Life Fitness G5 Cable Motion Users Manual LFG5 002_G5
G5 CABLE MOTION to the manual 198764ea-0bd2-42cb-b8d4-492c99943f51
2015-01-21
: Life-Fitness Life-Fitness-G5-Cable-Motion-Users-Manual-353831 life-fitness-g5-cable-motion-users-manual-353831 life-fitness pdf
Open the PDF directly: View PDF 
.
Page Count: 21
| Download | |
| Open PDF In Browser | View PDF |
G5 CABLE MOTION™ GYM SYSTEM USER GUIDE WARNING: Read and follow all directions for each step to insure proper assembly of this product. CLASS H PART # 8289201 REV. A VERSION: LFG5-003 DATE: 08-16-07 TABLE OF CONTENTS Safety Statement . . . . . . . . . . . . . . . .2 Assembly Instructions . . . . . . . . . . . . . .7 Gym Dimensions. . . . . . . . . . . . . . . . .3 General Maintenance . . . . . . . . . . . . . .19 Components List . . . . . . . . . . . . . . . . .4 Warranty Statement/Notes . . . . . . . . . .20 Hardware . . . . . . . . . . . . . . . . . . . . . .6 Contact Information. . . . . . . . . . . . . . . .21 IMPORTANT SAFETY INFORMATION THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES! 1. Before using, read all the warnings and instructions on the use of this machine including the wall chart and instructional DVD. Use only for intended exercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning any exercise program. 3. Keep body and clothing free of all moving objects. 4. Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a broken or jammed machine. Notify your authorized Life Fitness dealer before use and have repairs made by an authorized service technician. 5. Be certain that weight pin is completely inserted. Use only the pin provided by the manufacturer. If unsure, call your authorized Life Fitness dealer. 6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found in this condition. DO NOT attempt to fix. Notify your authorized Life Fitness dealer. 7. Inspect cables and their connections before using machine. Pay particular attention to the cable ends. DO NOT attempt to fix. Notify your authorized Life Fitness dealer before use and have repairs made by an authorized service technician. 8. Make sure all spring loaded pull pins are fully engaged in the adjustment position before use. 9. Children and pets must not be allowed near this machine. Supervise teenagers. Please note: * Thank you for purchasing the Life Fitness G5 Cable Motion Gym System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. NOTE: In a continual effort to improve our products, specifications are subject to change. © 2007 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a trademark of Brunswick Corporation. www.LifeFitness.com 2 GYM DIMENSIONS Resistance Ratio: Machine Weight: 1:2 500 pounds 3 COMPONENTS LIST ITEM NO. 1 QTY. 1 PART NO. 8188301 DESCRIPTION FRONT UPRIGHT ASSEMBLY 2 1 8210501 FOOT PLATE WITH MATS ASSEMBLY 4 1 8349801 RIGHT UPRIGHT ASSEMBLY 5 1 8349901 LEFT UPRIGHT ASSEMBLY 6 2 8264701 GUIDE ROD ASSEMBLY 8 1 8317801 FRONT SHROUD ASSEMBLY 9 1 8317701 MOUNTING BRACKET 11 2 8264801 FLOATING PULLEYS ASSEMBLY 12 1 8262501 TOP PLATE ASSEMBLY 13 1 8344601 RIGHT BOTTOM PLATE ASSEMBLY 14 1 7963701 SELECTOR PIN, 80/20, ASSEMBLY 15 1 8288301 MAIN TOP COVER WITH INSERTS ASSEMBLY 