Lightolier Advent Lytespan 1 And 2 Circuit Track 61Xmce Users Manual
2015-02-09
: Lightolier Lightolier-Advent-Lytespan-1-And-2-Circuit-Track-61Xmce-Users-Manual-572035 lightolier-advent-lytespan-1-and-2-circuit-track-61xmce-users-manual-572035 lightolier pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Advent Lytespan® 1 and 2 Circuit Track 61XMCE Page of 3 2 3 1.59mm 4 127.78mm 5 6 1 7 29.46mm 2000mm 3000mm 4000mm Plain Track Finishes Plain Track Aluminum Black White 2m Catalog No. 612MALCE 612MBKCE 612MWHCE 3m Catalog No. 613MALCE 613MBKCE 613MWHCE 4m Catalog No. 614MALCE 614MBKCE 614MWHCE Features 1. Advent Lytespan Track: 6063-T5 Aluminum 1.8mm wall thickness. 2. Track Mounting Clips: 0.61mm Spring steel, in black or white; furnished with track units. 3. Toggle Bolt & Screws: furnished with track units. 4. Conductor (3): 16A current carrying capacity. 5. Insulating Liner: 1.2mm wall, thermoplastic. 6. Neutral Conductor: on bead side of track. 7. Polarity Bead: identifies the neutral conductor. 8. Live End: molded thermoplastic. Includes contacts for power supply leads. 9. Dead End Cover: molded thermoplastic. 10. Mini Coupler: connects track units mechanically and electrically. is polarized and continuously grounded throughout. Electrical conductors are concealed in a insulating liner. Lytespan lighting units attach to the track at any point and can be adjusted to operate on either track circuit. Not intended for use with a power cord or a convenience receptacle adapter. Magnetic and electronic transformers require different dimmer controls. Use the proper control device on the track. Caution should be used when operating dimming controls on 3 wire circuiting (the neutral conductor may overload). For additional information on dimming, call 1-800-833-3664. All wiring must be in accordance with National and Local Codes. Labels I.B.E.W.,CE Mechanical Track units plug together and lock securely to prevent accidental separation. Track units can be field cut. Finish All painted finishes are baked enamel. Mounting Track may be surface mounted to ceilings or walls. The track may be stem mounted. The track is not intended to be cable mounted. The track can also be recessed, see Specification Sheet 7515. Electrical U.S. Patent Nos. 4,096,349; Other Patent Pending Job Information Type: Job Name: Cat. No.: Lamp(s): Notes: Two circuits individually controllable, rated 16 amps, at 220 - 240 volts 50 Hz per track circuit (16 amps total for the two circuits), when supplied by a 220/240 volt, 50 Hz, single phase 3-wire branch circuit with a grounded neutral. The track 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • 0408 Lightolier is a Philips group brand Advent Lytespan® 1 and 2 Circuit Track 61XMCE Page of 3 Track Mounting and Power Feed Systems Track Mounting Clips Furnished with track: 2 clips per 2m track, 3 clips per 3m and 4m track units. Attaches to track at any point. Clip is nylon coated. White clip supplied with white track, and aluminum, black clip with black track. Spaces track from ceiling. Live End Energizes Track from the beginning of a run. It is included with Individual Track Units. Use with plain track units. 6148ALCE Matte Aluminum 6148BKCE Matte Black 6148WHCE Matte White Not recommended for wall mounting. 56451WH Matte White 56451BK Matte Black 114.3 mm 60.3 mm Set of 10 Direct Mounting Toggle bolts and nylon insulators are furnished with Track, two per 2m track, three per 3m and four per 4m track. Mount through existing holes in track. Top of track sits flush to mounting surface. Recommended for wall and ceiling mounting. Toggle Bolt Nylon Spacer Screw Grid Ceiling Mounting Clips Square Edge Panels and 14.827mm-23.812mm T-Bars Clip is supplied assembled. Mounts onto T-Bars by rotating clips. Use two per 2m track, three per 3m, and four per 4m track. 6089 (9) Clips In-Line Connector Permits power feed between track units in a straight run of track. The In-Line Connector is polarized and pre-wired. KO permits direct feed with electrical connector. 6154ALCE Matte Aluminum 6154BKCE Matte Black 6154WHCE Matte Aluminum Track Plastic Cover Mini-Coupler Used to connect two pieces of track together mechanically and electrically. Power cannot be fed to the Mini-Coupler. 6149ALCE Matte Aluminum 6149BKCE Matte Black 6149WHCE Matte White T-Runner Square Edge Panel 14.3 - 23.8mm Regressed Edge Panels and 14.287mm23.812mm T-Bar Clip is supplied assembled. Mounts easily onto T-Bars by rotating clips. Use two per 2m track, three per 3m, and four per 4m track. 