Lightolier C3Mrw Users Manual

: Lightolier Lightolier-C3Mrw-Users-Manual-572178 lightolier-c3mrw-users-manual-572178 lightolier pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Calculite® Evolution Lensed Adjustable Accent  C3MRW

Spec. Sheet
C3MRW

Page  of 2

3" Aperture, MR16 (12V)

£ÓÊÊxÉn¸
­ÎÓ£““®

11

x¸Ê­£ÓǓ“®

Non-IC Frame:
œ˜‡
\
C3LV

Î6

Î6
£
C3LVE1

Î6
Ó
C3LVE2

™ÊxÉn¸
­Ó{x““®

7 3

8

10 9

Vertical Adjustment
1" (25mm) to
2 3/4" (70mm)

5 1/2"
(140mm)

x¸Ê­£ÓǓ“®

5"
(127mm)
Plus Ceiling
Thk.

£{ÊÎÉn¸
­ÎÈx““®
£äÊ£Én¸
­ÓxǓ“®

£{ÊxÉn¸
­ÎÇӓ“®

IC
AirSeal Frame: ££ÊÎɣȸ

Ê
ˆÀ-i>\
­Ón{““®
C3AICLV

Î

6Ê
C3AICLVE1

3 3/8" (86mm) Dia.

Polished Flange	
C3MRW CLP	
C3MRW CCDP	
C3MRW CCZP	
C3MRW GDP	
N/A	
C3MRW BKP	

Flangeless 	
C3MRWCLFT
C3MRW CCDFT
C3MRW CCZFT
C3MRW GDFT
C3MRW WHFT
C3MRW BKFT

1.	 Trim Kit Aperture Cone: Low brightness; 0.040" aluminum, anodized; keyed
to lamp support assembly for true aiming of lamp to prevent incorrect installation of cone. Hinged, and snaps on for easy tool-less installation. Capitive
clear glass shield during relaming. Self-flange in painted white or aperture
matching polished flange. Flangeless trim used with Plaster Trim Ring accessory. Interchangeable with other 3" Evolution trims.
2.	 Trim Kit Vertical Adjustment Mechanism: Die-cast aluminum. Built-in
aperture shield blocks view into fixture. Provides 0° - 45° vertical tilt up to
1" thick ceiling, less in thicker ceilings; lockable. 30° maximum tilt in ceilings 1.25" - 2" thick. Patented EZ-Aim Helical Drive System provides fast and
accurate hot aiming with Philips screwdriver.
3.	 Horizontal Adjustment Mechanism: Die-form steel ring, matte black finish. Provides 362° horizontal stop, lockable with Philips screwdriver.
4.	 Lamp Support: Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 2" diameter
accessories.
5.	 Cover Glass: High temperature, soft focus lens.
6.	 Thick Ceiling Ready Brackets: Die-form steel, matte black finish. Adjust
trim kit vertically to accommodate up to 2" thick ceiling, lockable.
7.	 Lampholder: Procelain bi-pin socket. Pre-wired with No.18 AWG Teflon leads.
8.	 Frame Vertical Adjustment Mechanism (C3LV): Accommodates mounting
to virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking features secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below inside fixture.
9.	 Mounting Bars (C3LV): Galvanized steel, 0.048"; pre-installed telescoping
bars extend from 20" to 30" long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplified installation in 24" O.C. grid systems. Attaches to steel
or wood joists without accessories.
10.Transformer: Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-voltage, core & coil. Note: Magnetic not recommended for residential or noise
sensitive areas. Electronic: 120V or 277V 50/60 Hz., regulated lamp voltage,
HPF, EMI and circuit protections, thermal auto-reset, quiet operation.

2" (59mm) Max.
Ceiling Thk.

1

4" (102mm) Dia.

C3LV
Flangeless Trim with
Plaster Ring Accessory

™¸Ê­Óә““®

Ceiling Cutout: 3 1/2” (130mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
-«iV°Ê-…iiÌ

Î,7
Trim Kit 				
White Flange	
C3MRW CLW	
C3MRW CCDW	
C3MRW CCZW	
C3MRW GDW	
C3MRW WHW	
C3MRW BKW	

2 7/8" (73mm) Dia.

