Lierda Science and Technology Group LSD1BTSTBLEPCB BlueNRG-A BLE Module User Manual LSD1BT STBLEPCB manual V05 180118
Lierda Science & Technology Group Co.,Ltd BlueNRG-A BLE Module LSD1BT STBLEPCB manual V05 180118
LSD1BT-STBLEPCB_manual_V05_180118
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3719223 |
| Application ID | K2Q2t5dXPhcBx6QvIpU6lw== |
| Document Description | LSD1BT-STBLEPCB_manual_V05_180118 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 33.81kB (422567 bits) |
| Date Submitted | 2018-01-19 00:00:00 |
| Date Available | 2018-01-19 00:00:00 |
| Creation Date | 2018-01-18 16:05:41 |
| Producing Software | ç¦æ˜•é˜…读器打å°æœºç‰ˆæœ¬8.3.1.0522 |
| Document Lastmod | 2018-01-18 16:07:50 |
| Document Title | LSD1BT-STBLEPCB_manual_V05_180118 |
利尔达科技集团股份有限公司 LIERDA SCIENCE & TECHNOLOGY GROP CO.,LTD LSD1BT-STBLEPCB Product manual Product Name: BlueNRG-A Bluetooth module PCBA P/N: LSD1BT-STBLEPCB Document version: V4.0 Revision history Product BlueNRG-A Name Bluetooth module Product Type LSD1BT-STBLEPCB 20170726 PCBA Editor Qiumg Date No. Revision record Modifier Initial release Add descriptions of Auditor Versions Date Liuzh V1.0 20161012 Liuzh V1.1 20161210 Marco Qiu V2.0 20170726 Marco Qiu V3.0 20171225 Marco Qiu V4.0 20180108 Marco Qiu V5.0 20180118 product information; Modify partial data; Add figure comments The module power is divided into BAT1 and BAT2 in pin definition Add FCC&CE Information Information Part Number Description The PN is pure hardware without shield or any LSD1BT-STBLEPCB firmware. Please contact us if there is other requirements for second development of end users. -- -- Package Size 13mm*10mm*2.3mm -- The Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Contents 1 Features .......................................................................................................................................................... 5 2 Specifications ................................................................................................................................................. 6 3 Hardware ........................................................................................................................................................ 7 3.1 Dimensions Diagram ........................................................................................................................... 7 3.2 Pin Description .................................................................................................................................... 8 4 Applications.................................................................................................................................................... 9 4.1 Application circuit ............................................................................................................................... 9 4.2 Precautions ........................................................................................................................................ 10 4.3 Download and Debug ........................................................................................................................ 10 4.4 Development board ........................................................................................................................... 10 4.5 Reference manual .............................................................................................................................. 10 5 Federal Communications Commission (FCC) Interference Statement ......................................................... 11 Note ................................................................................................................................................................. 12 1 Features The low-power Bluetooth module is a high-performance Bluetooth SOC solution based on ST's BLUENRG-134 chip, which is a compact, practical and convenient, high integration module with stamp-type interface. The module provides a complete wireless solution and perfect support for customers application development, saving the trouble of complicated RF hardware design, development and production. With modular ceramic antenna, the product has the feature of low power consumption, small size, anti-interference ability and etc.. High performance 32M and 32.768K Crystal 160K Flash /24-KB RAM 32-bit, ARM® Cortex®-M0 Support for 14 GPIOs BLE SOC 13mm*10mm 2 Specifications Table1: Module Parameters