Lg Gsa H55N Owner S Manual H55L.55N_QSG 1011V

: Lg Lg-Gsa-H55N-Owner-S-Manual lg-gsa-h55n-owner-s-manual lg pdf

Open the PDF directly: View PDF .
Page Count: 4

Before installing the drive, turn off

the system power.

Disconnect the power cord,

and remove the cover.

• Remove a vacant 5.25” drive bay panel from

the computer. Slide the drive into the drive

bay.

Set the jumper on the rear of

the drive as necessary.

A. When using a Primary IDE port

If you need to connect your drive to the same

primary IDE channel as the hard drive, the drive

should be set to SLAVE position.

B. When using a Secondary IDE port

❶ If there is no device connected to the

secondary IDE channel, connect the

drive to this channel and set the jumper

to MASTER.

❷ When two drives are connected, set one

drive to MASTER and the other drive to

SLAVE. If your operating system encounters

interface problems after installing the new

drive, try swapping the jumpers or move

one drive to another IDE channel.

Installing the Drive

Method A

Method B

DIGITALANALOG

INTERFACE POWER

DRCSM

SLA

GL

G39

1

+5+12

GND

40

2

AUDIOA

UDIO

Super Multi DVD Rewriter

Super Multi DVD Rewriter

DIGITALANALOG

INTERFACE POWER

DRCSM

SLA

GL

G39

1

+5+12

GND

40

2

AUDIOA

UDIO

Super Multi DVD Rewriter

DIGITALANALOG

INTERFACE POWER

DRCSM

SLA

GL

G39

1

+5+12

GND

40

2

AUDIO AUDIO

DIGITALANALOG

INTERFACE POWER

DRCSM

SLA

GL

G39

1

+5+12

GND

40

2

AUDIO AUDIO

First Drive

Second Recorder

Super Multi DVD Rewriter

Super Multi DVD Rewriter

Connect the IDE data

cable/DC power cable

to the drive.

❶ Connect the IDE data cable to the back of

the drive.

* Using a 40-pin IDE cable might bring the '04/08/03

error (LOGICAL UNIT COMMUNICATION CRC

ERROR (ULTRA-DMA/32))'.

In this case, substitute to 80-pin type IDE cable is

highly recommended.

This kind of error is hardly detected from some

specific motherboard.

❷ Connect a 4-pin power supply cable from

the computer to the drive.

Replace the cover,

connect the power cord

and restart your computer.

• Your computer configuration may different

from the illustrations.

IDE Cable DC Power Cable

❶ IDE Cable

Reserved ❷DC Power

Cable

Features

• Enhanced-IDE (ATAPI) interface.

• Power tray loading and ejection of disc.

(The disc can also be ejected manually.)

• Combination CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW,

DVD+R DL, DVD-RAM functions into one drive.

• Supports Region playback control Phase II.

• Automatic buffer underrun error prevention technology.

• Support SecurDiscTM Technology.

• Supports LightScribe Direct Label Printing Technology -

*Optional.

* You can use a variety of Drive

Package Items

System Environment

Computer

This unit can be operated in the system environment explained here.

* Compatibility problem in write/read function may occur with media depending on the media

manufacturing quality.

*

For DVD±R 20x support media: Mitsubishi Kagaku Media, Taiyo Yuden are recommended.

* Upon the media condition or some of user’s enviroment the maximum speed sometimes could not

be guarantee.

Specifications

CPU: Pentium III 1.0GHz (Recommanded system

requirements for optimal performance, CPU: Pentium IV

2.4GHz or faster, Memory: 512MB or greater)

128MB or greater.

20GB or more free space. (The free space needed for

writing depends on the quantity of data.)

Enhanced-IDE interface (as Primary Slave, Secondary

Master or Slave)

5.25-inch half-height bay required

+5V/+12V power socket required

Windows Vista/Windows 2000 Professional/

XP(Home Edition/Professional),

Direct X 9.0 or Higher is required.

CD-R : LG, Mitsubishi Kagaku Media, Verbatim, That’s,

TDK, Ritek or HP discs are recommended.

CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are

recommended.

DVD-R : Mitsubishi Kagaku Media, Maxell, That’s are

recommended.

DVD-RW : Victor. JVC, Mitsubishi Kagaku Media, TDK are

recommended.

DVD+R : Mitsubishi Kagaku Media, That’s, Maxell are

recommended.

DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are

recommended.

DVD±R DL :

Mitsubishi Kagaku Media, Verbatim are recommended.

DVD-RAM :

Maxell, Mitsubishi Kagaku Media are recommended.

System

requirements

VGA Card Memory

Hard disk

Interface

Drive bay

Power

Software Required

OS

CD-R, CD-RW,

DVD-R, DVD-RW,

DVD+R, DVD+RW,

DVD±R DL,

DVD-RAM media

Software

Install the supplied CD/DVD Recording Authoring Software before using this unit.

* Please uninstall any previous CD burning software you may have loaded on your PC

in order to prevent possible compatibility issues.

