press the Power button.

• Open the start menu, and then select Power Sleep.

Note: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode)

before you move your computer. Moving your computer while the hard disk is spinning can damage

the hard disk, causing loss of data.

To wake the computer, do one of the following:

• Press any key on the keyboard. (Notebook mode only)

• Press the Power button.

16

Chapter 2. Starting to use Windows 10

Shutting down the computer

If you are not going to use your computer for a long time, shut it down.

To shut down the computer, do one of the following:

• Open the start menu, and then select Power Shut down.

• Press and hold or right-click the Start button in the lower-left corner and select Shut down or

sign out Shut down.

Chapter 2. Starting to use Windows 10

17

Task and desktop management - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Task view

To open the task view, do one of the following:

• Select the Task view button on the task bar.

• Press the Windows key + Tab.

• Swiping in from the left edge of the screen.

Virtual desktop management

Windows 10 supports the ability to create, manage and switch between virtual desktops.

To create a new virtual desktop, do one of the following:

• Open the task view, and then select New desktop.

• Press the Windows key + Ctrl + D.

To switch between different desktops, do one of the following:

• Open the task view and select the desktop you want active.

• Press the Windows key + Ctrl + to scroll through the desktops you’ve created.

18

Chapter 2. Starting to use Windows 10

Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Enabling wireless connection

To enable wireless functions, do the following:

1Press F7 ( ) to disable airplane mode.

2Click on the lower-right corner of the task bar to open the network configuration page.

Connecting to a wireless network

After wireless has been enabled, the computer will automatically scan for available wireless

networks and display them in the wireless network list. To connect to a wireless network, click

the network name in the list, and then click Connect.

Note: Some networks require a network security key or passphrase for connection. To connect to one of

those networks, ask the network administrator or the Internet service provider (ISP) for the security

key or passphrase.

Get Started app - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Windows 10 also provides the Get Started app to explain the new features of Windows 10.

You can find it on the start menu.

To open the Get Started app, do one of the following:

• Open the start menu and select Get Started .

•Press Fn + F1 (depending on your keyboard layout).

Chapter 2. Starting to use Windows 10

19

Touch screen operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

The display panel can accept inputs like a tablet, using the multi-touch screen, or like a

traditional notebook computer, using the keyboard and touchpad.

Multi-touch gestures

You can touch the screen with one or more fingertips to perform a variety of tasks.

Frequently used gestures Tasks performed

Tap

Tap once on an item.

Performs an action, such as starting an app,

opening a link, or performing a command.

Similar to left-clicking with a mouse.

Press and hold

Press your finger down and leave it there for a

moment.

Enables you to see detailed information

before selecting an action. Can also open a

menu with more options. Similar to right-

clicking with a mouse.

20

Chapter 2. Starting to use Windows 10

Zoom

Move two fingers together or apart while

touching the screen.

Zooms in and out on visual apps, such as

pictures and maps. Can also jump to the

beginning or end of a list.

Rotate

Place two or more fingers on an item and then

turn your hand.

Rotates an object (Note: Not all items can be

rotated, depending upon the app.).

Slide

Drag your finger across the screen.

Pans or scrolls through lists and pages. Can

also move an object or be used to draw or

write, depending upon the app. Similar to

pressing and holding to pan and to

scrolling with a mouse.

(continued)

Frequently used gestures Tasks performed

Chapter 2. Starting to use Windows 10

21

Swipe

Start from left/right edge of the screen, then

swipe inwards toward the center.

Swiping in from the left edge of the screen

can open the task view.

Swiping in from the right edge of the screen

displays the action center.

(continued)

Frequently used gestures Tasks performed

22

Chapter 3. Lenovo OneKey Recovery System

The Lenovo OneKey Recovery System is software designed to back up and restore your

computer. You can use it to restore the system partition to its original status in case of a system

failure. You can also create user backups for easy restoration as required.

Notes:

•If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery System is not

available.

•To utilize the features of the OneKey Recovery System, your hard disk already includes a hidden

partition by default to store the system image file and the OneKey Recovery System program files. This

default partition is hidden for security reasons, which explains why the available disk space is less than

the stated capacity.

Backing up the system partition

You can back up the system partition to an image file. This image file can be used to restore the

system partition. To back up the system partition:

1In Windows, press the Novo button or double-click OneKey Recovery icon to start the

Lenovo OneKey Recovery System.

2Click System Backup.

3Select a back-up location and click Next to start the backup.

Notes:

•You can choose a back-up location on the local hard disk drive or an external storage device.

•Remove the removable hard disk drive before starting the Lenovo OneKey Recovery System. Otherwise,

data from the removable hard disk drive might be lost.

•The back-up process may take a while.

•The back-up process is only available when Windows can be started normally.

Restoring

You can choose to restore the system partition to its original status or to a previously created

back-up point. To restore the system partition:

1In Windows, press the Novo button or double-click OneKey Recovery icon to start the

Lenovo OneKey Recovery System.

2Click System Recovery. The computer will restart to the recovery environment.

3Follow the on-screen instructions to restore the system partition to its original status or to a

previously created back-up point.

Notes:

•The recovery process is irreversible. Make sure to back up any data you wish to save on the system

partition before starting the recovery process.

•The recovery process may take a while. So be sure to connect the AC power adapter to your computer

during the recovery process.

•The above instructions should be followed when Windows can be started normally.

If Windows cannot be started, then follow the steps below to start the Lenovo OneKey Recovery

System:

1Shut down the computer.

2Press the Novo button. From Novo Button Menu, select System Recovery and press Enter.

23

Chapter 4. Troubleshooting

Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

This section lists frequently asked questions by category.

Finding information

What safety precautions should I follow when using my computer?

