Life Fitness Lifefitness G7 Users Manual LFG7 003_G7 8.09.07

Life%20Fitness-%20PM%20LFG%20LFG7-001%20G7%20English

Life Fitness- PM LFG LFG7-001 G7 English Life Fitness- PM LFG LFG7-001 G7 English

2015-01-21

: Life-Fitness Life-Fitness-Lifefitness-G7-Users-Manual-353996 life-fitness-lifefitness-g7-users-manual-353996 life-fitness pdf

Open the PDF directly: View PDF PDF.
Page Count: 21

DownloadLife-Fitness Life-Fitness-Lifefitness-G7-Users-Manual- LFG7-003_G7 8.09.07  Life-fitness-lifefitness-g7-users-manual
Open PDF In BrowserView PDF
G7 CABLE MOTION™ GYM SYSTEM
USER GUIDE

WARNING:
Read and follow all directions for each step to insure proper assembly
of this product.
CLASS H
PART # 8352100 REV. A
VERSION: LFG7-001
DATE: 08-10-07

TABLE OF CONTENTS
Safety Statement . . . . . . . . . . . . . . . .2

Assembly Instructions . . . . . . . . . . . . . .7

Gym Dimensions. . . . . . . . . . . . . . . . .3

General Maintenance . . . . . . . . . . . . . .19

Components List . . . . . . . . . . . . . . . . .4

Warranty Statement . . . . . . . . . . . . . . .20

Required Hardware . . . . . . . . . . . . . . .6

Contact Information. . . . . . . . . . . . . . . .21

IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO
MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions on the use of this machine including the workout book and instructional DVD. Use only for intended exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a
broken or jammed machine. Notify your authorized Life Fitness dealer before use and have
repairs made by an authorized service technician.
5. Be certain that weight pin is completely inserted. Use only the pin provided by the manufacturer. If
unsure, call your authorized Life Fitness dealer.
6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found in
this condition. DO NOT attempt to fix. Notify your authorized Life Fitness dealer.
7. Inspect cables and their connections before using machine. Pay particular attention to the cable
ends. DO NOT attempt to fix. Notify your authorized Life Fitness dealer before use and have
repairs made by an authorized service technician.
8. Make sure all spring loaded pull pins are fully engaged in the adjustment position before use.
9. Children and pets must not be allowed near this machine. Supervise teenagers.

Please note:
* Thank you for purchasing the Life Fitness G7 Cable Motion Gym System. Please
read these instructions thoroughly and keep them for future reference. This product
must be assembled on a flat, level surface to assure its proper function.
* DO NOT securely tighten any frame connections until the entire frame has been
assembled, unless otherwise stated.
NOTE: In a continual effort to improve our products, specifications are subject to change.
© 2007 Life Fitness, a division of Brunswick Corporation. All rights reserved.
Life Fitness is a trademark of Brunswick Corporation.
www.LifeFitness.com
2

GYM DIMENSIONS

Weight:
Resistance Ratio:

720 lbs
1:2

3

COMPONENTS LIST
ITEM NO.

QTY.

PART NO.

DESCRIPTION

1

1

8172901

LEFT TOWER

2

1

8178003

TOP BRACKET TUBE

3

1

8178002

MIDDLE BRACKET TUBE

4

1

8178004

5

1

6

1

8257401

RIGHT U BRACKET

7

1

8256901

LEFT U BRACKET

8

1

8316401

RIGHT SWIVEL PULLEY

9

1

10

1

BOTTOM BRACKET TUBE

8613201
& 8162201
8351601

Roller
Carriage
Assy.
(8613201)
Chrome Slide
(8162201)
LEFT SLIDE
TUBE
(WITH
ROLLER &
CARRIAGE)
ASSEMBLY

8151301

LEFT SWIVEL PULLEY

8613101
& 8162201
8351701

Roller
Assy.
(8613101)
& CARRIAGE)
Chrome Slide
(8162201)
RIGHTCarriage
SLIDE TUBE
(WITH
ROLLER
ASSEMBLY

