Lexmark 420 Users Manual User's Guide
Lexmark-Lexmark-E360-Owner-S-Manual lexmark-lexmark-e360-owner-s-manual
E360d Series v14843601_en
2015-01-23
: Lexmark Lexmark-420-Users-Manual-268643 lexmark-420-users-manual-268643 lexmark pdf
Open the PDF directly: View PDF
Page Count: 144 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Safety information
- Learning about the printer
- Additional printer setup
- Minimizing your printer's environmental impact
- Loading paper and specialty media
- Paper and specialty media guidelines
- Printing
- Understanding printer menus
- Maintaining the printer
- Administrative support
- Clearing jams
- Troubleshooting
- Understanding printer messages
- Close door
- Load <input src> with <custom type name>
- Load <input src> with <custom string>
- Load <input src> with <size>
- Load <input src> with <type> <size>
- Load manual feeder with <type> <size>
- Load manual feeder with <custom type name>
- Load manual feeder with <custom string>
- Load manual feeder with <size>
- Remove paper from standard output bin
- 30.yy Invalid refill, change cartridge
- 31.yy Replace defective or missing cartridge
- 32.yy Cartridge part number unsupported by device
- 32.yy Replace unsupported cartridge
- 34 Short paper
- 35 Insufficient memory to support Resource Save feature
- 37 Insufficient memory for Flash Memory Defragment operation
- 37 Insufficient memory to collate job
- 38 Memory full
- 39 Complex page, some data may not have printed
- 51 Defective flash detected
- 52 Not enough free space in flash memory for resources
- 53 Unformatted flash detected
- 54 Standard network software error
- 56 Standard USB port disabled
- 56 Standard parallel port disabled
- 58 Too many flash options installed
- 58 Too many trays attached
- 59 Incompatible tray <x>
- 84 PC Kit life warning
- 84 Replace PC Kit
- 88 Cartridge is low
- 88 Replace toner
- Solving basic printer problems
- Printer control panel display is blank or displays only diamonds
- Solving printing problems
- Jobs do not print
- Make sure the printer is ready to print
- Check to see if the standard exit bin is full
- Check to see if the tray is empty
- Make sure the correct printer software is installed
- Make sure the printer is connected to the network
- Make sure you are using a recommended USB, parallel, or Ethernet cable
- Make sure printer cables are securely connected
- Job takes longer than expected to print
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Jobs do not print
- Solving option problems
- Solving paper feed problems
- Solving print quality problems
- Isolating print quality problems
- Blank pages
- Characters have jagged or uneven edges
- Clipped images
- Gray background
- Ghost images
- Incorrect margins
- Paper curl
- Print is too dark
- Print is too light
- Skewed print
- Toner fog or background shading appears on the page
- Toner rubs off
- Toner specks
- Transparency print quality is poor
- Streaked horizontal lines
- Streaked vertical lines
- Solid black or white streaks appear on transparencies or paper
- Embedded Web Server does not open
- Contacting Customer Support
- Understanding printer messages
- Notices
- Product information
- Edition notice
- UNITED STATES GOVERNMENT RIGHTS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- Modular component notice
- Noise emission levels
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Static sensitivity notice
- ENERGY STAR
- Mercury statement
- Temperature information
- Laser notice
- Laser advisory label
- Power consumption
- Regulatory notices for wireless products
- Exposure to radio frequency radiation
- Industry Canada (Canada)
- Notice to users in the European Union
- Statement of Limited Warranty
- LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
- ADOBE SYSTEMS INCORPORATED NOTICE
- Index