Lexmark Series E460Dw Users Manual User's Guide
2015-01-23
: Lexmark Lexmark-Series-E460Dw-Users-Manual-269155 lexmark-series-e460dw-users-manual-269155 lexmark pdf
Open the PDF directly: View PDF
Page Count: 183 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Safety information
- Learning about the printer
- Additional printer setup
- Loading paper and specialty media
- Paper and specialty media guidelines
- Printing
- Clearing jams
- Understanding printer menus
- Understanding printer messages
- List of status and error messages
- Activating Menu Changes
- Busy
- Busy ...
- Calibrating
- Cancel not available
- Canceling
- Cartridge Low
- Cartridge Nearly Low
- Cartridge Life Exceeded
- Change <src> to <x>
- Clearing job accounting statistics
- Close front door
- Defragmenting Flash DO NOT POWER OFF
- Deletion complete
- Deletion failed
- Deleting held jobs
- Disabling Menus
- DO NOT TOUCH Reading flash data DO NOT POWER OFF
- Enabling Menus
- Flushing buffer
- Formatting Flash DO NOT POWER OFF
- Hex Trace
- Hex Trace Ready
- Invalid Engine Code
- Invalid Network Code
- Load manual feeder with <x>
- Load <src> with <x>
- Maintenance
- Menu access turned off by system administrator
- Menus are Disabled
- Must be in Ready state to enter menus
- Narrow media enabled
- Network/Network <x>/Network <x>, <y>
- No jobs to cancel
- Not Ready
- Parallel/Parallel <x>
- PC Kit Life Warning
- [PJL RDYMSG]
- Power Saver
- Printing
- Programming flash DO NOT POWER OFF
- Programming System Code DO NOT POWER OFF
- Ready
- Remote Management Active DO NOT POWER OFF
- Remove paper from standard bin
- Remove paper from standard output bin
- Replace Cartridge
- Replace PC Kit
- Resetting the printer
- Resetting without replacing may affect print quality.
- Restoring Factory Defaults
- Routine maintenance needed
- Standard Bin Full
- Stopping
- Submitting selection
- Too many failed panel logins
- Tray <x> disabled
- Tray <x> Missing
- USB/USB <x>
- Waiting, too many events … DO NOT POWER OFF
- 30.yy Invalid refill, change cartridge
- 31.yy Replace defective or missing cartridge
- 32.yy Cartridge part number unsupported by device
- 34 Short paper
- 35 Insufficient memory to support Resource Save feature
- 37 Insufficient memory for Flash Memory Defragment operation
- 37 Insufficient memory to collate job
- 37 Insufficient memory, some Held Jobs were deleted
- 38 Memory full
- 39 Complex page, some data may not have printed
- 42.xy Cartridge region mismatch
- 50 PPDS font error
- 51 Defective flash detected
- 52 Not enough free space in flash memory for resources
- 53 Unformatted flash detected
- 54 Standard network software error
- 56 Standard parallel port disabled
- 56 Standard USB port disabled
- 58 Too many flash options installed
- 80 Routine maintenance needed
- 84 PC Kit life warning
- 84 Replace PC Kit
- 88.yy Cartridge is low
- 88.yy Cartridge nearly low
- 88.yy Replace cartridge
- 200.yy Paper jam
- 201.yy Paper jam
- 202.yy Paper jam
- 231.yy Paper jam
- 233.yy Paper jam
- 234.yy Paper jam
- 235.yy Paper jam
- 24x.yy Paper jam
- 251.yy Paper jam
- 900–999 Service <message>
- 1565 Emulation error, load emulation option
- List of status and error messages
- Maintaining the printer
- Administrative support
- Finding advanced networking and administrator information
- Using the Embedded Web Server
- Checking the virtual display
- Checking the device status
- Viewing reports
- Configuring supply notifications
- Modifying confidential print settings
- Adjusting Power Saver
- Setting up e-mail alerts
- Restoring the factory default settings
- Troubleshooting
- Solving basic printer problems
- Printer control panel display is blank or displays only diamonds
- Solving printing problems
- Jobs do not print
- Confidential and other held jobs do not print
- Multiple-language PDFs do not print
- Job takes longer than expected to print
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Envelope seals when printing
- Solving option problems
- Solving paper feed problems
- Solving print quality problems
- Isolating print quality problems
- Blank pages
- Characters have jagged or uneven edges
- Clipped images
- Gray background
- Ghost images
- Incorrect margins
- Paper curl
- Print is too dark
- Print is too light
- Skewed print
- Toner fog or background shading appears on the page
- Toner rubs off
- Toner specks
- Transparency print quality is poor
- Streaked horizontal lines
- Streaked vertical lines
- Solid black or white streaks appear on transparencies or paper
- Embedded Web Server does not open
- Contacting Customer Support
- Notices
- Product information
- Edition notice
- UNITED STATES GOVERNMENT RIGHTS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- European Community (EC) directives conformity
- Exposure to radio frequency radiation
- Industry Canada notice
- European Community (EC) directives conformity statement for radio products
- Noise emission levels
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Static sensitivity notice
- ENERGY STAR
- Laser notice
- Laser advisory label
- Power consumption
- Statement of Limited Warranty
- LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
- Index