6087 (9) Clips Wiring Diagram (3) wire two circuit 220/240, 50Hz single phase with grounded neutral. Maximum total track load (circuit 1 + circuit 2) = 16 amps. Switches BR 240V T-Runner BL 240V BK Regressed Edge Panel 14.3 - 23.8mm 8 - 10.3mm Slotted Grid Ceilings such as Donn Fineline and Chicago Metalic Ultraline 3500 and 3600.Use two per 2m track, three per 3m, and four per 4m track. 6088 (9) Clips Switches 8mm 14.287mm Lightolier is a Philips group brand Neutral Circuit2 Track Circuit 1 BR Neutral BL Job Informationv 3.175 - 6.35mm Circuit 1 220/240 50Hz single branch circuit, 16 amp supply. Maximum load, 16 amps distributed between track circuits. 240V Slotted Grid Runner Track Circuit2 Type: 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • 0408 Advent Lytespan® 1 and 2 Circuit Track 61XMCE Page of 3 Track Mounting, Power Feed Systems and Mounting Patterns Variable Angle Connector The Variable Angle Connector is pre-wired and polarized. Connector will accept an M20 (3/8" or 1/2") electrical fitting. (Use Locknut from Cast Plug or 3/8" or 1/2" fitting.) Connector flexes in all directions. 6153ALCE Matte Aluminum 6153BKCE Matte Black 6153WHCE Matte White 11-3/4" Direct Feed into Connectors The Live End, “L”, ”T”, “X”, In-Line & Variable Angle Connectors will accept an M20 (3/8" or 1/2") electrical fitting. Does not require a separate power feed kit. M20 (3/8" or 1/2") Connector (by others) Cast Plug Track Unit Locknut Live End Live End Cover 0-90 Wall Inside Corner 1/2" 14 Thread, Integral with Live End Track Unit Wall Outside Corner Live End M20 (3/8" or 1/2") Fitting, 3/8" recommended (by others). Note: Use M20 locknut (not shown) with M20 Fitting (by others). No locknut needed with 3/8" or 1/2" fitting. Ceiling to Wall Power Extension Connector Replaces Dead End Cover at end of track to permit power continuity around structural obstacles to another track section. Accepts same power feed-in kits as Live End. 6146ALCE Matte Aluminum 6146BKCE Matte Black 6146WHCE Matte White Power Extension Connector Neutral Track (Typ) Neutral 6151XXCE1 External Right Beam Jump Track Track Wall Neutral Power Extension Connector Neutral Jump (Conduit) Track "T" Connector The "T" connector is polarized and pre-wired. Used to make "T" pattern with track. (See fig. 1) 12 ga. copper jumper wires supplied to make all necessary connections. KO permits direct feed with electrical connector. 6151**CE1 External Right AL 6151**CE2 External Left AL 6151**CE3 Internal Right AL 6151**CE4 Internal Left AL **Finishes: AL Matte Aluminum BK Matte Black WH Matte White 6151XXCE4 Internal Left 5-1/2" "X" Connector The "X" connector is not pre-wired or polarized. Used to make "X" pattern with track. 12ga. copper jumper wires supplied to make all necessary connections. KO permits direct feed with electrical connector. 6152ALCE Matte Aluminum 6152BKCE Matte Black 6152WHCE Matte White Neutral Through Wall or Column M20 (3/8" or 1/2") Connector 3-11/32" 6151XXCE2 External Left Neutral Over Beam or Through Beam M20 (3/8" or 1/2") Connector "L" Connector The "L" connector is polarized and pre-wired. It may be rotated for right angle or left angle turn. KO permits direct feed with electrical connector. 6150ALCE Matte Aluminum 6150BKCE Matte Black 6150WHCE Matte White Fig. 1 6151XXCE3 Internal Right 5-1/2" View from Floor Track Power Extension Connector Power Extension Connector Wall Job Informationv Type: 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • 0408 Lightolier is a Philips group brand
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Instance ID : uuid:905dee8e-c965-4de7-930f-db58cc0dc9a9 Document ID : adobe:docid:indd:0f399627-779a-11dc-bc3c-9c150f753424 Rendition Class : proof:pdf Derived From Instance ID : 50e62362-71c6-11dc-91b6-b539ffd96e12 Derived From Document ID : adobe:docid:indd:f493b613-7919-11da-84bd-91fb4a2243da Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:EC53CA25E2D811DC949B832A142B6A6B, uuid:94A46908025D11DD9369DF854B19A767, uuid:94A46907025D11DD9369DF854B19A767, uuid:94A46909025D11DD9369DF854B19A767 Manifest Reference Document ID : uuid:03999C57984011DCADCA864553CF31D5, uuid:03999C5F984011DCADCA864553CF31D5, uuid:72DA639698F311DC80CFD504C5133C0F, uuid:9DD8E782F65A11DC80E0CEA6BF0C74C2 Create Date : 2008:04:02 16:06:28-04:00 Modify Date : 2008:04:04 09:50:30-04:00 Metadata Date : 2008:04:04 09:50:30-04:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8927 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Has XFA : No Page Count : 3 Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools