LifeShield WGC1000 Cellular Gateway User Manual 10475 cellular back v17 copy
LifeShield, Inc. Cellular Gateway 10475 cellular back v17 copy
Contents
- 1. UserMan
- 2. UsersMan
UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 974092 |
| Application ID | 0SQE11wha3GjMunPWl/69w== |
| Document Description | UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 136.52kB (1706459 bits) |
| Date Submitted | 2008-07-22 00:00:00 |
| Date Available | 2008-09-05 00:00:00 |
| Creation Date | 2008-05-02 15:47:09 |
| Producing Software | Adobe PDF library 8.00 |
| Document Lastmod | 2008-05-18 11:43:28 |
| Document Title | 10475_cellular_back_v17 copy |
| Document Creator | Adobe Illustrator CS3 |
The Cellular Gateway (CGW) automatically establishes a connection between your InGrid Home Security system and the monitoring service center if the primary (broadband) connection to your home has stopped working. The connection is made through the local cellular wireless network, which is the same network that's used for mobile phone and other wireless device communications. Cellular Gateway Kit Contents WGC1000 Cellular Gateway Device Guide IG280 Li-Ion Rechargeable Battery Pack Not included: External antenna (optional) Installing your InGrid Cellular Gateway Prior to adding the Cellular Gateway it is necessary to first install and activate your InGrid System and to have a Handset and/or Console available for use in the Cellular Gateway installation process. Prepare the Cellular Gateway NOTE: This completes the steps to add the Cellular Gateway to the InGrid system. During the time in which the SIM is being activated you can use all features of your InGrid system with the exception of the Cellular Gateway. When the SIM is Ready to Arm successfuly activated the “Ready” Thu 6/12 11:48a screen on your Handset or Console Calls:0 Msg:0 will display the following: Securing the Cellular Gateway (Optional) 1. For personal safety, turn the power to the outlet OFF at the circuit breaker. 2. Leave the wall plate on the outlet, but remove the center screw. 3. Plug the Cellular Gateway into the lower electrical outlet with the tab facing upward. 4. Replace the center screw by inserting it through the tab on the Cellular Gateway. 5. Turn the power back ON at the circuit breaker. PHNBK Possible error messages during the previous step and corrective actions: LCD Screen Add the Cellular Gateway to the InGrid System Once the Cellular Gateway (CGW) has been mounted it must then be “added” to the InGrid System in order to function. 1. Press MENU. 2. Locate the rechargeable battery (included). Insert the battery plug into the two-pin jack and place the battery into the back of the Cellular Gateway. 3. Scroll to GCs or Handset, press SELECT. Battery Jack 4. Scroll to, press SELECT. The system will begin searching for the Cellular Gateway that you are adding. 5. On the Cellular Gateway, press and hold the button in the center of the device until the green light starts flashing (this will put the Cellular Gateway into registration mode). 6. The following messages will appear on the Handset or Console once the system has successfully “found” the Cellular Gateway. CGW GX found Please Wait 60 seconds CGW GX added OK Install the Cellular Gateway The Cellular Gateway should be placed in a location where it will receive a strong external cellular signal while maintaining a good connection with as many internal Grid Controllers (ex. Base, Consoles and Grid Extenders) as possible. Since it will be possible to relocate the Cellular Gateway after it is initially installed (if necessary), chose a location that is (first) close to an outside wall and (second) centrally located within the home. OK 7. Use the Edit feature to rename the device (optional). NOTE: Press DELETE to erase text and use the keypad keys to type in a new name. Once you are satisfied with the entered name, press OK. 8. At this point the InGrid system will communicate with the SIM (Subscriber Identity Module) card that is located inside the Cellular Gateway. If this process is successful you will see the following message appear on the Handset or Console: “Device Not Found” This message appears when the InGrid system is unable to make contact with a new device that’s being added. Move the CGW to a different location and try again to add it. “CGW Service Not Enabled” The device has been successfully added and registered, however the SIM cannot be activated because the user account has not been set up for this service. Contact