LifeShield BSC1001 BSC1001 Base Unit User Manual New Base Device Guide indd

LifeShield, Inc. BSC1001 Base Unit New Base Device Guide indd

User Manual 1 Device Guide

Base Installation InstructionsModel BSC1001CAUTION:This equipment cannot report an alarm over the telephone line when other non-LifeShield equipment (telephone, answering system, computer modem, etc.) conected to the same line is in use.Battery WarningRechargeable Lithium Ion Batteries Must Be Recycled or Disposed of Properly. Do not mutilate the battery pack. Do not dispose of the battery pack in a fire due to risk of explosion.LIFESHIELD LIMITED WARRANTY FOR PRODUCTS AND ACCESSORIES PURCHASED IN THE UNITED STATES OR CANADAWHAT IS COVERED UNDER THIS WARRANTYSubject to the limitations and exclusions contained below, LifeShield, Inc. (“LifeShield”) warrants the LifeShield-branded (including all embedded software) sold by LifeShield for use with the LifeShield Security System (the “Products”) to be free from defects in materials and workmanship under normal consumer usage and in accordance with the accompanying instructions and documentation, for the period(s) set forth below. This warranty extends only to the first consumer purchaser, and is not transferable. LifeShield, at its option, will at no charge repair, replace or refund the purchase price of any Products that do not conform to this limited warranty. We may use functionally equivalent reconditioned/ refurbished/pre-owned or new Products or parts and we may retain all replaced Products or parts. No data added to your Products, including but not limited to component names and system preferences, will be reinstalled. This limited warranty is the consumer’s exclusive remedy, and applies to new Products purchased by consumers in the United States or Canada, which are accompanied by this written warranty.PRODUCTS COVERED/LENGTH OF COVERAGE (the “Warranty Period”)New Products: One (1) year from the date of purchase by the first consumer purchaser of the Product.Products That Are Repaired or Replaced.The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever expires later. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATIONTo obtain service or information, please call: LifeShield Customer Service at: 1-888-392-2044Or email us at: support@LifeShield.comYou will receive instructions on how to ship the Products, at your expense, to a LifeShield Authorized Repair Center. To obtain service, you must include:a) a copy of your receipt, bill of sale or other comparable proof of purchaseb) a written description of the problemc) the complete physical address of the location where the system was installed and most importantlyd) your address and telephone number and,e) the “Return Merchandise Authorization” or “RMA” number that LifeShield provides to youWHAT IS NOT COVERED (EXCLUSIONS)Normal Wear and Tear. Periodic repair and replacement of parts due to normal wear and tear are excluded from coverage. Ornamental Decorations. Ornamental decorations, such as emblems and graphics and other decorative elements, are excluded from coverage.Abuse & Misuse. Defects or damage that result from the following are excluded from coverage:a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the Product;b) contact with moisture, liquids, water, rain, extreme humidity, heavy perspiration or makeup, sand, dirt or the like, food, or proximity to or exposure to heat or cold, fire, flood, or lightning;c) other acts which are inconsistent with the instructions and documentation that accompany the Products; andd) use of the Products with any system other than the LifeShield Security System.Use of Non-LifeShield Products and Accessories. Defects or damage that result from the use of Non-LifeShield branded or certified products, accessories, software or other peripheral equipment are excluded from coverage, including without limitation defects or damage to Products that result from such use are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation,software changes, or modification in any way by someone other than LifeShield, or its authorized agents, are excluded from coverage. Altered Products. Products with the following characteristics are excluded from coverage:a) serial numbers or date tags that have been removed, altered or obliterated;b) broken seals or Products that show evidence of tampering;c) mismatched board serial numbers; ord) nonconforming or non-LifeShield housings, antennas, or parts.Communication Services. Defects, damages, or the failure of Products due to any communication service or signal not provided directly by LifeShield is excluded from coverage.Out of Warranty Products. Defects or damages reported to LifeShield after the Warranty Period are excluded from coverage.Other Exclusions and LimitationsANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED IN DURATION TO THE TERM OF THIS EXPRESSED WARRANTY. THE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE REMEDY OF THE CONSUMER, AND LIFESHIELD’S SOLE AND EXCLUSIVE LIABILITY HEREUNDER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL LIFESHIELD BE LIABLE, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE DAMAGES, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR THE ABILITY OR INABILITY TO USE THE PRODUCTS OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. SOME STATES AND JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR A LIMITATION ON THE DURATION OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR FROM ONE JURISDICTION TO ANOTHER.This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.© LifeShield, Inc., 2011. Rev 1/2011.Protected by US patents and patents pending.7 629 880, 7 532 114 7,511,614, 7,495,544, 7,283,048, 7,202,789, 7,119,658, 7,091,827, 7,084,756, 7,079,034, 7,079,020, 7,057,512, 7,053,764, 7,042,353, 7,023,341, 7,019,639, 6,888,459, D538,797, D534,519, D534,146LifeShield Security© 2011 LifeShield, Inc. All rights reserved. LifeShield is a registered trademark and LifeShield Security is a trademark of LifeShield, Inc.Contact InformationWebsite: www.LifeShield.comMail: LifeShield, Inc. Customer Support 770 Township Line Road, Suite 350 Yardley, PA 19067Phone: 1-888-392-2044E-mail: support@LifeShield.comHoneywell is a trademark of Honeywell International, Inc. Li-ion-+Page Button
