Life Fitness Gs4 Users Manual LP5A

Life%20Fitness-%20PM%20GS%20GS4-LP5A-101%20Leg%20Press%20Adapter%20Kit%20English

Life Fitness- PM GS GS4-LP5A-101 Leg Press Adapter Kit English Life Fitness- PM GS GS4-LP5A-101 Leg Press Adapter Kit English

GS4 Life Fitness- PM GS GS4-LP5A-101 Leg Press Adapter Kit English

GS4 to the manual 662c5b39-0218-4f6f-8b13-751e68472fa6

: Life-Fitness Life-Fitness-Gs4-Users-Manual-353955 life-fitness-gs4-users-manual-353955 life-fitness pdf

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

LEG PRESS ADAPTER KIT
FOR GS4 GYM SYSTEM
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.

USER’S GUIDE
CLASS H
PART # 7362701
REV. A

1

Version: GS4-LP5A-101
Revision: 11/01/02

TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3

Parts list..........................4
Assembly Instructions.....4-11
Insert-Registration Card

IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.

6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.

2. Obtain a medical exam before beginning any
exercise program.

7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.

3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
jammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.

8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.

5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.

9. Children must not be allowed near this machine.
Supervise teenagers.
.

NOTE: In a continual effort to improve our products, specifications are subject to change
©2002 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2

IMPORTANT NOTES
Please note:
* Thank you for purchasing the ParaBody GS4 Leg Press Adapter Kit. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.

Tools Required for Assembly
* 9/16” wrench
* Ratchet with 9/16” socket
* Adjustable wrench
* Tape measure

Bolt Length Ruler
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

BOLT LENGTH

BOLT LENGTH RULER:

1/2

0

1/2

1

1/2

2

1/2

3

3

1/2

4

1/2

5

6

PARTS LIST
QTY
KEY
DESCRIPTION
PART #
1
1
CONNECTING TUBE
ACU04-1525
1
2
PULLEY HOUSING
ACU04-1526
1
3
CABLE RETAINER
ACU02-0055
4
LEG PRESS CABLE 202-3/4 1
ACU13-0149
7
5
3-1/2 PULLEY
ACU06-0024
2
6 ACUDA1E03853416NB
3/8” X 5-3/4” BOLT
5
7 ACUDA1E03843416NB
3/8 X 4-3/4” BOLT
2
8 ACUDA1E03833416NB
3/8” X 3-3/4” BOLT

KEY
9
10
11
12
13
14
15

PART #
ACUDA1E03823416NB
ACUDA1E03813416NB
ACUDC1250100020B
ACUDB2E03811000B
ACU08-0085
ACU08-0076
ACU08-0079

QTY
DESCRIPTION
2
3/8 X 2-3/4” BOLT
3
3/8 X 1-3/4” BOLT
9
3/8” WASHER
14
3/8” LOCK NUT
4
STEP SPACER 19/32”
4
STEP SPACER 1-9/16”
2
STEP SPACER 1-11/16”

NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM
SYSTEMS

FIGURE 1
REMOVE LOWER
PULLEY

1

DISCARD!
CABLE

STEP 1:
• Remove END CAP and the bolts attaching the FRAME BRACE and insert new CONNECTING TUBE (1) using same BOLTS and reinstall endcap.
• Remove the LEG CABLE and the BOLT, NUT and WASHER used to secure CABLE to base. Discard CABLE
4

3/8 X 5-3/4” 6
2

11

12

FIGURE 2
STEP 2:
• Install PULLEY HOUSING (2) using two 3/8 X 5-3/4” BOLTS (6), four 3/8” WASHERS (11) and two 3/8” LOCK NUTS (12)
as shown in FIGURE 2

1/2

0

1/2

1

1/2

2

1/2

3
5

1/2

4

1/2

5

6

1
3/8 X 3-3/4” 8
12

11

FIGURE 3
STEP 3:
• Assemble the new LEG PRESS to the CONNECTING TUBE (1) using two 3/8 X 3-3/4” BOLTS (8), four 3/8” WASHERS (11)
and two 3/8” LOCK NUTS (12) as shown in FIGURE 3

6

5

4(a)

