Leviton RZCPG Programmable Remote User Manual 2 of 2

Leviton Manufacturing Co., Inc. Programmable Remote 2 of 2

UserManual.wiki >

RZCPG User Manual >

User Manual 2 of 2

Contents

1. User Manual 1 of 2
2. User Manual 2 of 2

User Manual 2 of 2

Install CompleteNOTE: The INSTALL CHECKLIST screen will appear with the selection box around STEP 7 - Install Complete when you save your security selection.Press the center button to receive your conﬁrmation that the INSTALL CHECKLIST is now complete. Press the center button again to start using the RZCPG.The HOME screen of the RZCPG will be displayed. x1INSTALL CHECKLISTInstallation Checklistcomplete.Press buttonto start using RZCPG.x1Stand By-RZCPG-Default Profile1. Area #12. Area #23. Area #34. Area #4Menu12x1Back3. Update Controller4. Create Areas5. Set Associations6. Security7. Install CompleteNext StepINSTALL CHECKLISTSTEP 7

Pressing the right soft key while on the HOME screen will bring up the MAIN MENU screen where you can navigate through the various selections to edit or change settings.Selecting 1. Device List from the MENU screen will bring you to the DEVICE LIST screen where a list devices included in the network will appear. From this list you can rename devices by pressing the center button to select a device and using TEXT EDITOR (pg.6), control ON/OFF and adjust intensity levels. NOTE: Pressing the 2 OFF button with the selection box around a dimming device will bring up the DEVICE CONTROL menu where you can use the and buttons to precisely raise or lower the level with slide control, which will be displayed at the bottom.Selecting 2. Who Is from the MENU screen will bring you to the WHO IS... screen where you can identify your devices. Simply press a button on a network included device to obtain the node information.After the information is received by the RZCPG, it will display the device ID and the NAME assigned to the device you activated.MAIN MENU SCREENx1Ba ck MAIN MENU1. Device List2. "Who Is"3. Area4. Profile5. EventsHomex1Ba ck MAIN MENU3. Area4. Profile5. Events6. SettingsHome7. System SetupDEVICE LISTWHO ISx1BackWHO IS...Press button on unitAcquiring node infox1BackWHO IS...This is node #7Dimmer Scene CapRT SlaveName: Hall dimmerPressx1Ba ck (8)DEVICE LISTWho IsBedroomBathroomHallRZCPGRCRoom Controller131 ON OFF1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu

WEEKENDS, ONE TIME, MONTHLY, or WEEKLY). Press right soft key (Save) to complete your choice.Selecting 5. 12:00P allows you to set the event time. Use side arrow buttons to toggle between TIME OF DAY, DAWN or DUSK.DAWN or DUSK allows for an event to occur at a speciﬁed time relative to sunrise or sunset by using the or buttons and inputting the time period. NOTE: you must have a correct location inputed for this choice (refer to LOCATION pg. 17).There is also a Random box you can check or uncheck using the or buttons that will provide daily variations when selected.Press right soft key (Save) to complete. The EVENTS screen will display with your newly created event. The left soft key (Back) will return you to the MAIN MENU screen.x1CancelEVENT TIME12:00PRandomSaveTime of Dayx1BackEVENTS<< NEW >>Event #1Next Stepx1 Ba ck SETTINGS 1. Time 2. Contrast 3. Buzzer 4. Location 5. Security Homex1 Ba ck SETTINGS 5.6. Battery Level3. Location Buzzer4. SecurityHome7. Events SetupSETTINGSSelecting 6. Settings from the MAIN MENU screen will bring you to the SETTINGS screen.x1Ba ck MAIN MENU1. Device List2. "Who Is"3. Area4. Profile5. EventsHomeDATE & TIMESets the date and time for your RZCPG (refer to STARTUP pg. 5)161 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu

17BUZZERTurns the buzzer on the RZCPG keypad ON or OFF. When the buzzer is ON, a beep will be heard when pressing the keypad. When the buzzer is OFF, a click will be heard when pressing the keypad. The default setting is buzzer ON. Adjust the buzzer as follows:1. Select Buzzer.2. Use the side arrow buttons to turn buzzer ON or OFF.3. Press right soft key (Save) to complete.x1CancelBUZZERSaveBuzzer OFFLOCATIONThis feature is used when calculating of DAWN or DUSK for EVENTS is required and to enable or disable Daylight Savings time. Set the location for your RZCPG as follows:1. Select Location.2. Use the arrow buttons to navigate and set the location using the and buttons.3. Use or button to enable or disable Daylight Savings (DLS). NOTE: Select US or EU with button.4. Press right soft key (Save) to complete.x1CancelLOCATION SETUPSaveLatitude : N 041˚Longitude : W 074˚Time Zone : GMT-5DLS : EnableUS EUCONTRASTSets the contrast for your RZCPG LCD screen as follows:1. Select Contrast.2. Use the and buttons to adjust the percentage of contrast.3. Press right soft key (Save) to complete.x1CancelCONTRASTSave050 %1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu

18SECURITYSets the password and lock level for your RZCPG or System (refer to INSTALLATION CHECKLIST - Security pg. 11).BATTERY LEVELDisplays the battery level and charger status for your RZCPG as follows:1. Select Battery Level.2. Battery level will be displayed when charger is OFF. Battery level and temperature will be displayed when charger is ON. NOTE: Battery icon will ﬂash as indicator when charging.x1BackBATTERY LEVELHome- 2.88 + Charger is OFFBattery Powerx1BackBATTERY LEVELHome- 2.88 + Charger is ONDC PowerBatt temp 35 CEVENTS SETUPAllows you to enable or disable ALL events for your RZCPG as follows:1. Select Events Setup.2. Use up and down arrow buttons to scroll between "Enable All Events" and "Disable All Events".3. Use button to select and press right soft key (Save) to complete.x1CancelEVENT SETUPSaveEnable ALL EventsDisable ALL Events1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand ByMenu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu1 ON 2 ON 3 ON 4 ON OFF OFF OFF OFF x1 12:00 PM Mon 05.01.200 6 Default Pr ofil e Stand By Menu

Selecting 1. Network from the ADVANCED screen will bring you to the NETWORK screen. x1BackADVANCED1. Network2. Association3. HAI Setup4. RTS Devices5. UtilitiesHomex1BackNETWORK1. Include Node2. Exclude Node3. Ntwk Rediscovery4. Update Devices5. Remove FailedHomex1BackNETWORK5. Remove Failed6. Join Network7. RZCPG Utils8. Replace Node9. Dev PropertiesHome1. Include Node (refer to INSTALLATION CHECKLIST pg. 5)2. Exclude Node Use this option to remove a device from the network (refer to the individual device instruction sheet for details).3. Network Rediscovery This feature is used for updating your network, speciﬁcally if nodes have moved or the network environment has changed. NETWORK19Selecting 7. System Setup from the MAIN MENU screen will bring you to the SYSTEM SETUP screen.Selecting 1. Install Checklist brings you to the Installation Checklist (refer to pg. 5). NOTE: This feature is not available on secondary remotes. Selecting 2. Advanced will prompt you to continue with Advanced Settings. Pressing the right soft key (YES) will bring you to the ADVANCED screen.NOTE: If you are unsure about any of the following ADVANCED SETTINGS consult ViziaRF application guide or visit our website at www.ViziaRF.com. x1BackSYSTEM SETUP1. Install Checklist2. AdvancedHomeSYSTEM SETUPx1NOADVANCEDAdvancedSettings?YES

It will optimize the mesh network to ensure overall system routing integrity. 4. Update Controllers (refer to INSTALLATION CHECKLIST - Update Controller pg. 8).5. Remove Failed Use this option to detect devices that are non-operational and require removal from the network. Once the list is generated, you will press the center button to select a device to remove. Press the right soft key (YES) to remove the device from the network.6. Join as Secondary This feature allows you to join this Leviton RZCPG as a secondary remote to the network. Press the right soft key (YES) after the prompt to continue. NOTE: This step will erase any existing data in the remote. You will then be required to include this remote with your primary controller. Follow the controller inclusion/replication process of your primary controller (for RZCPG see pg. 7). This secondary remote will prompt you to start building the node list. Press right soft key (YES) to complete. A conﬁrmation (version) screen will display the same Home ID as the primary, a new Node ID, a new serial number and an x2 designation at the top. NOTE: The x1Back HomeNTWK REDISCOVERYPowerlevel -6DBTo change powerlevelpress [4 OFF]Start? Pressx1NO YESJOIN AS SECONDARYWARNING!This step will eraseall the dataContinue?x1CancelFAILED NODEBuilding Node ListComplete...65%x1Ba ck REMOVE FAILEDHomeBedroomBathroomHallRoom Controllerx1NOREMOVE FAILEDYESBedroomNode 2Remove?x2NO YESJOIN AS SECONDARYWould you liketo start buildingnode list?20