16 1 8235801 TOP BACK COVER 17 1 8235701 TOP FRONT COVER 22 2 8264701 8264702 GUIDE ROD (Assembly) 23 2 8264301 WEIGHT STACK CUSHION 25 1 8349701 UPPER SWIVEL PULLEYS ASSEMBLY 8350601 UPPER RIGHT PULLEY ASSEMBLY 8350701 UPPER LEFT PULLEY ASSEMBLY 26 1 8350301 LOWER LEFT PULLEY ASSEMBLY 27 1 8350201 LOWER RIGHT PULLEY ASSEMBLY 28 1 8364401 SIDE TOP LEFT COVER 29 1 8364501 SIDE TOP RIGHT COVER 30 1 8344501 LEFT BOTTOM PLATE 32 1 7777301 TOUCH UP PAINT, PLT 36 2 7642301 BUMPER, CM/MJ, PLUG 37 6 7672601 QUICK CONNECT 38 2 8140701 SHORT HANDLE ASSEMBLY 39 2 8140702 MEDIUM HANDLE ASSEMBLY 40 2 8140703 7745501 LONG HANDLE ASSEMBLY 41 1 7745801 FOOT STRAP 42 2 8286101 GUIDE CABLE 43 1 8285902 UPPER CABLE (LONG) ASSEMBLY 44 2 8285901 LOWER CABLE (SHORT) ASSEMBLY 45 1 8289201 USERS GUIDE 46 15 7935301 WEIGHT PLATE, 10LB, CASTEEL 48 1 8289101 745201 49 1 8289001 DVD 50 1 8259201 BACK THIGH HOLD CLAMP 51 1 8259101 FRONT THIGH HOLD CLAMP 52 1 8263001 THIGH HOLD TUBE 53 2 7424701 SHORT ROLLER PAD 54 1 8263701 TULIP STYLE KNOB 55 1 8350001 RIGHT SUPPORT LEG 56 1 8350101 LEFT SUPPORT LEG WALL CHART Accessory Bar (Qty 1) 8288001 WEIGHT STACK LABELS (Qty. 1) 8327001 Adapter Rings (Qty 2) 7944401 4 COMPONENTS LIST HARDWARE ITEM NO. QTY. PART NO. DESCRIPTION 57 14 3102514 3/8” WASHER 58 4 3256203 M10 X 30MM SCREW 59 8 3256211 M10 X 70MM SCREW 60 4 3241313 M12 X 80MM SCREW 61 8 3102507 1/2” WASHER 62 4 3242005 M12 HEX NYLOCK NUT 63 2 3240502 M10 X 50 HEX TENSION SCREW 64 2 7634401 GUIDEROD RETAINER 65 4 3236501 M4 X 0.7MM ZINC PHILLIPS PAN HEAD 66 2 3253901 M10 X 20MM SCREW 67 2 3232421 RETAINING RING 68 4 3223401 10-32 X 3/4” PHILLIPS PAN HEAD 69 2 3241709 M6 X 60MM SCREW 70 2 3102508 1/4” WASHER 71 4 3242002 M10 HEX NYLOCK NUT 72 9 3241201 M4 ZINC PHILLIPS PAN HEAD 74 2 3226001 #6 x 3/8” (9.5mm) BLACK PHILLIPS PAN HEAD SCREW REQUIRED TOOLS * ADJUSTABLE WRENCH * EXTERNAL SNAP RING PLIERS * 4mm ALLEN WRENCH * 7mm ALLEN WRENCH * 13mm WRENCH * 17mm WRENCH * 8mm ALLEN WRENCH * 19 mm WRENCH * PHILLIPS SCREW DRIVER 5 HARDWARE: 3/8” WASHER (#57) M10 X 30MM SCREW (#58) 1/2” WASHER (#61) M10 X 70MM SCREW (#59) M12 NYLOCK NUT (#62) M10 X 20MM SCREW (#66) M12 X 80MM SCREW (#60) M10 HEX TENSION SCREW (#63) M4 LARGE HEAD ZINC PHILLIPS PAN HEAD SCREW (#65) RETAINER RING (#67) #10 x 3/4” BRONZE PHILLIPS PAN HEAD SCREW (#68) M6 x 60MM SCREW (#69) 1/4” WASHER (#70) M10 NYLOCK NUT (#71) M4 ZINC PHILLIPS PAN HEAD SCREW (#72) #6 x 3/8” BLACK PHILLIPS PAN HEAD SCREW (#74) Centimeters 6 Mid Pulley Covers - See Attached Front Cover 8317301 Rear Cover 8263501 Top Cover 8263401 STEP 1: Slide the RIGHT SUPPORT LEG (55) over the MOUNTING TUBE (A) of the RIGHT UPRIGHT (4). Loosely secure the RIGHT SUPPORT LEG (55) and RIGHT UPRIGHT (4) to the FRONT UPRIGHT (1) using two M12 x 80mm SCREWS (60), four 1/2” WASHERS (61), and two M12 HEX NYLOCK NUTS (62) as shown. With the UPPER PULLEY ASSEMBLY (25) oriented as shown, insert the UPPER PULLEY ASSEMBLY (25) into the top of the RIGHT UPRIGHT (4) and secure together the RIGHT UPRIGHT (4), FRONT UPRIGHT (1), and UPPER PULLEY ASSEMBLY (25) using two M10 x 30mm SCREWS (58) and two FLAT 3/8” WASHERS (57). Repeat the above steps to assemble the LEFT UPRIGHT (5) and LEFT SUPPORT LEG (56) to the FRONT UPRIGHT (1). NOTE: THE TOP PULLEY WELDMENT ATTACHES TO THE INSIDE OF THE UPRIGHT SIDES AND THE ORIENTATION SHOULD BE AS SHOWN. 