Lexmark 0528RFU UHF RFID Option User Manual Scanned

Download:
Mirror Download [FCC.gov]
Document ID	3200085
Application ID	HpBMiocBh1Z96VadYa41MQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.38kB (1779701 bits)
Date Submitted	2016-11-18 00:00:00
Date Available	2016-11-18 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Lexmark X952
Document Lastmod	0000-00-00 00:00:00
Document Title	Scanned Document
Document Creator	HardCopy

3088223-003
HIIiIIlNlllllllillllllHlHWIIIIHIHIH
Notices
October 2016
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK
INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED. INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITV OR FITNESS FOR A
PARTICULAR PURPOSE. Some states do not allowdisclaimer of express or implied warranties in certain transactions; therefore,
this statement may not apply to you.
This publication could includetechnical inaccuracies ortypographical errors. Changes are periodically madeto the information
herein; these changes will be incorporated in later editions, Improvements or changes in the products or the programs
described may be made at any time.
References in this publication to products, programs. or sen/ices do not imply that the manufacturer intends to make these
available in all countries in which it operates. Any reference to a product, program, or Sel'VlCe is not intended to state or imply
that only that product. program, or service may be used. Any functionally equivalent product, program, or service that does
not infringe any existing intellectual property right may be used instead. Evaluation and verification ofoperation in conjunction
with other products, programs, or services, except those expressly de5ignated by the manufacturer, are the user's
responsibility.
For Lexmark technical support. visit http://suggortJexrnarkcorn.
For information on supplies and downloads. viSit www.lexmark,com.
© 2016 Lexmark International. Inc.
All rights reserved.
GOVERNMENT END USERS
The Software Program and any related documentation are "Commercial items," as that term is defined in 48 C.F.R. 2.101,
"Computer Software“ and "Commercial Computer Software Documentation." as such terms are used in 48 C.F 12.212 or 48
C.F.R. 227.7202. as applicable. Consistent with 48 C.F.R. 12,212 or 48 C.F.R. 227720271 through 227.7207-4, as applicable.
the Commercial Computer Software and Commercial Software Documentation are licensed to the US Government and users
(a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and
conditions herein,
Trademarks
Lexmark and the Lexmark logo are trademarks or registered trademarks of Lexmark International, Inc. in the United States
and/or other countries.
All other trademarks are the property of their respective owners.
Federal Communications Commission (FCC) compliance information statement
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
deVIce must accept any interference received. including interference that may cause undesired operation.
The FCC Class El limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a residential installation This equipment generates. uses. and can radiate radio frequency energy and, if not
installed and used in accordance With the instructions. may cause harmful interference to radio communications. However.
there is no guarantee that interference Will not occur in a particular installation. If this equipment does cause harmful
interference to radio or televrsion reception. which can be determined by turning the equipment offand on. the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorieht or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
Consult your point of purchase or sewice representative for additional suggestions
The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or
by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user‘s
authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use a
properly shielded and grounded cable such as Lexrnark part number 1021231 for parallel attach or 1021294 for USB attach.
Use ofa substitute cable not properly shielded and grounded may result in a violation of FCC regulations.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International. Inc,
740 West New Circle Road
Lexington. KY 40550
(359123273000
Modular component notice
This product contains a radio module that transmits in the 900MHz frequency band. The transmitter has FCC and Industry
Canada modular approvals: FCC ID.IYL0528RFU and Industry Canada lC:2376A-0528RFU.
Radiation exposure statement
The radiated output power ofthis deVice is far below the radio frequency exposure limits of the FCC, industry Canada, and
other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any
persons for this deVice to satisfy the RF exposure requirements ofthe FCC, Industry Canada, and other regulatory agencies.
Pursuant to Part1521 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the