21secondary remote will be populated with only the device data of the primary remote (not Areas, Proﬁles, Events). You can create new Areas, Proﬁles and Events with your secondary remote. If you wish to duplicate the secondary RZCPG remote with the primary RZCPG remote's application information, use RZCPG Utilities. 7. RZCPG Utilities This feature allows you to duplicate all necessary network data from a primary RZCPG remote into your secondary RZCPG remotes. 1. Get RZCPG Data is selected from the receiving RZCPG remote to retrieve the selected data (Areas Proﬁles, Events) from the sending RZCPG remote. 2. SEND RZCPG data is selected from the primary RZCPG remote to transfer the data. Follow the prompts to complete this process. NOTE: Update DB (no. 3 and 4) are only available on secondary RZCPG remotes. 3. Update DB (Man) is used to manually perform a database update (devices in the network, their names and types) for a secondary remote that has joined the network. It will require you to press buttons on each individual device you wish to update in your secondary remote. 4. Update DB (Aut) is used to perform an automatic database update (devices in the network, their names and types) for a secondary remote that has joined the network.8. Replace Node Use this option to replace non-operational devices in the network. Once the list is generated, you will press the center button x1Back HomeRX DATASetup DataAreasProfilesStart? PressSelect receive itemsx1Back HomeTX DATAWhen promptedon receiving unitpress one of thegroup buttonsx1Back HomeRZCPG UTILS1. Get RZCPG Data2. Send RZCPG Data3. Update DB (Man)4. Update DB (Aut)

to select a device to replace. You will be prompted to prepare the controller to be replaced or to press a button on a slave device to be replaced when prompted. The button press will occur after you initiate the replacement process by pressing the center button on the RZCPG. After replacement you can name the replacing device (refer to TEXT EDITOR pg. 6). Once your name is saved, you will receive conﬁrmation that the node has been replaced.ASSOCIATIONSelecting 2. Association from the ADVANCED screen will bring you to the ASSOCIATION screen. NOTE: Consult ViziaRF application guide for advanced ASSOCIATION options. x1BackASSOCIATIONRoom ControllerHall ControllerDen ControllerHomex1CancelFAILED NODEBuilding Node ListComplete...65%x1Back (4)PROPERTIESRZCPGRCBedroomHallHomeRoom Controllerx1BackPROPERTYName: RZCPGNID: 001 Cntrl RoomPortable RemoteHomeMfg. by Levitonx1Ba ck REPLACE NODEHomeBedroomBathroomHallRoom Controllerx1Ba ck REPLACE NODEHomePrepare replacingcontroller or pressbutton on slavewhen promptedStart? Pressx1Back Next Step Node replaced!Node ID# 8:GarageMore? PressREPLACE NODE9. Device Properties This feature will display information about a particular device (Name, Node ID and Description) when selected from the list.22

231. Who Is... (refer to WHO Is... pg.13).2. Version This feature displays the ViziaTMRF and Z-WaveTM versions, the Home ID, Node ID and Serial No. of your RZCPG. You can also access this screen by pressing the center button while on the HOME screen.UTILITIESSelecting 5. Utilities from the ADVANCED screen will bring you to the UTILITIES screen.x1Back HomeUTILITIES1. Who Is2. Version3. Rediscovery4. Dev Properties5. Resetx1Back HomeUTILITIES3. Rediscovery4. Device Property5. Reset6. Test ZWRTS DEVICESSelecting 4. RTS Devices from the ADVANCED screen will bring you to the RTS DEVICES screen. This is a network optimization feature which can enhance performance and communication ability (refer to ViziaRF application guide).x1BackRTS DEVICES1. Set Routes2. Set Hail3. Update RoutesHomeHAI SETUPSelecting 3. HAI Setup from the ADVANCED screen will bring you to the HAI SETUP screen. This feature allows for the creation of subscriptions for devices when setting up a PC interface (refer to ViziaRF application guide). x1Back (3)HAI SETUPHomeBedroomHallRoom Controllerx1BackVIZIA RF V1.XAZ-Wave 2.06Dec 7 2006HID: 00989680NID: 1S/N: 007358DH

3. Rediscovery PL This feature allows you to change the power level used for network rediscovery (refer to Network Rediscovery pg. 19).4. Device Properties (refer to Device Properties pg. 22).5. Reset Resets your RZCPG back to factory default and erases any programmed information from the remote. NOTE: Resetting the RZCPG to factory default does not reset your devices. If you want to factory reset your devices refer to the individual device instruction sheet for that device.6. Test ZW WARNING: FOR FACTORY USE ONLY! DO NOT USE.24x1Cancel SaveREDISCOVERY PL-3 DB+/– to adjustx1RESETALL DATAWILL BELOSTPROCEED?NO YES

Navigation menu