11

1

8172001

RIGHT TOWER

12

1

8176701

CHIN UP BAR

13

2

3258301

PULLEY, 88.9 OD X 10 X 25.4

14

4

8228901

COVER, PULLEY, PARTIAL

15

4

7634401

GUIDEROD RETAINER

16

4

8264701

GUIDE ROD ASSEMBLY

17

30

7935301

WEIGHT PLATE, 10LB, CASTEEL

18

2

8262501

TOP PLATE 15, CASTEEL, SPCL

19

2

8315601

HEAD PLATE PULLEY ASSEMBLY

20

4

8264301

CUSHION, WEIGHT STACK, 65MM

21

2

8265601

CABLE, BE, BE

22

2

8312601

FOOT, EXTENSION, FLOV

23

2

8167301

SIDE SHROUD

24

6

8244301

KIOSK BRACKET

25

1

8275801

KIOSK ASSEMBLY

43

2

7936701

WEIGHT PIN & RING

44

4

8229001

COVER, PULLEY, FULL

45

2

7944401

D RINGS

46

1

8288601

THIGH STRAP

47

1

7745801

FOOT STRAP

48

1

8280401

TOWEL

49

1

8348101

MARKER

50

2

8140702
8112801

HANDLES

51

2

2103801

SNAP LINKS

52

1

8288701

DVD

53

1

7777301

TOUCH UP PAINT, PLT

54

1

8313701

HARDWARE BAG

55

1

8280501

WATER BOTTLE

PAPER BINDER WORKOUT BOOK - 70 PAGES
8265801
WEIGHT STACK LABELS (Qty. 2)
8327001
ACCESSORY ADAPTER RINGS (Qty. 2)
7944401

4

COMPONENTS LIST
HARDWARE LISTED BELOW
ITEM NO.

QTY.

PART NO.

DESCRIPTION

26

32

3256201

M10 X20MM SCREW

27

52

3264201

M10 WASHER

28

20

3242201

M5 HEX SCREW

29

20

3264101

M6 WASHER

30

4

3256208

M10 X 55MM SCREW

31

2

3256206

M10 X 45MM SCREW

32

13

3242002

M10 HEX NYLOCK NUT

33

7

3256211

M10 X 70MM SCREW

34

2

3264601

M10 SOCKET HEAD NUT

35

2

3256207

M10 X 50MM SCREW

36

2

3264501

PULLEY RETAINER

37

4

3232421

RETAINER RING

38

4

3240502

M10 X 50mm HEX TENSION SCREW

39

32

3262501

M5 SHOULDER SCREW

40

12

3264901

M10 X 20MM SCREW

41

12

3265001

M10.5 WASHER

REQUIRED TOOLS LISTED BELOW
* 7mm ALLEN WRENCH (2)
* 4mm ALLEN WRENCH
* 5mm ALLEN WRENCH
* 17mm WRENCH
* EXTERNAL SNAP RING PLIERS
* ADJUSTABLE WRENCH
* PHILLIPS SCREW DRIVER

5

HARDWARE:

6

NOTE: Two person assembly is recommended.
STEP 1:
Make sure the LEFT TOWER (1) and the RIGHT TOWER (11) are positioned correctly prior to assembly. The LEFT
U BRACKET (A) and RIGHT U BRACKET (B) should point towards each other as shown in the above illustration.
Use four M10 x 20mm SCREWS (26) and four M10 WASHERS (27) to connect the BOTTOM BRACKET TUBE (4)
to the LEFT TOWER (1). Finger tighten only.
NOTE: THE BOTTOM BRACKET TUBE (4) HAS A RUBBER PAD ATTACHED TO IT TO MAKE CONTACT WITH THE
FLOOR.
Repeat the above process using the TOP BRACKET TUBE (2) and the MIDDLE BRACKET TUBE (3).
NOTE: THE TOP BRACKET TUBE (2) DOES NOT HAVE ANY HOLES. THE MIDDLE BRACKET TUBE (3) HAS
THREE HOLES THROUGH THE TOP AND BOTTOM.
Repeat all of the above steps to attach the TOP (2), MIDDLE (3), and BOTTOM (4) BRACKET TUBES to the RIGHT
TOWER (11).
7

STEP 2:
Attach the CHIN UP BAR (12) between the LEFT TOWER (1) and RIGHT TOWER (11) using four M10 x 70mm
SCREWS (33), eight M10 WASHERS (27), and four M10 HEX NYLOCK NUTS (32). Finger tighten only.
NOTE: Make sure the CHIN UP BAR (12) is in the correct position as shown.
Tighten all FRAME and CHIN UP BAR screws and nuts securely.