manufacturer may cause harmful interference and void your authority to operate this equipment. Use of supplied data cable
Is required to comply With the limits of Part15 ofthe FCC Rules.This product does not contain any user serviceable components
and is to be used with the supplied antenna only.
Industry Canada compliance statement
This device complies with Industiy Canada Iicense»exempt RSS standards. Operation is subiect to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference thal may
cause undesired operation of the device.
This Class 8 digital apparatus meets all requirements ofthe Canadian InterferencerCausing Equipment Standard ICESVOO3.
Avis
Janvier 2016
Le paragraphe suivant ne s‘applique pas aux pays dans Iesquels Iesdites clauses he sent pas conformes a la legislation
en Vigueur : LEXMARK INTERNATIONAL. INC. FOURNIT CETTE PUBLICATION "TELLE OUELLE", SANS GARANTIE D'AUCUNE
SORTE. EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS SANS SE LIMITER AUX GARANTIES IMPLICITES DE COMMERCIABILITE
OU DE CONFORMITE A UN USAGE SPECIFIQUE. Certains Etats n'admettent pas la renonciation aux garanties explicites ou
implicites pour certaines transactions ; c'est pourquoi il se peut que cette declaration ne vous concerne pas.
Cette publication peut contenir des imprecisions techniques ou des erreurs typographiques, Des modifications sont
périodiquement apportées aux informations contenues dans ce document : ces modifications seront intégre’es dans les
e'ditions ulterieures. Des ame’iiorations ou modifications des produits ou programmes décrits dans cette publication peuvent
intervenir a tout moment.
Dans la presente publication, les references a des produits. programmes on serVices n'impliouent nullement la volonté du
fabricant de les rendre disponibles dans tous les pays ou ceiui-ci exerce une actIVité. Toute référence a un produit, programme
ou seNice n’affirme ou n‘implique nullement que seul ce produit, programme ou sen/ice puisse étre utilise. Tout produit,
programme ou service equivalent par ses fonctions, n‘enlreignant pas les droits de propriéte‘ intellectuelle, peut elre utilise’ a
la place, L‘e’valuation et la verification du fonctionnement en association avec d'autres produits, programmes ou servrces, a
l'exception de ceux expresse’ment de’s‘igne’s par le fabricant. se font aux seuls risques de I'utilisateur.
Pour contacter I‘assistance technique de Lexmark, consultez la page http://suoporuexmark.comt
Pour obtenir des iniormations sur les consommables et les téléchargements, viSItez le Site wwwolexmarkcom,
© 2016 Lexmark International. Inc.
Tous droits réservés.
Marques commerciales
Lexmark et Ie logo Lexmark sont des marques commerciaies ou des marques dépose’es de Lexmark International. Inc. aux
Eiats-Unis et dans d'aunes pays.
Les autres marques commerciales sont Ia propriélé de leurs détenteurs respectifs.
Avis sur les composants modulaires
Ce produit coniient un moduie radio e’mettam dans la bande de fre’quence 900 MHz. L'émeneur dispose des approbations
pour composants modulaires de la FCC et d‘lndustrie Canada : ID FCC :iYL0528RFU et Indusirie Canada IC :2376A-0528RFU.
Déclaration relative a l'exposition aux rayonnements
Le courarit de sortie rayonrié de cet appareil est bien inférieur aux limiles d'exposiiion aux fréquences radio définies par
la FCC. Industrie Canada at les autres organismes de réglementation. Au minimum 20 cm (8 pouces) doivenk séparer l'amenne
de toule personne pour que cel appareil réponde aux exigences d'exp05ition aux fréquences radio de la FCC, d'industrie
Canada at d'aulres organismes de réglemeniation.
Conicrme’meni a la panie1521du réglement de la FCC. tout changemeni ou modificaiion de i’équipement qui n'aurait pas
été expressément approuve’ par le fabricant peut élre a l'origine d'inierférences nuisibles el annuler Voire droil de faire
fonctionner i’équipemeni. L'utilisation du cable de données fourni doii éire conforme aux iimitations exposées dans la panie
15 du r'eglement de la FCC. Ce produit ne coniieni aucun composant réparable ou remplagable par I'utilisateui ei doit ézre
ulilisé aver: l‘antenne iournie uniquemeni.
Déclaration de conformité lndustrie Canada
Cet apparell est conforme aux normes RSS exempies de licence d'lndustrie Canada. Son fonctlonnement estsoumis aux deux
conditions suivarites : (1) cat appareil ne doit pas causer d'interfe’rences et (2) il doit accepter mules les interferences. y compris
les inleriérences pouvant enirainer un fonctionnement indésirabie.
Ce! appareil nume’rique do classe B répond a i'ensemble des exigences de la norme canadienne sur Ie materiei brouilleur
(NMEVOOEI).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Creator                         : HardCopy
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : HardCopy
Producer                        : Lexmark X952
Format                          : application/pdf
Title                           : Scanned Document
Page Count                      : 5

EXIF Metadata provided by EXIF.tools