Once you have installed the supplied software, you may (if you wish) begin to reinstall

previous software, taking note for errors.

Please visit www.lgservice.com and install the program,

“LG ODD Online F/W update.” By using the program,

you can automatically check the latest information about FirmWares and

update the FirmWare.

Worldwide support ; http://www.LGservice.com

Worldwide corporate site : http://www.LGE.com

❋

The drive’s appearance and specifications may change without prior notice.

Items

General

Host Interface E-IDE/ATAPI

Supported Discs DVD-ROM(Single/Dual), DVD-RW, DVD-R, DVD-R

DL, DVD+RW, DVD+R, DVD+R DL, DVD-RAM,

CD-Digital Audio & CD-Extra, CD-Plus, CD-ROM,

CD-ROM XA-Ready, CD-I FMV, CD-TEXT,

CD-Bridge, CD-R, CD-RW, Photo-CD (Single &

Multi-Session), Video CD, DVD-Video

Supported CD-R, CD-RW, DVD+R, DVD+RW, DVD-R,

SecureDiscs DVD-RW, DVD+R DL, DVD-R DL, DVD-RAM

Disc Diameter 12cm/ 8cm

(8cm disc can be used only with drive placed horizontally.)

Mounting direction

Horizontal/Vertical

Read/Write Speed

Write : (CD-R) : 16X, 24X, 40X, 48X

(CD-RW) : 4X, 10X, 16X, 24X, 32X

(DVD-R) : 2X, 4X, 8X, 12X, 16X, 18X, 20X

(DVD-RW) : 1X, 2X, 4X, 6X

(DVD+R) : 2.4X, 4X, 8X, 12X, 16X, 18X, 20X

(DVD+RW) : 2.4X, 4X, 6X, 8X

(DVD-RAM): 2X, 3X, 5X, 6X, 8X, 12X (Ver. 2.0 & higher)

(DVD+R DL): 2.4X, 4X, 6X, 8X, 10X

(DVD-R DL): 4X, 6X, 8X, 10X

Read : (CD-ROM/R) : 48X max

(CD-RW) : 40X max

(DVD-ROM)(Single/Dual) :16X/12X max

(DVD+/-RW) : 12X max

(DVD+/-R) : 16X max

(DVD-VIDEO) : 8X max

(DVD+R DL): 12X max

(DVD-R DL): 12X max

(DVD-RAM): 12X max

Items

Performance

Data transfer rate

*Sustained CD-ROM : 7200 Kbytes/s (48X max)

DVD-ROM : 22160 Kbytes/s (16X max)

*Burst(ATAPI)

16.6 Mbytes/s (PIO Mode 4), (MULTI-DMA Mode 2)

66.6 Mbytes/s (Ultra-DMA Mode 4)

Average Access CD-ROM: 120msec (Typical)

DVD-ROM : 140msec (Typical)

Buffer capacity 2 Mbytes

MTBF 125,000 Power On Hours (Duty Cycle 10%)

Environmental

Level

When operating Temperature: 5 °C to 45 °C

Humidity: 10% to 80% R.H.

When not operating

Temperature: -30 °C to 60 °C

Humidity: 10% to 90% R.H.

Electrical

Power

DC 5V, DC 12V

Item Quantity

- Internal Super Multi DVD Rewriter 1

- Recording & Authoring Software

[Nero, InCD, Power Producer,

MPEG-2 Software (PowerDVD)] 1

- Quick Set-up Guide for Drive 1

Quick Set-up Guide Super Multi DVD Rewriter GSA-H55N

GSA-H55L

To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive,

please refer to the CD manual.

P/NO. 3828HN1011V Ver. 2

Time (

1/3Stroke

)

GSA-H55L GSA-H55N

LightScribe Supported Not Supported

* For Optimal 18x, 20x writing, 80 pin E-IDE cable and Pentium IV 2.4GHz or faster

are recommended.

* For more

SecurDisc information, visit http://www.securdisc.net

Safety Instructions

Ce produit a été fabriqué conformément aux prescriptions EEC DIRECTIVE

89/336/EEC, 93/68/EEC et 2006/95/EC.

Questo prodotto risponde alle direttive CEE 89/336, 93/68 e 2006/95/EC,

relative alla compatibilità elettromagnetica.

Este producto ha sido fabricado cumpliendo los requisitos sobre interferencias

de radio de la DIRECTIVAS CEE 89/336/CEE, 93/68/CEE y 2006/95/EC.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

CLASE 1 PRODUCTO LÁSER

CLASSE 1 PRODOTTO LASER

CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID EXPOSURE TO THE BEAM.

ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED

ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING.

ADVARSEL : KLASSE 3B SYNLING OG USYNLIG LASERSTRÅLING

NÅR

DEKSEL ÅPENS. UNNGÅ EKSPONERING FOR STRÅLEN.

VARNING : KLASSE 3B SYNLING OCH OSYNLIG LASERSTRÅLNING

NÄR DENNAL DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.

