Liebert Process Fluid Chiller Ps096A Users Manual PETNETplain

PS096A to the manual 46979598-8ef0-4ced-bf73-8bd23d97fb6c

: Liebert Liebert-Process-Fluid-Chiller-Ps096A-Users-Manual-571451 liebert-process-fluid-chiller-ps096a-users-manual-571451 liebert pdf

Open the PDF directly: View PDF .
Page Count: 2

Process Fluid Chiller Designed for CTI PETNet Cyclotron 1

Keeping Business in Business

Process Fluid Chiller

Designed for CTI PETNet Cyclotron

• Dedicated, equipment-matched cooling supplies the proper temperature and water flow year round.

• Factory-tested, piped, wired and charged for hassle-free startup and operation.

• Clean, non-ferrous cooling loop, required for sensitive medical equipment.

• Local service and parts for quick and knowledgeable maintenance and service.

• Optional switch-over to alternate water source provides redundant, continuous operation.

• Optional remote monitoring systems keep you informed of chiller operation.

• UL/CSA listing on standard models.

• ISO 9001 certified company.

PETNet Cyclotron Specifications

Fluid Specified Water

Heat Dissipation—BTUH (kW) 60,000 (17.6)

Fluid Temperature Range—°F (°C) 40-50 (4.4-10)

Fluid Flow Rate—GPM (l/m) 10 (38)

Fluid Pressure Drop—PSI (kPa) 5 (34)

Note: Performance is based on 95°F condenser ambient.

Process Fluid Chiller Specifications

Model Number PS096A PS096A

Fluid Circulated Ethylene Glycol Propylene Glycol

Net Cooling Capacity—BTUH (kW) 72,400 (21.2) 68,200 (20)

Leaving Fluid Temperature—°F (°C) 45 (7.2) 45 (7.2)

Fluid Flow Rate—GPM (l/m) 10 (38) 10 (38)

PETNet Cyclotron Pressure Drop—PSI (kPa) 5 (34) 5 (34)

Chiller Pressure Drop—PSI (kPa) 6.6 (45) 8.0 (54.5)

Pump Total Head—PSI (kPa) 65 (448) 65 (448)

Head Available for Piping Circuit—PSI (kPa) 53.4 (369) 52.0 (360)

Pump HP (kW) 3 (2.2) 3 (2.2)

Based on Siemens specification dated 07/97

Process Fluid Chiller Designed for CTI PETNet Cyclotron 2

1050 Dearborn Drive

P.O. Box 29186

Columbus, OH 43229

Phone: 800.877.9222

Fax: 614.841.6022

Via Leonardo Da Vinci 8

Zona Industriale Tognana

35028 Piove Di Sacco

Italy

Phone: 39.049.9719.111

Fax: 39.049.5841257

23/F Allied Kajima Bldg.

138 Gloucester Road

Wanchai

Hong Kong

Phone: 852.2.572.2201

Fax: 852.2.572.1182

©2000 Liebert Corporation. All rights

reserved throughout the world.

Specifications subject to change without

notice.

®Liebert and the Liebert logo are

registered trademarks of Liebert

Corporation. All names referred to are

trademarks or regisered trademarks of

their respective owners.

Model

No.

A-Width

in. (mm)

B-Height

in. (mm)

C-Depth

in. (mm) D

Weight

lbs. (kg) Voltage (60 Hz)

PS096A 77 (1956) 69.25 (1759) 38.5 (978) 5.5 (140) 750 (340) 460, 3-phase; 208/230, 3-phase

PS120A 77 (1956) 69.25 (1759) 38.5 (978) 5.5 (140) 750 (340) 460, 3-phase; 208/230, 3-phase

Standard Features

• Indoor/outdoor cabinet

• Hermetic compressor

• Refrigerant dehydrator

• Expansion valve

• Refrigerant receiver

• Stainless steel fluid reservoir expansion tank

• Pressure relief valve

• Hot gas bypass valve capacity control

• Stainless steel pump

Optional Features

• Refrigerant gauges and reservoir heater

Suggested Options (may not be required)

• EWB15W—Indoor wallbox with fluid filter, flow

meter, temperature gauges, shut-off/ball valves

and 1" hose barbs.

Accessories

• Emergency water bypass

• Enviro-source emergency bypass

• Water level control and alarm system

•Fluid pressure gauge

•Check valve

• Dial thermometer

• Relief valve

• Circuit setter

• Ball valve

• High temperature thermostat

• Low flow switch

• Liebert RCM8 monitor

Required Options

• 100 gallon stainless steel storage tank built into

chiller frame

Liebert Web Site—http://www.liebert.com

SL-16543 (03/01)