7 STEP 2: LOOSELY attach the FOOTPLATE (2) to the RIGHT SUPPORT LEG (55) and LEFT SUPPORT LEG (56) using four M10 x 70mm SCREWS (59) and four FLAT 3/8” WASHERS (57). 8 STEP 3: Positon two WEIGHT STACK CUSHIONS (23) and GUIDE RODS (22) at the GUIDE ROD BRACKET (B) on the bottom of the FRONT UPRIGHT (1). NOTE: MAKE SURE THAT THE PLUGGED ENDS OF THE GUIDE RODS (22) ARE FACING UP. CAREFULLY slide one of the WEIGHT PLATES (46) over the top of the GUIDE RODS (22) and slowly lower the WEIGHT PLATE on to the WEIGHT STACK CUSHIONS (23). Continue stacking a total of 15 WEIGHT PLATES (46). Slide the TOP PLATE (12) over the GUIDE RODS (22) and slowly lower it onto the WEIGHT PLATES (46). Slide the WEIGHT PIN with RING (14) over the stem of the TOP PLATE (12). Thread the HEAD PLATE PULLEY ASSEMBLY (10) into the TOP PLATE (12). Slide one RETAINING RING (67) over the top of each of the GUIDE RODS (22). Thread one M10 x 50mm HEX TENSION SCREW (63) into each of the two GUIDE ROD RETAINERS (64). Do not fully thread the M10 x 50mm HEX TENSION SCREWS(63) into the GUIDE ROD RETAINERS (64). CAREFULLY slide the GUIDE ROD RETAINERS (64) into the hole under the top of the FRONT UPRIGHT (1). Make sure the M10 x 50mm HEX TENSION SCREWS (63) in the GUIDE ROD RETAINERS (64) are facing up. Push the GUIDE ROD RETAINERS (64) up high enough so that the GUIDE RODS (22) can be placed under them. Lower the GUIDE ROD RETAINERS (64) over the GUIDE RODS (22). Slide the RETAINING RINGS (67) up. Use External Snap Ring Pliers to secure the RETAINING RINGS (67) into the groove on the GUIDE ROD RETAINERS (64). Tighten all frame bolts securely. 9 STEP 4: Remove one QUICK CONNECT from the end of one UPPER (LONG) CABLE (43). Insert the end (where the QUICK CONNECT was removed) of the UPPER (LONG) CABLE (43) through the UPPER PULLEY (25) and follow routing illustration to the FLOATING PULLEY ASSEMBLY (11) through to the HEAD PLATE PULLEY ASSEMBLY (10). Continue to the other side, ending at the other UPPER PULLEY (25). Reattach the previously removed QUICK CONNECT to the end of the UPPER (LONG) CABLE (43). NOTE: THE CABLE MUST BE INSERTED BETWEEN THE PULLEY AND THE CABLE RETAINING CLIPS (C) AND MOVE FREELY. 10 ITEM 37 D E F G H QTY. 6 1 1 1 1 2 PART NO. DESCRIPTION 7872601 QUICK CONNECT ASSEMBLY 7726201 QUICK CONNECT COUPLER 7726401 QUICK CONNECT HOUSING 7726301 QUICK CONNECT SLEEVE 3249901 COMPRESSION SPRING 3250002 M5 HEX SCREWS STEP 5: Dissemble the QUICK CONNECT (37) by removing the two M5 HEX SCREWS (H) from the QUICK CONNECT COUPLER (D). Carefuly remove the COMPRESSION SPRING (G), the QUICK CONNECT SLEEVE (F) and the QUICK CONNECT HOUSING (E). Slide the QUICK CONNECT HOUSING (E), COMPRESSION SPRING (G), and QUICK CONNECT SLEEVE (F) onto the cable as shown. Insert the cable end into the QUICK CONNECT COUPLER (D). Slide the entire assembly over the QUICK CONNECT COUPLER (D). Attach the QUICK CONNECT COUPLER (D) and QUICK CONNECT HOUSING (E) together. Use the two M5 HEX SCREWS (H) to tighten. NOTE: IF NECESSARY, ENSURE THE CABLES ARE THE PROPER LENGTH AND MAKE NECESSARY ADJUSTMENTS TO THE WEIGHT STACK PULLEY (TIGHTEN OR LOOSEN). 