All LifeShield products work together as a system to protect your home. They must be installed in a specific order to work properly. The Base must be installed first followed by the Console and other components.Base Kit ComponentsBSC1001 BasePSC0101 Power AdapterLS220 Li-ion Rechargeable BatteryPhone CordInternet CableInstall the Base(Only 1 Base may be used on a system)Install Batterya) Locate the LifeShield LS220 Rechargeable Battery.b) Remove the stand by sliding the table stand downward from the main body of the Base.c) Insert the battery, observing correct polarity as shown. When viewed from the front (the side with the logo and the openings for the siren), the positive terminal should be on the right.d) Replace the table stand by sliding upward onto the main body of the Base.NOTE: LED will illuminate briefly when Battery is first connected.Connect Power Adapter• Do not use an electrical outlet that is controlled by a switch.• Insert the power adapter plug fully into the jack on the back of the Base. Plug the power adapter into the wall outlet.CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES PROPERLY.NOTE: Use only LifeShield LS220 Rechargeable Battery supplied with your Base. Use only PSC0101 Power Supply. Do not use any other adapter.Replacement battery packs are also available through the LifeShield’s Customer Support at 1-888-392-2044 or on-line at www.LifeShield.com. Place the power adapter cord so that it does not create a trip hazard, or become pinched and create an electrical hazard.Connect Base to the Internet(and optionally to Telephone Line)Connecting the Basea) Connect the Ethernet cable between an available port on your router and the back of the Base.b) Optionally connect the telephone cord to the Base and telephone wall jack. The telephone line provides a backup path for alarm communications if your internet connection is not functioning.When Using a DSL ModemPlug a DSL filter into the telephone line splitter (which is in turn plugged into a wall phone jack). Plug one end of a telephone cord into the DSL filter and the other end into the telephone line jack in the Base. Connect a second telephone cord from your router into the telephone splitter.Replace the Base in an Existing SystemThis section ONLY applies if you have an existing system with a malfunctioning Base and need to replace the Base. This section does not apply to new systems.Delete the original Base from the system1. On an existing Console, use the SCROLL and SELECT buttons to navigate to GC or Handset (Menu/Security Setup/GCs or Handset).2. Scroll to the Base name, press the SELECT key. 3. Scroll to Delete, press the SELECT key. 4. Press OK key to confirm.Note: In certain configurations, you may have to wait for the Console to synchronize to another unit. This process should only last a few moments. Add the new Base to the system:1. Remove all cords from back of the new Base (power cord, phone, Ethernet) and remove battery from new Base. Wait 1 minute. 2. Connect only the power cord to the new Base and immediately press and hold the PAGE button on the new Base for about 45 seconds until the new Base sounds a success tone (4 ascending beeps). You may release the button. 3. On an existing Console, use the SCROLL and SELECT buttons to navigate to GC or Handset (Menu/Security Setup/GCs or Handset).4. Press the SELECT key to <Add New>. The system will begin searching for the new Base.5. The system display and audio signal will inform you the Base is found. Press OK.6. You will then be given the option to edit the default name7. Use DELETE to erase the current name and replace with new text by using the keypad.8. Press OK.Connect battery and Ethernet cord (and optional telephone line, if applicable) to the Base. Allow 3 minutes for the System to synchronize.NOTE: If you are installing a router for the first time, refer to your router installation instructions before connecting the Base.FCC InformationFCC Part 15This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION:Changes and modifications to this product not expressly approved by LifeShield, Inc. could void not only the user’s authority to operate this device, but also the limited warranty.Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the radio or television receiving antenna• Reorient or relocate and increase the separation between the LifeShield equipment and radio or television receiver• Connect the LifeShield equipment into an outlet on a circuit different from that to which the radio or television receiver is connected• Consult the dealer or an experienced radio/TV technician for helpThe antenna used with this product must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment should be serviced only by Lifeshield, Inc. or its authorized agents.FCC Part 68This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the equipment there is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.Registration No.: Found on the bottom of the unit.The Ringer Equivalence Number (REN) for this is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that a temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact LifeShield, Inc. at 1-888-392-2044 or support@LifeShield.com. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to a party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.You must not connect your phone to:• Coin-operated systems• Most electronic key telephone systemsIf your home has separate wired alarm equipment connected to the telephone line at the same time LifeShield equipment is installed, ensure the installation of both sets of equipment do not interfere with one another. If you have questions about what will disable the equipment, consult your telephone company or a qualified installer.CAUTION:To ensure proper operation, this equipment must be installed according to the enclosed installation instructions. To verify that the equipment is operating properly and can successfully report an alarm, this equipment must be tested immediately after installation, and periodically thereafter, according to the enclosed test instructions.-+Page Button-+Page Button-+Page Button

Navigation menu