8

STEP 3:
Slide the top of the LEFT SLIDE TUBE ASSEMBLY (5) over the UPPER BRACKET (C) on the LEFT TOWER (1).
NOTE: MAKE SURE THE ENGRAVED NUMBERS ON THE LEFT SLIDE TUBE ASSEMBLY (5) FACE THE INSIDE
OF THE GYM. NOTE THE ORIENTATION OF THE CARRIAGE.
Secure the LEFT SLIDE TUBE ASSEMBLY (5) to the UPPER BRACKET (C) of the LEFT TOWER (1) using one
M10 x 45mm SCREW (31), two M10 WASHERS (27), and one M10 HEX NYLOCK NUT (32). Do not tighten at
this time.
Secure the LEFT SLIDE TUBE ASSEMBLY (5) to the LOWER BRACKET (D) of the LEFT TOWER (1) using one
M10 x 55mm SCREW (30), two M10 WASHERS (27), and one M10 HEX NYLOCK NUT (32).
Repeat the above process to secure the RIGHT SLIDE TUBE ASSEMBLY (10) to the RIGHT TOWER (11). Tighten
all nuts and screws securely,

9

STEP 4:
Remove the protective paper from the SIDE SHROUD (23) before installation.
Install one SIDE SHROUD (23) to the RIGHT TOWER (11) using sixteen M5 SHOULDER SCREWS (39) on the
inside of the SIDE SHROUD (23) into the UPRIGHT TUBES (E) of the RIGHT TOWER (11). Tighten the screws
securely.
NOTE: YOU MUST BE STANDING INSIDE THE GYM TO INSTALL THE SIDE SHROUD (23).
Repeat this process for installing one SIDE SHROUD (23) to the LEFT TOWER (1).
Attach the RIGHT U BRACKET (6) onto the back of the UPRIGHT TUBE (E) of the RIGHT TOWER (11) using four
SCREWS (28) and four M6 WASHERS (29). Tighten the screws securely.
Repeat this process for installing the LEFT U BRACKET (7) onto the back of the UPRIGHT TUBE (F) of the LEFT
TOWER (1).

10

NOTE: The Side Shroud is not shown in this illustration for clarity.

STEP 5
NOTE: INSTALL FROM THE INSIDE OF THE UNIT.
Position two WEIGHT STACK CUSHIONS (20) and GUIDE RODS (16) at the GUIDE ROD BRACKET (G) on the
RIGHT TOWER (11) as shown.
NOTE: MAKE SURE THAT THE PLUGGED END OF THE GUIDE RODS (16) ARE FACING UP.
Slide one WEIGHT PLATE (17) over the GUIDE RODS (16) and slowly lower the WEIGHT PLATE (17) onto the
WEIGHT STACK CUSHIONS (20).
Continue stacking a total of fifteen WEIGHT PLATES (17).
Slide one TOP PLATE (18) over the GUIDE RODS (16) and slowly lower it onto the WEIGHT PLATES (17).
Slide one WEIGHT PIN with RING (43) over the stem of the TOP PLATE (18 ).
Thread the HEAD PLATE PULLEY ASSEMBLY (19) into the TOP PLATE (18). Do not tighten! This will be adjusted
later.
Slide one RETAINING RING (37) over each of the GUIDE RODS (16).
Thread an M10 X 50mm HEX TENSION SCREW (38) into each of two GUIDE ROD RETAINERS (15). Do not fully
thread the M10 X 50mm HEX TENSION SCREW (38) into the GUIDE ROD RETAINERS (15).
Slide the GUIDE ROD RETAINERS (15) into the holes on the RIGHT TOWER (11). Make sure the M10 X 50mm
HEX TENSION SCREW (38) in the GUIDE ROD RETAINERS (15) are facing up.
Push the GUIDE ROD RETAINERS (15) up high enough so that the GUIDE RODS (16) can be placed under
them.
Lower the GUIDE ROD RETAINERS (15) over the GUIDE RODS (16).
Slide the RETAINING RINGS (37) up. Use a RETAINING RING PLIER to secure the RETAINING RINGS (37) into
the groove on the GUIDE ROD RETAINERS (15). If the groove is hidden inside the hole on the tube, use a 5mm
ALLEN WRENCH to loosen the M10 X 50mm HEX TENSION SCREW (38) until the groove is accessible.
Repeat this step to complete the LEFT TOWER assembly.
11

STEP 6:
Uncoil cables to remove all twists.
Remove the UPPER PULLEYS (H) on the RIGHT TOWER (11) and LEFT TOWER (1) by removing the M10 x 50mm
SCREW (I), PULLEY RETAINER (J), M10 SOCKET HEAD NUT (K), and PARTIAL PULLEY COVERS (L). Set the
UPPER PULLEYS (H) and hardware aside.
Remove the LOWER PULLEYS (M) on the RIGHT TOWER (11) and LEFT TOWER by removing the M10 x 55mm
SCREW (N), M10 WASHERS (O), and M10 HEX NYLOCK NUT (P).

