Light Wave Technology 1101 RFID SECURITY TRANSMITTER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2223592
Application ID	TDbuIS6ci/IlOBksW1WlMg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.56kB (331994 bits)
Date Submitted	2014-03-24 00:00:00
Date Available	2014-03-24 00:00:00
Creation Date	2014-01-30 10:39:35
Producing Software	Acrobat Distiller 10.1.9 (Windows)
Document Lastmod	2014-03-20 08:30:52
Document Title	Microsoft Word - PKE-AL(PS)-UNI Owners Manual DRAFT - Booklet REV.1.0.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Mike

Passive Keyless Entry System
Passive or Active Keyless entry system
User Guide
OWNERS MANUAL
Lightwave Technology
PKE-AL(PS)-UNI
400 Wright Street
Montreal, QC, Canada, H4N1M6
Website: www.lightwavetechnology.com
WARNING!
It is the responsibility of the vehicle operator to
ensure that their vehicle is parked in a safe and
responsible manner.
A note concerning the battery inside the transmitter:
Depending on your usage of the transmitter, the battery can last anywhere between
2 to 3 years. Although we recommend to replace the battery inside the transmitter
every year to get the best performances from your system.
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
Doc#140109
Rev: 1.0
©2014
-1W-AM-2BTN-PKE-A-
Canada
Passive or Active Keyless entry system
Passive or Active Keyless entry system
User Guide
User Guide
Table of Contents
Diagnostics - Parking lights Flash Table
Government regulations…………………………………………………………………….……
Using the transmitter and ADB………………………………………………………….……
Parking
Lights
Flashes
Doorlock Access Chart……………………………………………………………………….……
1 Flash
Door Lock
Trunk / Hatch Release……………………………………………………………………….……
2 Flashes
Door Unlock
Valet Mode………………………………………………………………………………….……………
3 Flashes
Valet Mode
Parking Light Flash Table…………………………………………………………………………
5 Flashes
Please see your retailer
6 Flashes
Please see your retailer
Door Locking command using ADB while RFID
transmitter is inside vehicle (Active Mode Only)
Please see your retailer
7 Flashes
8 Flashes
Description
Passive or Active Keyless entry system
Passive or Active Keyless entry system
User Guide
User Guide
Government regulations
Trunk/Hatch Release or Motorized liftgate
With RFID
transmitter
Press & Release
Button 1 & 2
on RFDI
transmitter
Parking lights will blink 2 times
Trunk will pop open or Motorized
hatch will open or Close
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
Valet Mode Enabled/Disabled
Use factory
key in
ignition
cylinder
Cycle Key in
ignition cylinder
5x On/Off
Valet On = Parking lights will blink
3 times
Valet Off = Parking lights will blink
2 times
This device complies with the Industry Canada Radio Standards
Specification RSS 210. Its use is authorized only on a no-interference, noprotection basis; in other words, this device must not be used if it is
determined that it causes harmful interferences to services authorized by
IC. In addition, the user of this device must accept any radio interface that
may be received, even if this interfere-ence could affect the operation of
the device.
Warning! Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
device.
IC RSS-GEN, Sec 7.1.2 Warning Statement- (Required for Transmitters)
IC RSS-GEN, Sec 7.1.3 Warning Statement- (Required for license-exempt devices)
ENGLISH:
ENGLISH:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
FRENCH:
FRENCH:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée quivalente (p.i.r.e.) ne dépassepas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
Passive or Active Keyless entry system
Passive or Active Keyless entry system
User Guide
User Guide
Using the Transmitter and ADB
Doorlock Access Chart
The Doorlock mode is configured by your installer at the time of installation.
There are three (3) different doorlock mode. Passive mode does not require
any action from user and is the default method to use. Active mode requires
a physical action from user in order to Lock / Unlock the doors. The ADB
(Part#: XXXXXXX) is required for Active mode and is sold separately. Hybrid
mode requires to use the ADB in active mode but will lock the doors
automatically after 90 seconds if doors are left unlocked inadvertently and
RFID transmitter is not in range.
Your Passive Keyless system is equipped with a 2 button RFDI remote
control. This transmitter is capable of allowing access to your vehicle
without pressing any button on it.
LOCK
Locks the doors and arms the
Starter Kill (if installed)
With Passive
Doorlocking
UNLOCK
With RFID
transmitter
Walk away from
the vehicle
Vehicle doorlocks will Lock / Arm
Parking lights will blink 1 time
Horn will honk 1 times (if connected)
Vehicle doorlocks will Unlock /
Disarm
Parking lights will blink 2 time
Horn will honk 2 times (if connected)
(more than 10 feet)
Unlocks the doors and disarms
the Starter Kill (if installed)
TRUNK
With RFID
transmitter
Walk close to
the vehicle
Opens the Trunk, Hatch or
Power liftgate
(if option installed)
With RFID
transmitter in
range (within 10
(within 10 feet)
With Active
Doorlocking
(ADB)
The Active Doorlock Button (ADB) is an
optional part installed at the entry doors
and can control the Locking and Unlocking
of the doors simply by pressing on it.
feet of the vehicle)
Press & Release
ADB button
With RFID
transmitter in
range (within 10
feet of the vehicle)
NOTE: The RFID transmitter must be
present for the doorlocks to react to the
ADB.
With Hybrid
Doorlocking
(ADB) +
Passive
mode
Press & Release
ADB button
With RFID
transmitter
Walk away from
the vehicle
(more than 10 feet)
With RFID
transmitter in
range (within 10
feet of the vehicle)
Press & Release
ADB button
With RFID
transmitter in
range (within 10
feet of the vehicle)
Press & Release
ADB button
Vehicle doorlocks will Lock / Arm
Parking lights will blink 1 time
Horn will honk 1 times (if
connected)
Vehicle doorlocks will Unlock /
Disarm
Parking lights will blink 2 time
Horn will honk 2 times (if
connected)
After 90 seconds, Vehicle
doorlocks will Lock / Arm
Parking lights will blink 1 time
Horn will honk 1 times (if connected)
Vehicle doorlocks will Unlock /
Disarm
Parking lights will blink 2 time
Horn will honk 2 times (if connected)
Vehicle doorlocks will Lock / Arm
Parking lights will blink 1 time
Horn will honk 1 times (if
connected)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Mike
Create Date                     : 2014:01:30 10:39:35-05:00
Modify Date                     : 2014:03:20 08:30:52-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Mike
Title                           : Microsoft Word - PKE-AL(PS)-UNI Owners Manual DRAFT - Booklet REV.1.0.docx
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:03:20 08:30:52-04:00
Producer                        : Acrobat Distiller 10.1.9 (Windows)
Document ID                     : uuid:6a312def-5a37-4610-9a57-35767caec1d9
Instance ID                     : uuid:f1dfc442-0d85-462a-80a9-61cc19d4f6ad
Page Count                      : 4

EXIF Metadata provided by EXIF.tools