InGrid Customer Support for assistance if this problem occurs. “SIM not detected” The SIM card (located inside the Cellular Gateway battery compartment) is either defective or missing. Check that the SIM is installed correctly (you may need to remove and reinsert it as shown in Step 1. Then follow the steps described in the “Activating SIM manually”. “SIM activation aborted. No Internet” The SIM activation process was stopped because the Internet connection to the InGrid system has been lost. Once the Internet connection problem is resolved, follow the steps described in the “Activating SIM manually”. The CGW has been successfully added and registered, however the wireless signal is very low. First move the CGW to a location that is closer to the outside walls of the home (closer to the external cellular wireless network). If relocating does not correct the problem it may be necessary to attach and install an external antenna to the CGW. Refer to the “Installing an (Optional) External Antenna”. SIM being activated Allow up to 4 hr OK Ready to Arm Activating SIM Calls:0 Msg:0 PHNBK MENU “Low CGW signal” “SIM not active” The CGW has been successfully added and registered, however the InGrid Home Security System is not able to successfully activate the SIM. 1. Remove the back cover of the Cellular Gateway. 2. Press down on the SIM holder gate while sliding it to the right. Tilt the device slightly to the right and swing the gate open. The system will not allow a new Cellular Gateway to be added until the existing one is deleted. Wait 24 hours and then re-attempt to add the CGW to your system. This allows your system software to be automatically updated overnight. You can also contact InGrid Customer Support to request an immediate software update. “Device Type Not Recognized” THE SIM (SUBSCRIBER IDENTITY MODULE) FOR THIS DEVICE HAS BEEN FACTORY PRE-INSTALLED. IF FOR ANY REASON IT BECOMES NECESSARY TO REPLACE IT PLEASE FOLLOW THE STEPS BELOW. How to fix the problem Software currently loaded on your system is out of date and needs to be updated. Using a Handset or Console: 1. Remove the back cover of the Cellular Gateway. NOTE: Battery is required for operation of this device. Problem description This message will appear “Registration if a Cellular Gateway has Limit already been added to this Exceeded” system. 2. Scroll to Security Setup, press SELECT and enter the Master Code 3. Replace the back cover. MENU (note: time, date and call information will vary) SIM Installation Gate in closed position Swing gate open 3. Locate the carrier card and remove the SIM from the carrier as shown in the diagram. Carrier Card SIM 4. Check that the SIM is oriented correctly and slide it all the way down into the slot in the gate. Gold area Insert SIM into open gate 5. Fully close the SIM gate, then press down on the gate and slide it to the right until it locks (clicks) closed. Try to activate the SIM by following the steps described in the “Activating SIM card manually”. Swing gate closed Gate closed with SIM installed Activating SIM Manually Using a Handset or Console: 1. Press MENU on the Handset or Console 2. Scroll to Utilities, press SELECT and enter the Master Code 3. Scroll to Activate SIM, press SELECT 4. The InGrid system will now automatically go through the SIM card activation process, as described in the “Add the Cellular Gateway to the InGrid System” section, (Step 8). Installing an (Optional) External Antenna If you see this message on your Handset or Console it may be necessary to install an external antenna to increase the signal strength. Ready to Arm Low CGW signal Calls:0 Msg:0 PHNBK MENU Notice: The REN for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. Out of Warranty Products. Defects or damages reported to InGrid after the Warranty Period are excluded from coverage. Radio Equipment WHAT WILL INGRID DO? InGrid, at its option, will at no charge repair, replace or refund the purchase price of any Products that do not conform to this limited warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No data, added to your Products, including but not limited to component names, and system preferences, will be reinstalled. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that my cause undesired operation of the device. NOTE: This item must be ordered separately (optional antenna – InGrid P/N 100000815) External antenna connector To install the external antenna simply attach the plug on the end of the antenna cable to the connector receptacle on the side of the Cellular Gateway. Then, mount the antenna housing on a wall or ceiling. FCC Information FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes and modifications to this product not expressly approved by InGrid, Inc. could void not only the user’s authority to operate this device, but also the limited warranty. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the radio or television receiving antenna • Reorient or relocate and increase the separation between the InGrid equipment and radio or television receiver • Connect the InGrid equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The antenna used with this product must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be serviced only by Ingrid, Inc. or its authorized agents. Industry Canada (I.C.) Notice Terminal Equipment Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved this equipment. HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATION? To obtain service or information, please call: InGrid Customer Services at: 1-877 InGrid-7 (1-877-464-7437) Or email us at: warranty@ingridhome.com You will receive instructions on how to ship the Products, at your expense, to an InGrid Authorized Repair Center. To obtain service, you must include: Battery Warning Rechargeable Li-Ion Batteries Must Be Recycled or Disposed of Properly. Do not mutilate the battery pack. Do not dispose of the battery pack in a fire due to risk of explosion. WHO IS COVERED? This warranty extends only to the first consumer purchaser, and is not transferable. Li-Ion 2004K InGrid Limited Product Warranty INGRID LIMITED WARRANTY FOR PRODUCTS AND ACCESSORIES PURCHASED IN THE UNITED STATES OR CANADA What Does this Warranty Cover? Subject to the exclusions contained below, InGrid, Inc. (“InGrid”) warrants the InGrid-branded or certified accessories (including all embedded software) sold by InGrid for use with the InGrid Home Security System (the “Products”) to be free from defects in materials and workmanship under normal consumer usage and in accordance with the accompanying instructions and documentation, for the period(s) outlined below. This limited warranty is the consumer’s exclusive remedy, and applies as follows to new Products purchased by consumers in the United States or Canada, which are accompanied by this written warranty: PRODUCTS COVERED/LENGTH OF COVERAGE (the “Warranty Period”) New Products: One (1) year from the date of purchase by the first consumer purchaser of the Product. Products that are Repaired or Replaced. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever expires later. WHAT IS NOT COVERED? (EXCLUSIONS) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Ornamental Decorations. Ornamental decorations such as emblems and graphics and other decorative elements, are excluded from coverage. a) a copy of your receipt, bill of sale or other comparable proof of purchase; b) a written description of the problem; c) the complete physical address of the location where the system was installed and most importantly; d) your address and telephone number; and, e) the “Return Merchandise Authorization” or “RMA” number that InGrid provides to you. WHAT OTHER LIMITATIONS ARE THERE? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED TO THE MAXIMUM EXTENT PERMITTED BY LAW. THE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE REMEDY OF THE CONSUMER, AND INGRID’S SOLE AND EXCLUSIVE LIABILITY HEREUNDER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL INGRID BE LIABLE, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT GIVING RISE TO THE DAMAGES, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR THE ABILITY OR INABILITY TO USE THE PRODUCTS OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Cellular Gateway Installation Instructions Model WGC1000 © InGrid, Inc., 2008 Protected by US patents and patents pending. 7,202,789, 7,119,658, 7,091,827, 7,084,756, 7,079,034, 7,079,020, 7,057,512, 7,053,764, 7,042,353, 7,023,341, 7,019,639, 6,888,459, D538,797, D534,519, D534,146 InGrid Home Security © 2008 InGrid, Inc. All rights reserved. InGrid logo is a registered trademark. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from the following are excluded from coverage under this limited warranty: a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the Product resulting from misuse; b) contact with moisture, liquids, water, rain, extreme humidity, heavy perspiration or makeup, sand, dirt or the like, food, or proximity to or exposure to heat or cold, fire, flood, or lightning; c) other acts which are inconsistent with the instructions and documentation that accompany the Products; and d) use of the Products with any system other than the InGrid Home Security System. Use of Non-InGrid Products and Accessories. Defects or damage that result from the use of Non-InGrid branded or certified products, accessories, software or other peripheral equipment are excluded from coverage, including without limitation defects or damage to Products that result from such use. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than InGrid, or its authorized agents, are excluded from coverage. Altered Products. Products with the following characteristics are excluded from coverage: a) serial numbers or date tags that have been removed, altered or obliterated; b) broken seals or Products that show evidence of tampering; c) mismatched board serial numbers; or d) nonconforming or non-InGrid housings, antennas, or parts. Communication Services. Defects, damages, or the failure of Products due to any communication service or signal not provided directly by InGrid is excluded from coverage. Part No. 100000804 Rev. A Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2008:05:02 15:47:09-04:00 Creator : Adobe Illustrator CS3 Modify Date : 2008:05:18 11:43:28+03:00 Producer : Adobe PDF library 8.00 Creation Date : 2008:05:02 15:47:09-04:00 Mod Date : 2008:05:18 11:43:28+03:00 Creator Tool : Adobe Illustrator CS3 Metadata Date : 2008:05:18 11:43:28+03:00 Thumbnail Width : 256 Thumbnail Height : 180 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4472 bytes, use -b option to extract) Document ID : uuid:8E301B7119DC11DDB106E17740978C4E Instance ID : uuid:55f23e2e-00cc-4e8c-8e1c-cb55cf951134 Derived From Instance ID : uuid:8E301B7019DC11DDB106E17740978C4E Derived From Document ID : uuid:8E301B6F19DC11DDB106E17740978C4E N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 17.000000 Max Page Size H : 11.000000 Max Page Size Unit : Inches Font Name : OCRAStd, Myriad-Roman, HelveticaNeue-BoldCond, HelveticaNeue-Condensed, Serifa-Bold Font Family : OCR A Std, Myriad, Helvetica Neue, Helvetica Neue, Serifa Font Face : Regular, Roman, 77 Bold Condensed, 57 Condensed, 65 Bold Font Type : Open Type, Type 1, Type 1, Type 1, Type 1 Font Version : Version 2.005;PS 002.000;Core 1.0.38;makeotf.lib1.7.12746, 001.000, 001.000, 001.000, 001.001 Font Composite : False, False, False, False, False Font File Name : OCRAStd.otf, MyriaRom; Myriad, HelveNeuBolCon; HelveticaNeue BoldCond, HelveNeuCon; HelveticaNeue Condensed, SerifBol; Serifa 65 Bold Plate Names : Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : White, Black, Charcoal, Graphite, Ash, Smoke, Latte, Capuccino, Mochaccino, Mocha, Mars Red, Ruby, Red, Pumpkin, Squash, Sunshine, Pure Yellow, Peridot, Little Sprout Green, Jade, Mint Julep, Emerald, Sea Green, Caribbean Blue, Pure Cyan, Hawaiian Blue, Twillight Blue, Starry Night Blue, Deep Sea Blue, Fresh Lavender, Purple, Amethyst, Rasberry, Pure Magenta, Global Red, Global Squash, Global Pure Yellow, Global Green, Global Pure Cyan, Global Deep Sea Blue, Black 0, PANTONE 2995 C Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 15.999996, 32.000000, 42.999996, 25.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 50.000000, 50.000000, 75.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 75.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000000, 100.000000, 100.000000, 74.902000, 90.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 23.000002, 37.000000, 48.000000, 52.000000, 100.000000, 100.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 25.000000, 25.000000, 0.000000, 25.000000, 50.000000, 75.000000, 100.000000, 75.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 50.000000, 0.000000, 0.000000, 0.000000, 100.000000, 67.843094, 11.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 33.000000, 58.000000, 76.000000, 80.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 67.058800, 0.000000 Swatch Colorant Black : 0.000000, 100.000000, 75.000000, 60.000004, 45.000000, 30.000002, 0.000000, 0.000000, 19.999998, 38.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 25.000000, 25.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 90.196098, 0.000000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Format : application/pdf Title : 10475_cellular_back_v17 copy Page Count : 2 For : Charles Orth, Bounding Box : 16 -61 1339 861 Creator Version : 13 Container Version : 9EXIF Metadata provided by EXIF.tools