12

STEP 7:
Insert the threaded end of the CABLE (21) where UPPER PULLEY (H) was located.
Lower the CABLE (21) down the long vertical tube that is in front of the gym until it can be retrieved near where the
LOWER PULLEY (M) was located. Carefully pull enough cable out to reach the ROLLER CARRIAGE (Q).
REINSTALL the LOWER PULLEY using the previously removed M10 x 55mm SCREW (N), M10 WASHERS (O),
and M10 HEX NYLOCK NUT (P). Be sure that the CABLE (21) is properly routed around the PULLEY.
Bring the threaded end of the CABLE (21) up to the ROLLER CARRIAGE (Q) and thread the CABLE (21) into the
ROLLER CARRIAGE (Q). Do not tighten!
Assemble the MIDDLE UPPER PULLEY (13) by using two FULL PULLEY COVERS (44), one PULLEY RETAINER
(36), one M10 SOCKET HEAD NUT (34) and one M10 x 50mm HEX TENSION SCREW. (38).
Feed the cable end with the small ball between the MIDDLE UPPER PULLEY BRACKET (S) and then through the
forward most hole in the MIDDLE BRACKET TUBE (3) above the HEAD PLATE PULLEY ASSEMBLY (19).
Take the CABLE (21) down and around the HEAD PLATE PULLEY (19) and back up through the MIDDLE BRACKET TUBE (3) again, passing through the remaining access hole.
Feed the CABLE (21) around where the UPPER PULLEY (H) of the RIGHT TOWER (11) was located. Forward the
CABLE (21) through the TOP BRACKET TUBE (2) and out the access hole where the UPPER PULLEY (H) was
located.
REINSTALL UPPER PULLEY (H) using the previously removed M10 x 50mm SCREW (I), PULLEY RETAINER (J),
M10 SOCKET HEAD NUT (K), and PARTIAL PULLEY COVER (L). Be sure that the CABLE (21) is properly routed
around the PULLEY.
Bring the CABLE (21) down to the ROLLER CARRIAGE (Q).
Feed the CABLE (21) through the two pulleys in the ROLLER CARRIAGE (Q) as shown..
Repeat Step 6 to route the cable through the LEFT TOWER (1).
13

Quick Connect Assembly - Part Number 7872601
ITEM
U
X
W
V
T

QTY.
1
1
1
1
2

Part Number
7726201
7726401
7726301
3249901
3250002

DESCRIPTION
QUICK CONNECT COUPLER
QUICK CONNECT HOUSING
QUICK CONNECT SLEEVE
QUICK CONNECT SPRING
M5 HEX SCREW

STEP 8:
Dissemble one QUICK CONNECT by removing the two M5 HEX SCREWS (T) from the QUICK CONNECT COUPLER (U). Carefuly remove the QUICK CONNECT SPRING (V), the QUICK CONNECT SLEEVE (W) and the
QUICK CONNECT HOUSING (X).
Slide the QUICK CONNECT HOUSING (X), QUICK CONNECT SPRING (V), and QUICK CONNECT SLEEVE (W)
onto the cable as shown. Insert the cable end into the QUICK CONNECT COUPLER (U)
Slide the entire assembly over the QUICK CONNECT COUPLER (U). Attach the QUICK CONNECT COUPLER (U)
and QUICK CONNECT HOUSING (X) together. Use the two M5 HEX SCREWS (T) to tighten.
NOTE: IF NECESSARY, ENSURE CABLES ARE PROPER LENGTH; MAKE NECESSARY ADJUSTMENTS TO THE
WEIGHT STACK PULLEY (TIGHTEN OR LOOSEN); THREAD THE END OF THE CABLE; AND REMOVE THE PULLEY FROM THE HOUSING AND SPIN CLOCKWISE OR COUNTER CLOCKWISE TO LOOSEN/TIGHTEN.

14

STEP 9:
Make adjustments to the HEAD PLATE PULLEY (19) and the threaded cable end to adjust cable length and to
ensure the cable is taut.
If the threaded cable end is completely threaded into the ROLLER CARRIAGE (Q) and there is still some slack in
the CABLE (21), remove the pulley from the HEAD PLATE PULLEY (19). Thread the HEAD PLATE PULLEY (19)
further into the TOP PLATE ASSEMBLY (18) and reinstall the pulley.
NOTE: IF REMOVING THE PULLEY, REMOVE THE M10 x 50mm SCREW , PULLEY RETAINER, M10 SOCKET
HEAD NUT, and PARTIAL PULLEY COVERS.
Once the CABLE (21) is taut, engage the jam nut at the threaded end of the cable as well as at the HEAD PLATE
PULLEY ASSEMBLY (19).

