Li Seng Technology LSN8001 Bluetooth LE Module User Manual PowerPoint Presentation

Download:
Mirror Download [FCC.gov]
Document ID	1881859
Application ID	ynlIlhEw5ZKcONOjH/vePA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	225.86kB (2823306 bits)
Date Submitted	2013-01-18 00:00:00
Date Available	2013-01-18 00:00:00
Creation Date	2013-01-07 11:47:59
Producing Software	Microsoft® Office PowerPoint® 2007
Document Lastmod	2013-01-18 10:16:05
Document Title	PowerPoint Presentation
Document Creator	Microsoft® Office PowerPoint® 2007
Document Author:	Danny

Module : LSN8001
FCC Qualification Application to
MOST
by Li Seng Technology Ltd.
Rev 1.1 Jan-2013
2013/1/7
Aims & Content
Content :
User Manual / User Guide
FCC Statement
Label of End Product
User Manual of End Product
Overiew
Functional Block Diagram
Technical Description
Circuit Schematics
PCB Layout & Component Layouts
Part List
User Manual / User Guide (1/4)
Parts Description & Before Installation :
! : Antenna
Protection Cap :
Remove before
Test
! : Side Switch Setting
> RS232  ON
> S8  VBUS
> S9  OFF
> Power Source (Banana
Plug) : 4.5V DC
! : Connection Socket
Position
Li Seng Bluetooth
BLE Module
LSN8001 x2
Adaptor
Board
nRF2735 x1
Mother Board
nRF6310 x1
Tx / Rx
Cable x1
User Manual / User Guide (2/4)
Installation :
Finished Assembly
1) Place the “Adaptor Board
nRF2735”
on
“Mother Board nRF 6310”
2) Place the “Li Seng Bluetooth
BLE Module LSN8001”
on
“Adaptor Board nRF2735”
Remove “Antenna Protection
Cap” and Connect to Testing
Equipment
3) Connect “Tx/Rx cable”
on
“Li Seng Bluetooth BLE
Module LSN8001”
4) Connect “Tx/Rx cable”
on
“Mother Board nRF6310”
User Manual / User Guide (3/4)
Installation :
5) Connect Power Source by
“Banana Plug” 4.5V DC
(Beware of + & - )
7 The Unit is Ready
for Testing
6) Power On the Unit by
Power ON Silde Switch S9
Power OFF the unit by Switch OFF
the Slide Switch S9 after Testing
User Manual / User Guide (4/4)
Direct Test Mode :
The DTM RS232 interface :
Baud Rate : 192000
Number of data bits : 8
No Parity
1 Stop bit
No flow control (meaning no RTS/CTS)
FCC statement :
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority
to operate the equipment.
Label Of The End Product :
The final end product must be labeled in a visible area with the following " Contains TX
FCC ID: RR3-LSN8001 ". If the size of the end product is larger than 8x10cm, then the
following FCC part 15.19 statement has to also be available on the label: This device
complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Overview
LSN8001 Module Apply to Bluetooth Low Energy (4.0) as Bluetooth Smart.
Electrical Data Reference of LSN8001 Module
LSN8001
Module Supply Power : 1.9V to 3.6 V DC
LSN8001
Technical Description
Module Dimension : 33 x 23 x 3 (15.0)mm
PCB & Components Layout
Front
Rear
Part List
Bill of material
PCB:
Version:
LSN8001
1.0
Designator
C1, C2, C13, C14
C3
C4
C5
C6
Value
15pF
2.2nF
NA
1.8pF
1.2pF
0402s
0402s
0402s
0402s
0402s
Description
Capacitor
Capacitor
Capacitor
Capacitor
Capacitor
C7, C9
C8
C10, C12
C11
C15
L1
L2
L3
1.0µF
1.0nF
100nF
33nF
1.5pF
8.2nH
5.6nH
3.9nH
0603s
0402s
0402s
0402s
0402s
0402s
0402s
0402s
Capacitor
Capacitor
Capacitor
Capacitor
Capacitor
Inductor
Inductor
Inductor
L4
L5
10µH
15nH
0603s
0402s
P1
P2
R1
22k
U1
nRF8001
X1
16MHz
X2
32.768kHz
Footprint
Comment
Quanti
Farnell part
ty
Digi-Key part number
number
1650788
NP0 +/- 2%
X7R +/- 10%
Not mounted
NP0 +/-0.1pF
NP0 +/-0.1pF
X7R +/- 10%,TAIYO YUDEN LMK107B7105KA-T
X7R +/- 10%
X7R +/- 10%
X7R +/- 10%
NP0 +/-0.1pF
+/-5%, Murata LQP15MN8N2B02D
+/-5%, Murata LQP15MN5N6B02D
+/-5%, Murata LQP15MN3N9B02D
IDC,min = 50mA, +/-20%, TAIYO YUDEN LBMF1608T100K
+/-10%, TAIYO YUDEN - HK100515NJ-T
Inductor
Inductor
Header, 5-Pin, Dual
row, B=5.8mm,
Fisher Elektronik, SL2/53/72G 2x36-pin
HDR2x5 - small
A=5.3mm
2.54mm
HDR1X2
Header, 2-Pin
UART
0402s
Resistor
1%
2.4GHz Single chip
Nordic_QFN50P500X500X Bluetooth low
90-33N
energy
QFN32 5x5
Epson-Toyocom TSX-3225, 16MHz,
Cl=9pF, Total tolerance (at 25ºC + temp.
drift + aging) = ±50ppm max, ESR=100Ω
max, C0=7pF max, Operating
3.2 x 2.5 mm
Crystal
temperature range = -20ºC to +70ºC min.
FC-135, 32.768kHz, Cl=9pF, Frequency
toleranse = ±20ppm, Operating
3.2 x 1.5 mm
Crystal
temperature range = -20ºC to +70ºC min.
587-1242-1-ND
1683674
587-1714-1-ND
587-1521-1-ND
178-6105
6581328
1278037
Thank You ~!
Further contact :
Danny Tsang
danny@liseng.com.hk
Hong Kong office:
Address: 9/F, Shiu Fung Hong Building, 239-241 Wing Lok Street, Sheung Wan, Hong Kong
Cellphone : (852) 9430-7943
Main : (852) 2540-8348
Fax : (852) 2547-5706
2013/1/7
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2013:01:07 11:47:59+08:00
Creator Tool                    : Microsoft® Office PowerPoint® 2007
Modify Date                     : 2013:01:18 10:16:05+07:00
Metadata Date                   : 2013:01:18 10:16:05+07:00
Format                          : application/pdf
Creator                         : Danny
Title                           : PowerPoint Presentation
Producer                        : Microsoft® Office PowerPoint® 2007
Document ID                     : uuid:76eb4681-80f4-485f-8c75-5fd50a3e7450
Instance ID                     : uuid:f5bae041-8050-444c-882f-277f2d267315
Has XFA                         : No
Page Count                      : 14
Language                        : zh-TW
Author                          : Danny

EXIF Metadata provided by EXIF.tools