VARO! : KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET

ALTTIINA LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEN.

Dieses Produkt erfüllt die Funkstörungsanforderungen folgender Normen:

89/336/EEC, 93/68/EEC und 2006/95/EC.

This product is manufactured to comply with the radio interference

requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 2006/95/EC.

The appliance is not intended for use by young children or infirm persons

without supervision.

■Microsoft®and Windows®are trademarks registered in the United

States and other countries by the Microsoft Corporation.

■The company names and product names written in this manual are

trademarks or registered trademarks of the respective companies.

Industry Canada requirement

This class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003

du Canada.

FCC COMPLIANCE STATEMENT

Note :This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an Authorized Service Center for help.

• FCC WARNING

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.

• This Super Multi DVD Rewriter is for use only with UL listed personal

computers that have installation instructions detailing user-installation

of card cage accessory.

CAUTION: The laser used in the Super Multi DVD Rewriter can dam-

age your eyes. Do not attempt to open the cover. To reduce the risk of

electric shock, do not remove the cover (or back).

There are no user-serviceable parts inside. Refer servicing to qualified

service personnel. Use of controls or performance of procedures other

than those specified herein may result in hazardous radiation exposure.

WARNING: To reduce the risk of fire or electric shock, do not expose

this appliance to rain or moisture.

VORSICHT : Der in diesem Super Multi DVD-Laufwerk benutzte Laser

kann Ihre Augen schädigen. Versuchen Sie keinesfalls, die Abdeckung

zu öffnen. Um die Gefahr eines elektrischen Schocks zu reduzieren,

sollten Sie die Abdeckung (oder Rückseite) keinesfalls

entfernen. Im Inneren des Geräts befinden sich keine Teile, die vom

Benutzer selbst gewartet werden können. Überlassen Sie die Wartung

qualifizierten Kundendiensttechnikern. Beachten Sie bei der Benutzung

von Bedienelementen und der Durchführung von Prozeduren unbedingt

die Anweisungen dieses Handbuchs, da andernfalls gefährliche

Strahlung freigesetzt werden kann.

WARNUNG : Setzen Sie das Laufwerk keinesfalls Regen oder

Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen

Schocks zu reduzieren.

ATTENTION: Le faisceau laser utilisé dans ce lecteur/graveur de

Super Multi DVD est dangereux pour les yeux. Ne pas tenter d’ouvrir le

couvercle. Ne déposer ni la façade, ni le panneau arrière (risque

d’électrocution). Aucun élément interne n’est réparable par l’utilisateur.

L’utilisation de commandes ainsi que l’exécution de procédures autres

que celles spécifiées dans le présent guide risque de provoquer une

dangereuse exposition aux radiations.

AVERTISSEMENT :Ne pas exposer ce matériel à la pluie ou à

l’humidité (risques d’incendie et d’électrocution).

PERICOLO : Il dispositivo di lettura e scrittura utilizzato in questo

masterizzatore utilizza un raggio laser che, se osservato da vicino, può

danneggiare la vista. Evitare di smontare il coperchio dell’apparecchio.

Al fine di prevenire eventuali folgorazioni, evitare di smontare

l’apparecchio. All’interno dell’apparecchio non sono presenti parti che

richiedono manutenzione da parte dell’utente. In caso di difetti o

guasti, rivolgersi ad un Centro di Assistenza Tecnica. L’esecuzione di

procedure diverse da quella espressamente indicate in questo manuale

può provocare pericolose esposizioni alle radiazioni laser.

ATTENZIONE: Al fine di evitare cortocircuiti o principi di incendio,

evitare di esporre questo apparecchio alla pioggia o ad una eccessiva

umidità ambientale.

PRECAUCION: El láser utilizado en la unidad Super Multi DVD puede

dañar sus ojos. No intente abrir la tapa. Para reducir el riesgo de

descarga eléctrica, no quite la tapa (ni la parte posterior).

No hay piezas internas que deba mantener el usuario.

El servicio de mantenimiento debe efectuarlo personal técnico cualificado.

El uso de controles o la ejecución de procedimientos distintos de los

especificados en este manual pueden ser causa de exposición a

radiación peligrosa.

ADVERTENCIA: Para reducir el riesgo de fuego o descarga eléctrica,

no exponga este aparato a la lluvia ni a la humedad.

CUIDADO: O laser usado no drive Super Multi DVD pode danificar

seus olhos.Não tente levantar a tampa. Para reduzir o risco de choque

elétrico, não retire a tampa ou a parte traseira.

No seu interior, não há partes a serem manuseadas pelo usuário.

Consertos ou manutenção devem ser feitos somente pelo Serviço

Autorizado LG. O uso dos controles ou a execução de procedimentos

diferentes que não sejam os especificados neste manual podem

resultar em exposição perigosa à radiação.

AVISO: Para reduzir o risco de incêndio ou choque elétrico não

exponha este aparelho á chuva ou humidade.