15

STEP 10:
Install the FOOT EXTENSIONS (22) to the BOTTOM BRACKET TUBES (4) using four M10 x 20mm SCREWS (26)
and four M10 WASHERS (27) on each side.

16

STEP 11:
Attach the six KIOSK BRACKETS (24) to the RIGHT TOWER (11) and LEFT TOWER (1) using two M5 HEX
SCREWS (28) and two M6 WASHERS (29) each. Tighten the screws securely.
Fasten the KIOSK (25) to the KIOSK BRACKETS (24) using twelve M10 x 20mm SCREWS (40) and twelve 10.5
WASHERS (41).
NOTE: SUPPORT THE KIOSK (25) UNTIL THE SCREWS ARE INSTALLED.
Secure the top of the KIOSK (25) to the MIDDLE BRACKET TUBE (3) using three M10 x 70mm SCREWS (33), six
M10 WASHERS (27), and three M10 HEX NYLOCK NUTS (32).
NOTE: THE TOP OF THE KIOSK (25) HAS THREE SLOTS THAT FIT UNDERNEATH THE THREE HOLES OF THE
MIDDLE BRACKET TUBE (3).

17

STEP 12:
Adjust the rollers if the ROLLER CARRIAGE (Q) rolls up and down the tube with difficulty, or if it seems to sloppy.
Unscrew the cable end from the roller carriage housing.
Remove the SCREWS (Y) that hold the two PLASTIC COVERS (Z) together.
There are two ROLLER ADJUSTMENT SCREWS (AA), each with a spring, on the back side of the roller carriage
housing. The roller drag can be increased/decreased by adjusting these screws.

18

MAINTENANCE
Please note:
* We recommend cleaning your product (pads and frame) on a regular basis, using
warm soapy water. Touch-up paint can be purchased from your Life Fitness customer service representative at (800) 351-3737.
* Inspect equipment daily. Tighten all loose connections are replace worn parts
immediately. Failure to do so may result in serious injury.

* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD ON-LINE
AT WWW.LIFEFITNESS.COM.
Model #:

_____________________________________

Serial #'s:

_____________________________________

(Note: The Model/Serial label is located on the back side of the UPRIGHT TUBE of the LEFT TOWER)

Date of Purchase: _____________________________________
Dealer’s Name

_____________________________________

Dealer’s Phone#

_____________________________________

Thank you for purchasing the Life Fitness
G7 CABLE MOTION GYM SYSTEM

19

LIMITED WARRANTY
Life Fitness® G7 Cable Motion™ Gym System
Life Fitness extends the following LIMITED WARRANTY to the original owner (proof of purchase required, keep your
receipt with this manual) of the Life Fitness product. The Warranty terms apply to IN HOME and LIGHT INSTITUTIONAL
USE ONLY.
1.

LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the Life Fitness product or a weld should crack
or break, it will be repaired or replaced by Life Fitness. Terms: IN HOME USE ONLY: Lifetime – for so long as the
Customer owns the Life Fitness product; LIGHT INSTITUTIONAL USE: Ten (10) years.

2.

LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, Life Fitness will
supply replacement parts: all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad shafts, allen head bolts, weight selector pin, weight stack shaft,
set screws, protector caps, adjustment chain, cotter pin, plunger, spring and knob. Terms: IN HOME USE ONLY:
Lifetime – for so long as the Customer owns the Life Fitness product; LIGHT INSTITUTIONAL USE: One (1) year.

3.

LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship, Life Fitness will repair or replace them, at its option. Terms: IN HOME USE ONLY: Three (3)
years; LIGHT INSTITUTIONAL USE: Ninety (90) days.

4.

CONDITIONS AND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person
other than an authorized Life Fitness Service Center, any improper assembly, accident, or any other condition
resulting from occurrences beyond the control of Life Fitness will void this Limited Warranty.

5.

REPLACEMENT AND REPAIR EXPENSES. Life Fitness will provide only replacement parts or repair under this
warranty. The Owner is responsible for all other costs. Such costs may include, but are not limited to: a. labor
charges for service, removal, repair or reinstallation of the Life Fitness product or any component part; b. shipping,
delivery, handling and administrative charges for returning parts to Life Fitness; and c. all necessary or incidental
costs related to installation of the replacement parts.

