Lepow Creative Technology B01 Lepow-Hi User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2452089
Application ID	PkPfTjcD9luPfBYTmnU9Ew==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.97kB (49617 bits)
Date Submitted	2014-11-23 00:00:00
Date Available	2014-11-24 00:00:00
Creation Date	2014-11-12 20:32:23
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2014-11-12 20:32:23
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	anbotek

Product Manual
Technical Parameters
Product Type: LEPOW-HI Smart Pack
Bluetooth Version: 3.0
Transmission Radius: 10m
Standby Time: 160h
Features: Multi-point connection
Bluetooth Chip: CSR BC6145
Bluetooth Protocol: HSP,HFP,A2DP
Please note:
Before trying the new product, please fully charge the bag，pair it with
selected Bluetooth device and set up the Smart Node.
1.
A.
B.
C.
About the product
Receive/End a call/Turn on/off button (MFB)
LED indicators
Loss-prevention vibration Smart Node
2. Turning on and off the Smart Node
Hold the MFB for 2 seconds and a blue light will flash to indicate it is
on or awake.
Hold the MFB for 4-5 seconds and a blue light will flash intermittently
to indicate it is paring.
Hold the MFB for 3 seconds and the blue light will flash with a
continuous vibration before shutting down.
3. Pairing the Smart Node to the phone
a. First time
Turn on the Smart Node. When LED indicator is blue and flashing
continuously, it enters automatically the pairing mode. Search on your
phone for the Bluetooth connection named: LePow-303 and connect. If
failed, please pair it again.
b. Subsequent pairing
Turn on the Smart Node. Hold the MFB for 2 seconds until the indicator
will flash. The headset will return to the connection to the phone.
4. The Smart Node function
Answering a call: Press the MFB less than 1 second on the Smart Node to
answer a call.
Ending a call: Press the MFB again to end the call.
Decline call: Hold the MFB for 1-3 seconds to decline in-coming call.
Voice dial: Press the MFB to start voice dial. To ensure the better
effect, we suggest the user wear a headset to record the last voice dial.
Double press the MFB and it will automatically dial the last call number.
5. Multiple device connection
The bag supports the function of multi-use, which means that the user
can connect to two smart devices in use (or other Bluetooth devices).
When the Smart Node connects to one device, turn off Bluetooth of the
first device and turn on another device to pair with the Smart Node.
Then turn on the first device again to return to the connection. Thus,
we get 1-to-2 connection.
6. Find my phone
Besides the function of hand-free calling and Bluetooth music player,
the bag also can help find the lost phones. It will alert the user with
vibration if the phone is 5-10 meters away from the bag.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without
restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : anbotek
Create Date                     : 2014:11:12 20:32:23+08:00
Modify Date                     : 2014:11:12 20:32:23+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : <463A5C616D79BDD3CAD6B5C4B0B8D7D35C32303134C4EA372D38D4C25C30313134303830313145C9EEDBDAC0D6C5DDB4B4D0C22DD6ECD3F1BDE02DC0B6D1C0C4A3BFE92D43C0E02DB6A1DCB22D46434320494428D0C5BFC6295C3031313430383031314528303132532920C0D6C5DD20D7CAC1CF5C31302
Creator                         : anbotek
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:64d4b829-0985-4792-a1ac-b727c4b59404
Instance ID                     : uuid:547169c2-4e04-4122-a1c5-cedc2e344072
Page Count                      : 3

EXIF Metadata provided by EXIF.tools