CABLE GUIDE

5
12
3/8 X 1-3/4” 10

4(b)
2

FIGURE 4
STEP 4:
• Screw the threaded end of the LEG PRESS CABLE (4) into the end of the FLOATING PULLEY BRACKET. Secure the CABLGUIDE
in place with the JAM NUT on the GUIDE CABLE. See FIGURE 4(a)
• Route the LEG PRESS CABLE (3) around one 3-1/2” PULLEY (5) and re-assemble the PULLEY to the FLOATING PULLEY PLATES
usingthe BOLT, NUT and PULLEY which were removed. See FIGURE 4.
• Assemble one 3-1/2 PULLEY (5) to the PULLEY HOUSING (2) using one 3/8 X 1-3/4” BOLT (10) and one 3/8” LOCK NUT (12) as shown
in FIGURE 4(b). NOTE: CABLE MUST BE PLACED IN PULLEY HOUSING BEFORE INSTALLING PULLEY

1/2

0

1/2

1

1/2

2

1/2

3
7

1/2

4

1/2

5

6

12
11
10 3/8 X 1-3/4”
LEG PRESS BRACKET

4

5
7 3/8 X 4-3/4”

3

FIGURE 5
STEP 5:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (10), one 3/8” WASHER (11), one “L” CABLE RETAINER (3)
and one 3/8” LOCK NUT (12) as shown in FIGURE 5. Make sure the CABLE is in the grooves of all the pulleys.
• SECURELY attach the BRACKET (from LP5 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-3/4” BOLTS (7), two 3/8” WASHERS (11), and two 3/8” LOCK NUTS (12). See FIGURE 5.

4

12

3/8 X 1-3/4” 10
5

SEAT FRAME

FIGURE 6
STEP 6:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (10) and one 3/8” LOCK NUT (12) as shown in FIGURE 6. Make sure the
CABLE is in the grooves of all the pulleys.
8

FIGURE 7

SEAT FRAME
4

3/8 LOCK NUT 12

3/8 X 4-3/4” 10

5

14

STEP 7:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the SEAT
FRAME using one 3/8 X 4-3/4” BOLT (7), two STEP SPACERS 1-9/16” (14) and one 3/8” LOCK NUT (12) as shown in FIGURE 7. Make
sure the CABLE is in the grooves of all the pulleys.
MAIN ARM
12
5
4

13

3/8 X 2-3/4” 9

FIGURE 8
STEP 8:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
MAIN ARM using one 3/8 X 2-3/4” BOLT (9), two STEP SPACERS 19/32” (13) and one 3/8” LOCK NUT (12) as shown in FIGURE
8. Make sure the CABLE is in the grooves of all the pulleys.
1/2

0

1/2

1

1/2

2

1/2

3
9

1/2

4

1/2

5

6

FIGURE 9

SEAT FRAME
4
3/8” LOCK NUT 12
5

14

3/8 X 4-3/4” 7
STEP 9:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
SEAT FRAME using one 3/8 X 4-3/4” BOLT (7), two STEP SPACERS 1-9/16” (14), and one 3/8” LOCK NUT (12) as shown in
FIGURE 9. Make sure the CABLE is in the grooves of all the pulleys.

FIGURE 10

MAIN ARM
12
5
4
13

3/8 X 2-3/4” 9

STEP 10:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the MAIN
ARM using one 3/8 X 2-3/4” BOLT (9), two STEP SPACERS 19/32” (13) and one 3/8” LOCK NUT (12) as shown in FIGURE 10. Make
sure the CABLE is in the grooves of all the pulleys.

10

FIGURE 12

SEAT FRAME

4
12

15

3/8 X 4-3/4” 7

STEP 12:
• SECURELY assemble the swivel end of the LEG PRESS CABLE (4) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (15), two STEP
SPACERS 1-11/16” (15) and one 3/8” LOCK NUT (12). (NOTE: SECURELY tighten, then back nut off 1/4 turn)

CABLE ROUTING DIAGRAM

11

ADJUST!
ADJUST!

FIGURE 13
STEP 13:
• Before setting the correct amount of tension in the cables, push the HEAD PLATE down, insert the WEIGHT SELECTOR PIN,
and perform several repetitions at the leg press station. This will relax the cable system and prevent the HEAD PLATE from
lifting up.

THIS CONCLUDES THE ASSEMBLY OF THE GS4-LP5A LEG PRESS ADAPTER KIT
Thank you for purchasing the Parabody GS4-LP5A Leg Press Adapter Kit. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.

12



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2003:10:20 12:05:23-05:00
Modify Date                     : 2003:10:20 12:05:23-05:00
Subject                         : GS4-LP5A
Page Count                      : 12
Creation Date                   : 2003:10:20 17:05:23Z
Mod Date                        : 2003:10:20 17:05:23Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : johnsot
Keywords                        : 
Metadata Date                   : 2003:10:20 17:05:23Z
Creator                         : johnsot
Title                           : GS4-LP5A
Description                     : GS4-LP5A

EXIF Metadata provided by EXIF.tools