6.

SHIPPING. If shipping by the Owners is deemed necessary (in sole discretion of Life Fitness), parts should be
shipped in their original carton or equivalent packaging, fully insured with shipping charges prepaid. Life Fitness
will not assume any responsibility for any loss or damage incurred in shipping.

7.

CLAIM PROCEDURES. If service on your Life Fitness product is required during the warranty period, please contact our Customer Service Department at 1-800-351-3737 (U.S. and Canada) or +1-847-288-3300 (outside of U.S.
and Canada) for instructions regarding returning or replacing parts. Please have available the following information: (i) the dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product(s) (the serial number location is called out on the final assembly drawing included with your assembly instruction); (iv) a description of the
nature of the problem.

8.

OWNER’S RIGHT. This Limited Warranty gives you specific legal rights. You may also have other rights, which
vary depending on local law.

9.

LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law,
shall have no greater duration than the warranty period set forth above. There are no warranties which extend
beyond the description in this Limited Warranty. Because local laws do not allow limitations on how long an implied
warranty lasts, the above limitations may not apply to you.

10.

DISCLAIMER. No other express warranty has been made or will be made on behalf of Life Fitness with respect to
any Life Fitness product or the operation, repair or replacement of any Life Fitness product. Life Fitness shall not
be responsible for injury, loss of use of the Life Fitness product, inconvenience, loss or damage to personal property, whether direct or indirect, and incidental or consequential damages, so the above limitation or exclusion may
not apply to you.

Notes:

20

LIFE FITNESS
5100 NORTH RIVER ROAD.
SCHILLER PARK, IL 60176 U.S.A.
Tel: 1.847.288.3300 Fax: 1.800.216.8893
1.800.351.3737 (Toll-free within the U.S. and Canada)
www.lifefitness.com
INTERNATIONAL OFFICES
Life Fitness Atlantic BV
Atlantic Headquarters
Bijdorpplein 25-31
2992 LB Barendrecht
The Netherlands
Phone: (180) 646 666
Fax: (180) 646 703

Life Fitness (UK) Ltd.
Queen Adelaide
Ely, Cambs CB7 4UB
United Kingdom
Phone CSS: (01353) 665507
Fax CSS: (01353) 666719

Life Fitness EUROPE GmbH
Siemensstrasse 3
85716 Unterschleissheim
Germany
Phone: (089) 31 77 51-0
Fax: (089) 31 77 51 99

Life Fitness Benelux N.V.
Bijdorpplein 25-31
2992 LB Barendrecht
The Netherlands
Phone: 31 (180) 64 66 69
Fax: 31 (180) 64 66 99

Life Fitness Italia S.R.L.
Via Crivellin 7/N
37010 AFFI Verona
Italy
Phone: 39 (457) 237811
Fax: 39 (457) 7238197

Life Fitness Japan
8/F, Nippon Brunswick Building
5-27-7 Sendagaya
Shibuya-Ku, Tokyo 151-0051
Japan
Phone: 81 (3) 3359-4309
Fax: 81 (3) 3359-4307

Life Fitness Asia Pacific Limited
Room 2610, Miramar Tower
132 Nathan Road, Tsimshatsui
Kowloon, Hong Kong
Phone: (852) 2891-6677
Fax: (852) 2575-6001

Life Fitness Do Brazil
Al. Rio Negro, 433-Predio 2-Sala 2
3° andar (Confab)
Aplhaville-Barueri-Sao Paulo
CEP: 06454-904
Brazil
Phone: 55 (11)7295-2217
Fax: 55 (11) 7295-2218

LFG7-001 Rev A
08/07



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-702
About                           : uuid:4ae13540-3005-446f-9909-5814860e2a27
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2007:08:10 15:48:20-05:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:06:13 10:24:41-05:00
Metadata Date                   : 2011:06:13 10:24:41-05:00
Document ID                     : uuid:1de09e81-52cc-47a6-b3e1-b4bd78f24df4
Instance ID                     : uuid:97e70d29-f750-4bc2-a7de-e0809691f49d
Format                          : application/pdf
Title                           : LFG7-003_G7 8.09.07.qxd
Creator                         : GornicT
Has XFA                         : No
Page Count                      : 21
Author                          : GornicT
EXIF Metadata provided by EXIF.tools

Navigation menu