The Lenovo Safety and General Information Guide which came with your computer contains safety

precautions for using your computer. Read and follow all the precautions when using your

computer.

Where can I find the hardware specifications for my computer?

You can find the hardware specification for your computer on the printed flyers which came

with your computer.

Where can I find warranty information?

For detailed warranty information on this machine, please visit below website to check out:

support.lenovo.com/warrantystatus.

Drivers and preinstalled software

Where are the installation discs for Lenovo preinstalled software (desktop software)?

Your computer did not come with installation discs for Lenovo preinstalled software. If you

need to reinstall any preinstalled software, you can find the installation program on the D

partition of your hard disk. If you cannot find the installation program there, you can also

download it from the Lenovo consumer support website.

Where can I find drivers for the various hardware devices of my computer?

If your computer is preinstalled with a Windows operating system, Lenovo provides drivers for

all the hardware devices that you need on the D partition of your hard disk. You can also

download the latest device drivers from the Lenovo consumer support website.

Lenovo OneKey Recovery System

Where are the recovery discs?

Your computer did not come with any recovery discs. Use the Lenovo OneKey Recovery System

if you need to restore the system to its original factory status.

What can I do if the back-up process fails?

If you can start the backup but it fails during the back-up process, try the following steps:

1Close all open programs, and then restart the back-up process.

2Check to see if the destination media is damaged. Select another path and then try again.

When do I need to restore the system to its factory status?

Use this feature when the operating system fails to start up. If there is critical data on the system

partition, back it up before starting recovery.

24

Chapter 4. Troubleshooting

BIOS setup utility

What is the BIOS setup utility?

The BIOS setup utility is a ROM-based software. It displays basic computer information and

provides options for setting boot devices, security, hardware mode, and other preferences.

How can I start the BIOS setup utility?

To start the BIOS setup utility:

1Shut down the computer.

2Press the Novo button and then select BIOS Setup.

Getting help

How can I contact the customer support center?

See “Chapter 3. Getting help and service” in the Lenovo Safety and General Information Guide.

Chapter 4. Troubleshooting

25

Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Display problems

When I turn on the

computer, nothing appears

on the screen.

•If the screen is blank, make sure that:

- The AC power adapter is connected to the computer, and

the power cord is plugged into a working electrical outlet.

- The computer power is on. Press the Power button again

for confirmation.

•If these items are properly set, and the screen remains blank,

have the computer serviced.

When I turn on the

computer, only a white

cursor appears on a blank

screen.

•Restore backed-up files to your Windows environment or the

entire contents of your hard disk to its original factory

contents using the Lenovo OneKey Recovery System. If you

still see only the cursor on the screen, have the computer

serviced.

The screen goes blank

while the computer is on.

•Your screen saver or power management may be enabled.

Do one of the following to resume from sleep mode:

- Press any key on the keyboard. (Notebook mode only)

-Press the Power button.

Sleep problems

The critical low-battery

error message appears,

and the computer

immediately turns off.

•The battery power is getting low. Connect the AC power

adapter to the computer.

The computer enters sleep

mode immediately after

Power-on self-test

(POST).

•Make sure that:

- The battery pack is charged.

- The operating temperature is within the acceptable range.

See “Chapter 2. Use and care Information” in the Lenovo

Safety and General Information Guide.

Note: If the battery pack is charged and the temperature is within range, have the computer serviced.

The computer does not

return from sleep mode,

and the computer does not

work.

•If your computer is in sleep mode, connect the AC power

adapter to the computer, then press any key or the Power

button.

•If the system still does not return from sleep mode, stops

responding, or cannot be turned off, reset the computer.

Unsaved data may be lost. To reset the computer, press and

hold the Power button for eight seconds or more. If the

computer is still not reset, remove the AC power adapter.

26

Chapter 4. Troubleshooting

Display panel problems

The screen is blank. •Do the following:

- If you are using the AC power adapter or the battery pack,

and the battery status indicator is on, press F12 ( ) to

make the screen brighter.

- If the power indicator is blinking, press the Power button to

resume from sleep mode.

- If the problem persists, follow the solution in the next

problem “The screen is unreadable or distorted.”

The screen is unreadable

or distorted.

•Make sure that:

- The screen resolution and color quality are correctly set.

- The monitor type is correct.

Incorrect characters

appear on the screen.

•Is the operating system or programs installed correctly? If

they are installed and configured correctly, have the

computer serviced.

Sound problems

No sound can be heard

from the speakers even

when the volume is turned

up.

•Make sure that:

- The Mute function is off.

- The combo audio jack is not being used.

- Speakers are selected as the playback device.

Battery pack problems

Your computer shuts down

before the battery status

indicator shows empty.

-or-

Your computer operates

after the battery status

indicator shows empty.

•Recharge the battery.

Chapter 4. Troubleshooting

27

Other problems

Your computer does not

respond.

•To turn off your computer, press and hold the Power button

for eight seconds or more. If the computer still does not

respond, remove the AC power adapter.

•Your computer might lock when it enters sleep mode during

a communication operation. Disable the sleep timer when

you are working on the network.

The connected external

device does not work.

•Do not connect or disconnect any external device cables other

than USB while the computer power is on. Otherwise, you

might damage your computer.

•When using high power consumption external devices such

as an external USB optical disk drive, use an external device

power adapter. Otherwise, the device may not be recognized,

or the system may shut down as a result.

28

Trademarks

The following terms are trademarks or registered trademarks of Lenovo in the United States,

other countries, or both.

Lenovo

OneKey

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other

countries, or both.

Other company, products, or service names may be trademarks or service marks of others.

©Lenovo China 2016

en-US

Rev. RP01