11 STEP 6: Mount the RIGHT BOTTOM PLATE (13) and the LEFT BOTTOM PLATE (30) to the FRONT UPRIGHT (1) using two 10-32 x 3/4” PHILLIPS PAN HEAD SCREWS (68) for each plate. Place the FRONT SHROUD (8) around the FRONT UPRIGHT (1). Align the bottom mounting holes of the FRONT SHROUD (8) with the remaining mounting holes on the RIGHT BOTTOM PLATE (13) and the LEFT BOTTOM PLATE (30). Secure with one 10-32 x 3/4” PHILLIPS PAN HEAD SCREW (68) on each plate. Attach the bottom corners of the MID BACK COVER (K) to the back of the FRONT SHROUD (8) using two #6 x 3/8” (9.5mm) BLACK PHILLIPS PAN HEAD SCREWS (74). DO NOT OVERTIGHTEN SCREWS INTO PLASTIC PARTS. 12 STEP 7: Remove one QUICK CONNECT from the end of one LOWER (SHORT) CABLE (44). Insert the end (where the QUICK CONNECT was removed) of the the LOWER (SHORT) CABLE (44) through the LOWER RIGHT PULLEY (27) and through the access hole in the FOOTPLATE (2). Continue routing the cable as shown ending at the RIGHT MID PULLEY ASSEMBLY (I). Reattach the previously removed QUICK CONNECT to the end of the LOWER SHORT CABLE (44). NOTE: THE CABLE MUST BE INSERTED BETWEEN THE PULLEY AND THE PULLEY GUIDE (J) AND MOVE FREELY. Repeat the routing on the left side of the unit using the remaining LOWER (SHORT) CABLE (44). 13 STEP 8: Attach the BACK THIGH HOLD CLAMP (50) to the the MAIN UPRIGHT (1) by using two M6 x 60mm SCREWS (69) and two 1/4” WASHERS (70) from the back of the MAIN UPRIGHT (1). Attach the ROLLER PAD ASSEMBLY (7) to the MAIN UPRIGHT (1) by using four M10 x 70mm SCREWS (59), eight 3/8” WASHERS (57), and four M10 HEX NYLOCK NUTS (71) through the FRONT SHROUD (8) and through the MAIN UPRIGHT (1). Tighten SECURELY. 14 STEP 9: Attach the TOP FRONT COVER (17) to the TOP BACK COVER (16) using eight M4 ZINC PHILLIPS PAN HEAD SCREWS (72). DO NOT OVERTIGHTEN SCREWS INTO PLASTIC PARTS. 15 STEP 10: Insert the ball end of one GUIDE CABLE (42) through the eye hook on one FLOATING PULLEY ASSEMBLY (11). Insert and hook the ball end of the cable into the SLOTTED BUSHING (L) located at the bottom of the frame located directly below the FLOATING PULLEY ASSEMBLY (11). Screw the threaded end of the cable into the FRONT UPRIGHT (1) and loosely tighten the cable by screwing the JAM NUT (M) to the top of the frame. REPEAT THE ABOVE PROCESS FOR THE REMAINING GUIDE CABLE (42). 16 STEP 11: Assemble the MOUNTING BRACKET (9) to the top of the FRONT UPRIGHT (1) using two M10 x 20mm SCREWS (66) and two 3/8” WASHERS (57). Tighten screws SECURELY. Attach the SIDE TOP LEFT COVER (28), the SIDE TOP RIGHT COVER (29) and the MAIN TOP COVER (15) to the MOUNTING BRACKET (9) using four M4 x 0.7 ZINC PHILLIPS PAN HEAD SCREWS (65). DO NOT OVERTIGHTEN SCREWS INTO PLASTIC PARTS. 17 STEP 12: Referencing step 5, at the UPPER SWIVEL PULLEYS (25) push back on the QUICK CONNECT SLEEVE (F) at the end of each cable and attach the SHORTER HANDLES (38). Repeat the process for attaching the ADJUSTABLE HANDLES (40) to the lower cable ends and the MEDIUM HANDLES (39) to the middle cable ends. NOTE: THE HANDLE CONFIGURATION DEFINED WILL ACCOMMODATE MOST EXERCISES. NOTE: THE FOOT STRAP (41) IS TO BE ATTACHED TO ONE OF THE MID SECTION PULLEY CABLE ENDS FOR LEG EXTENSIONS AND TO ONE OF THE LOWER PULLEY CABLE ENDS FOR LEG CURL EXERCISES. 