Lexmark 19Z0100 Users Manual User's Guide
832 v10621139_en
X862DTE to the manual 95ae6d13-dc04-4f4a-97b8-671ae3ed46ba
2015-01-23
: Lexmark Lexmark-19Z0100-Users-Manual-268704 lexmark-19z0100-users-manual-268704 lexmark pdf
Open the PDF directly: View PDF
Page Count: 315 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Safety information
- Learning about the printer
- Minimizing your printer's environmental impact
- Additional printer setup
- Loading paper and specialty media
- Setting the Paper Size and Paper Type
- Configuring Universal paper settings
- Loading the standard or optional 500-sheet trays
- Loading A5 or Statement paper sizes
- Loading B5 or Executive paper sizes
- Loading the 2000-sheet high capacity feeder
- Loading the 2,000-sheet dual input trays
- Loading the multipurpose feeder
- Loading letter- or A4-size paper in the short-edge orientation
- Linking and unlinking trays
- Paper and specialty media guidelines
- Printing
- Copying
- Making copies
- Copying photos
- Copying on specialty media
- Customizing copy settings
- Copying from one size to another
- Making copies using paper from a selected tray
- Copying a document that contains mixed paper sizes
- Copying on both sides of the paper (duplexing)
- Reducing or enlarging copies
- Adjusting copy quality
- Collating copies
- Placing separator sheets between copies
- Copying multiple pages onto a single sheet
- Creating a custom job (job build)
- Placing information on copies
- Canceling a copy job
- Understanding the copy screens and options
- Improving copy quality
- E-mailing
- Faxing
- Scanning to an FTP address
- Scanning to a computer or flash drive
- Understanding printer menus
- Maintaining the printer
- Administrative support
- Troubleshooting
- Solving basic problems
- Understanding printer messages
- An error has occured with the Flash Drive. Please remove and re-insert the drive.
- Change <input src> to <Custom Type Name>
- Change <input src> to <Custom Type Name> load <orientation>
- Change <input src> to <Custom String>
- Change <input src> to <Custom String> load <orientation>
- Change <input src> to <size>
- Change <input src> to <size> load <orientation>
- Change <input src> to <type> <size>
- Change <input src> to <type> <size> load <orientation>
- Check <input src> guides
- Check <input src> orientation or guides
- Close door <x>
- Close cover <x>
- Close surface H
- Disk corrupted
- Empty the hole punch box
- Weblink server not set up. Contact system administrator.
- Disk Full - Scan Job Canceled
- Fax memory full
- Fax server 'To Format' not set up. Contact system administrator.
- Fax Station Name not set up
- Fax Station Number not set up
- Insert Tray <x>
- Load <src> with <x>
- Load <input src> with <Custom Type Name>
- Load <input src> with <Custom String>
- Load <input src> with <type> <size>
- Load <input src> with <size>
- Load manual feeder with <x>
- Load Manual Feeder with <Custom Type Name>
- Load Manual Feeder with <Custom String>
- Load Manual Feeder with <size>
- Load Manual Feeder with <type> <size>
- Load Staples [G5, G11, G12]
- Memory full, cannot print faxes
- Remove paper from <linked bin set name>
- Remove paper from all bins
- Remove paper from bin <x>
- Remove paper from standard output bin
- Replace all originals if restarting job.
- Replace last scanned page and jammed originals if restarting job.
- Restore Held Jobs?
- Replace jammed originals if restarting job.
- Scan Document Too Long
- Scanner ADF Cover Open
- Scanner jam, remove all originals from the scanner
- Scanner Jam Access Cover Open
- Serial <x>
- Some held jobs were not restored
- 30 Invalid refill, change cartridge
- 31.yy Replace defective or missing cartridge
- 32 Cartridge part number unsupported by device
- 34 Short paper
- 34 Incorrect media, check <input src> guides
- 35 Insufficient memory to support Resource Save feature
- 37 Insufficient memory to collate job
- 37 Insufficient memory for Flash Memory Defragment operation
- 37 Insufficient memory, some Held Jobs were deleted
- 37 Insufficient memory, some held jobs will not be restored
- 38 Memory full
- 39 Complex page, some data may not have printed
- 50 PPDS font error
- 51 Defective flash detected
- 52 Not enough free space in flash memory for resources
- 53 Unformatted flash detected
- 54 Network <x> software error
- 54 Serial option <x> error
- 54 Standard network software error
- 55 Unsupported option in slot <x>
- 56 Parallel port <x> disabled
- 56 Serial port <x> disabled
- 56 Standard parallel port disabled
- 56 Standard USB port disabled
- 56 USB port <x> disabled
- 57 Configuration change, held jobs were not restored
- 58 Too many bins attached
- 58 Too many disks installed
- 58 Too many flash options installed
- 58 Too many trays attached
- 61 Remove defective disk
- 62 Disk full
- 63 Unformatted disk
- 80 Routine maintenance needed
- 84 Insert photoconductor
- 84 Photoconductor low
- 84 Replace photoconductor
- 84 Photoconductor abnormal
- 88 Cartridge low
- 88 Replace cartridge to continue
- 298.01 Scanner Missing - Cable Unplugged
- 1565 Emulation error, load emulation option
- Clearing jams
- Solving printing problems
- Multiple-language PDFs do not print
- Error message about reading USB drive appears
- Jobs do not print
- Make sure the printer is ready to print
- Check to see if the standard exit bin is full
- Check to see if the paper tray is empty
- Make sure the correct printer software is installed
- Make sure the internal print server is installed properly and working
- Make sure you are using a recommended USB, serial, or Ethernet cable
- Make sure printer cables are securely connected
- Confidential and other held jobs do not print
- Job takes longer than expected to print
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Solving copy problems
- Copier does not respond
- Scanner unit does not close
- Poor copy quality
- Check the display for error messages
- The toner may be low
- The scanner glass may be dirty
- The copy is too light or too dark
- Check the quality of the original document
- Check the document placement
- Unwanted toner is in the background
- Patterns (moiré) appear in the output
- Text is light or disappearing
- The output appears washed out or overexposed
- Partial document or photo copies
- Solving scanner problems
- Solving fax problems
- Caller ID is not shown
- Cannot send or receive a fax
- Check the display for error messages
- Check the power
- Check the printer connections
- Check the telephone wall jack
- Review this digital phone service checklist
- Check for a dial tone
- Temporarily disconnect other equipment
- Check for jams
- Temporarily disable Call Waiting
- Voice Mail service may be interfering with the fax transmission
- The printer memory may be full
- Can send but not receive faxes
- Can receive but not send faxes
- Received fax has poor print quality
- Solving option problems
- Solving paper feed problems
- Solving print quality problems
- Isolating print quality problems
- Blank pages
- Clipped images
- Ghost images
- Gray background
- Incorrect margins
- Paper curl
- Print irregularities
- Print is too dark
- Print is too light
- Repeating defects
- Skewed print
- Solid black or white streaks appear on transparencies or paper
- Streaked horizontal lines
- Streaked vertical lines
- Toner fog or background shading appears on the page
- Toner rubs off
- Toner specks
- Transparency print quality is poor
- Contacting Customer Support
- Notices
- Product information
- Edition notice
- UNITED STATES GOVERNMENT RIGHTS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- Modular component notice
- Noise emission levels
- Temperature information
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Product disposal
- ENERGY STAR
- Laser notice
- Laser advisory label
- Power consumption
- European Community (EC) directives conformity
- Radio interference notice
- CCC EMC notice
- BSMI notice
- Regulatory notices for telecommunication terminal equipment
- Notice to users of the US telephone network: FCC requirements
- South Africa telecommunications notice
- Notice to users of the Canadian telephone network
- Notice to users of the New Zealand telephone network
- Notice to Users in the European Union
- Regulatory notices for wireless products
- Exposure to radio frequency radiation
- Notice to users in Brazil
- Industry Canada (Canada)
- Taiwan NCC RF notice statement
- India emissions notice
- Notice to users in the European Union
- Statement of Limited Warranty
- LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
- ADOBE SYSTEMS INCORPORATED NOTICE
- Index