Parameters performance Working voltage 1.7V~3.6V Working -40℃~85℃ Note temperature range Frequency range 2400MHz~2483.5MHz Modulation scheme GFSK RF channel center 2402M--2480M(Ch0 -- Ch39) Channel spacing 2M Tx Power 8--10dBm Typical value 9dBm Tx current 8.6mA Typical value 8.6mA @3.3V frequency 0 dBm Rx current 8.1mA Sensitivity -84dBm Power consumption Transmission Typical value 8.1mA @3.3V Sleep mode 0.9uA 32 kHz XO Sleep mode 2.1uA 32 kHZ RO Standby mode 500nA Standby >15m See Notes 13mm*10mm*2.3mm Length * width * height distance(Open area and 0dBm) Dimensions Antenna Antenna Type Multilayer Chip Antenna Average Gain (XZ-V) -0.5 dBi typ Dimensions ( L × W ) 3.2× 1.6 mm Peak Gain 0.5 dBi typ Notes: "Transmission distance" is subject to surrounding environment, air humidity and other factors, for reference only. 3 Hardware 3.1 Dimensions Diagram Figure 1: Dimensions Diagram Figure 2: Pin Diagram 3.2 Pin Description Pin Number Pin Name Type Description GND ADC2 GPIO ADC2 DIO4 GPIO UART_RXD DIO8 GPIO UART_TXD DIO14 GPIO I2C1_CLK ADC1 GPIO ADC1 RESETN Reset Pin GND Ground reference BAT1 Power 1.7~3.6V 10 DIO0 GPIO UART_CTS 11 DIO1 GPIO UART_RTS 12 DIO2 GPIO PWM0 13 DIO3 GPIO PWM1 14 DIO6 GPIO UART_RTS 15 DIO9 GPIO SWCLK 16 DIO10 GPIO SWDIO 17 DIO5 GPIO UART_TXD 18 SMPSFILT2 GPIO DC-DC 19 SMPSFILT1 GPIO DC-DC 20 DIO12 GPIO I2C1_CLK 21 DIO7 GPIO I2C2_DAT 22 DIO11 GPIO UART_RXD 23 BAT2 Power 1.7~3.6V 24 GND Ground reference Ground reference For more details, refer to BlueNRG-1DataSheet. .http://www.st.com/content/ccc/resource/technical/document/datasheet/group3/ac/c1/ad/80/54/fa/49/9d/DM0 0262983/files/DM00262983.pdf/jcr:content/translations/en.DM00262983.pdf 4 Applications 4.1 Application circuit Active DC-DC Converter： Figure 3: Application circuit: active DC-DC converter Non-active DC-DC Converter: Figure 4: Application circuit: non active DC-DC converter Active DC-DC Converter will greatly reduce system power consumption, but will affect sensitivity of the system. Using an internal LDO increases sensitivity, but system power consumption will be slightly higher. 4.2 Precautions To ensure the module's RF performance in the application of its maximum possible effectiveness, the user should follow the following principles: 1. It is recommended to supply the module with DC power supply. The power supply ripple coefficient should be as small as possible. The module should be reliably grounded. Please pay attention to the correct connection of positive and negative poles of the power supply. If the connection is reversed, the module may be damaged permanently. 2. Module recommendations placed on the edge of the floor open space, the antenna should be outward; 3. The module under the antenna PCB (double-sided board and multi-layer board) need clearance, can not be deposited copper, that is all the layout layer below the antenna can not have grounding or signal trace; 4. It is better to keep metal parts away from the antenna, or module communication distance in different environments will be shortened at different degrees. Please refer to recommended locations in following figure: Figure4: Module recommended placement 4.3 Download and Debug The module supports the ARM serial wire debug (SWD) port, the SWD port pin is DIO9(SWCLK),DIO10(SWDIO).Through J-link or ST-LINK, you can download and debug. When the module is power up or hardware reset, if DIO7 is high, you can enter the boot mode, the module is not available at this time, the module can be programmed through the serial port code. 4.4 Development board Refer to LSD1RF-EVBGP001 data. 4.5 Reference manual 10 BlueNRG-1_GATT_database_size.pdf BlueNRG-1_Over_The_Air_Bootloader.pdf BlueNRG-1_UART_bootloader_protocol.pdf PM0257-BlueNRG-1 BLE stack programming guidelines.pdf AN4820-BlueNRG-1 low power modes.p 5 Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 11 Note Welcome to use Lierda products, please read this notice before using our products. If you have already used them, it means that you have read and accepted this notice. Lierda reserves the right to interpret and modify all information contained herein without prior notice. Released by：Lierda MSBU 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 12 Has XFA : No Creator : Title : Description : Subject : Creator Tool : Producer : 福昕阅读器打印机版本8.3.1.0522 Keywords : Create Date : 2018:01:18 16:05:41+08:00 Modify Date : 2018:01:18 16:07:50+08:00 Author :EXIF Metadata provided by EXIF.tools