18 MAINTENANCE Please note: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your Life Fitness customer service representative at (800) 351-3737. * Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury. * PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION. REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD ON-LINE AT WWW.LIFEFITNESS.COM. Model #: _____________________________________ Serial #'s: _____________________________________ Note: The Model/Serial Number label is located towards the bottom of the RIGHT SIDE UPRIGHT. Date of Purchase: _____________________________________ Dealer’s Name _____________________________________ Dealer’s Phone# _____________________________________ Thank you for purchasing the Life Fitness G5 CABLE MOTION GYM SYSTEM 19 LIMITED WARRANTY Life Fitness® G5 Cable Motion™ Gym System Life Fitness extends the following LIMITED WARRANTY to the original owner (proof of purchase required, keep your receipt with this manual) of the Life Fitness product. The Warranty terms apply to IN HOME and LIGHT INSTITUTIONAL USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the Life Fitness product or a weld should crack or break, it will be repaired or replaced by Life Fitness. Terms: IN HOME USE ONLY: Lifetime – for so long as the Customer owns the Life Fitness product; LIGHT INSTITUTIONAL USE: Ten (10) years. 2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, Life Fitness will supply replacement parts: all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger, spring and knob. Terms: IN HOME USE ONLY: Lifetime – for so long as the Customer owns the Life Fitness product; LIGHT INSTITUTIONAL USE: One (1) year. 3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship, Life Fitness will repair or replace them, at its option. Terms: IN HOME USE ONLY: Three (3) years; LIGHT INSTITUTIONAL USE: Ninety (90) days. 4. CONDITIONS AND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized Life Fitness Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of Life Fitness will void this Limited Warranty. 5. REPLACEMENT AND REPAIR EXPENSES. Life Fitness will provide only replacement parts or repair under this warranty. The Owner is responsible for all other costs. Such costs may include, but are not limited to: a. labor charges for service, removal, repair or reinstallation of the Life Fitness product or any component part; b. shipping, delivery, handling and administrative charges for returning parts to Life Fitness; and c. all necessary or incidental costs related to installation of the replacement parts. 6. SHIPPING. If shipping by the Owners is deemed necessary (in sole discretion of Life Fitness), parts should be shipped in their original carton or equivalent packaging, fully insured with shipping charges prepaid. Life Fitness will not assume any responsibility for any loss or damage incurred in shipping. 7. CLAIM PROCEDURES. If service on your Life Fitness product is required during the warranty period, please contact our Customer Service Department at 1-800-351-3737 (U.S. and Canada) or +1-847-288-3300 (outside of U.S. and Canada) for instructions regarding returning or replacing parts. Please have available the following information: (i) the dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product(s) (the serial number location is called out on the final assembly drawing included with your assembly instruction); (iv) a description of the nature of the problem. 8. OWNER’S RIGHT. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary depending on local law. 9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law, shall have no greater duration than the warranty period set forth above. There are no warranties which extend beyond the description in this Limited Warranty. Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you. 10. DISCLAIMER. No other express warranty has been made or will be made on behalf of Life Fitness with respect to any Life Fitness product or the operation, repair or replacement of any Life Fitness product. Life Fitness shall not be responsible for injury, loss of use of the Life Fitness product, inconvenience, loss or damage to personal property, whether direct or indirect, and incidental or consequential damages, so the above limitation or exclusion may not apply to you. Notes: 20 LIFE FITNESS 5100 NORTH RIVER ROAD. SCHILLER PARK, IL 60176 U.S.A. Tel: 1.847.288.3300 Fax: 1.800.216.8893 1.800.351.3737 (Toll-free within the U.S. and Canada) www.LifeFitness.com INTERNATIONAL OFFICES Life Fitness Atlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 666 Fax: (180) 646 703 Life Fitness (UK) Ltd. Queen Adelaide Ely, Cambs CB7 4UB United Kingdom Phone CSS: (01353) 665507 Fax CSS: (01353) 666719 Life Fitness EUROPE GmbH Siemensstrasse 3 85716 Unterschleissheim Germany Phone: (089) 31 77 51-0 Fax: (089) 31 77 51 99 Life Fitness Benelux N.V. Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: 31 (180) 64 66 69 Fax: 31 (180) 64 66 99 Life Fitness Italia S.R.L. Via Crivellin 7/N 37010 Affi Verona Italy Phone: 39 (457) 237811 Fax: 39 (457) 238197 Life Fitness Japan 8/F, Nippon Brunswick Building 5-27-7 Sendagaya Shibuya-Ku, Tokyo 151-0051 Japan Phone: 81 (3) 3359-4309 Fax: 81 (3) 3359-4307 Life Fitness Asia Pacific Limited Room 2610, Miramar Tower 132 Nathan Road, Tsimshatsui Kowloon, Hong Kong Phone: (852) 2891-6677 Fax: (852) 2575-6001 Life Fitness Do Brazil Al. Rio Negro, 433-Predio 2-Sala 2 3° andar (Confab) Aplhaville-Barueri-Sao Paulo CEP: 06454-904 Brazil Phone: 55 (11)7295-2217 Fax: 55 (11) 7295-2218 LFG5-002 Rev A 08/07
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-702 About : uuid:e77f42bb-5ac4-45f6-90ec-e6f055f1c0d6 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2007:08:16 16:02:33-05:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2008:04:16 11:35:13-05:00 Metadata Date : 2008:04:16 11:35:13-05:00 Document ID : uuid:e1582d9f-b140-4bfb-a498-e97c170814db Instance ID : uuid:92d08d10-d4ee-4481-8624-b45fc8f1ed93 Format : application/pdf Title : LFG5-002_G5.qxd Creator : GornicT Has XFA : No Page Count : 21 Author : GornicTEXIF Metadata provided by EXIF.tools