1/2"
(13mm)

ÓÓÊÎÉn¸Ê
­xÈn““®

Features

4 5

£{ÊÎÉn¸
­ÎÈx““®

Non-IC AirSeal Frame:
œ˜‡
Ê
ˆÀ-i>\
C3ALV

Î
6

Î
6
£Ê
Î
6
Ó
C3ALVE1
C3ALVE2

Cone Finish	
Clear	
Comfort Clear Diffuse	
Champagne Bronze	
Gold	
Matte White	
Specular Black	

2 6

9"
(229mm)
9 1/2"
(242mm)
1/2" (13mm)

Frame-In Kit	

C3AICLV

Lamp*

C3LV	
Non-IC	
Magnetic 120/277V	 42W-65W MR16 (12V)
C3LVE1	
Non-IC	
Electronic 120V	
20W-65W MR16 (12V)
C3LVE2	
Non-IC	
Electronic 277V	
20W-65W MR16 (12V)
C3ALV	
Non-IC AirSeal®	 Magnetic 120/277V	 42W-65W MR16 (12V)
C3ALVE1	
Non-IC AirSeal®	 Electronic 120V	
20W-65W MR16 (12V)
C3ALVE2	
Non-IC AirSeal®	 Electronic 277V	
20W-65W MR16 (12V)
C3AICLV	
IC AirSeal®	
Magnetic 120V	
20W-50W MR16 (12V)
C3AICLVE1	 IC AirSeal®	
Electronic 120V	
20W-50W MR16 (12V)
Note: Magnetic not recommended for residential or noise sensitive areas.

Features (cont.)

11.	Frame-In Kit: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal - Insulation must be kept 3" away from any parts
of the luminaire and must not be placed above luminaire in a manner which
will entrap heat. IC AirSeal - Luminaire may be in direct contact with thermal
insulation.

Labels

U.L. (Suitable For Wet Locations), I.B.E.W.; U.S. & Foreign Patents Pending
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W for
ceiling thickness greater than 1” (up to 2”).

Options and Accessories

2” dia. Color Filters/Specialty filters: See ADF2/AF2 specification sheets
2” Dia. Louver: AL2HC
Plaster Trim Ring (use with flangeless trim): CA3FMR
Chicago Plenum: Consult Factory

Job Information	

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte company

www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • F1107

Calculite® Evolution Lensed Adjustable Accent  C3MRW

Spec. Sheet
C3MRW

Page  of 2

3" Aperture, MR16 (12V)
(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam. Footcandles are
based on photometry with luminaire,
with lamp aimed at 30° from vertical.

CANDLEPOWER Distribution	

375
60°
750

1125

1500

30°

CANDLEPOWER Distribution	

875
60°
1750

2625

3500
30°

CANDLEPOWER Distribution	

375
60°
650

1025

1300
30°

50W mr16 - 15° Spot
ANGLE	 WALL
0	
243
5	
376
10	
415
15	
568
20	
1144
25	
2456
30	
3348
35	
2561
40	
968
45	
239
50	
59
55	
18
60	
2
65	
0
70	
0
75	
0
80	
0
85	
0
90	
0

AIMED 30° TOWARD WALL

30° Aiming Angle
Horizontal Surface

REFLECTOR TRIM: C3MRWCLW
GE HALOGEN LAMP
120V ELECTRINIC TRANSFORMER
LUMEN RATING = 750 LMS
CBCP= 3348 cd
BEAM ANGLE = 15°
CERTIFIED TEST REPORT NO. 2784FR
DATE: Oct 31, 2004
**TEST-LITE**

D	
6'	
8'	
10'	
12'	
15'	

C	
3.5'	
4.6'	
5.8'	
6.9'	
8.7'	

FC	
61	
34	
22	
15	
10	

L	
2.1'	
2.8'	
3.5'	
4.2'	
5.3'	

W
1.8'	
2.4'	
3.0'	
3.6'	
4.6'	

30° Aiming Angle
Vertical Surface
D	 C	
2'	 3.5'	
3'	 5.2'	
4'	 6.9'	
6'	 10.4'	
8'	 13.9'	

FC	
135	
61	
34	
15	
9	

L	
2.2'	
3.3'	
4.4'	
6.7'	
8.9'	

W
1.1'	
1.6'	
2.1'	
3.2'	
4.2'	

50W mr16 - 25° Narrow Flood
ANGLE	 WALL
0	
281
5	
420
10	
546
15	
801
20	
1063
25	
1298
30	
1464
35	
1368
40	
1012
45	
657
50	
384
55	
168
60	
47
65	
0
70	
0
75	
0
80	
0
85	
0
90	
0

AIMED 30° TOWARD WALL

30° Aiming Angle
Horizontal Surface

REFLECTOR TRIM: C3MRWCLW
GE HALOGEN LAMP
120V ELECTRINIC TRANSFORMER
LUMEN RATING = 800 LMS
CBCP= 1464 cd
BEAM ANGLE = 30°
CERTIFIED TEST REPORT NO. 2785FR
DATE: Oct 31, 2004
**TEST-LITE**

D	
6'	
8'	
10'	
12'	
15'	

C	
3.5'	
4.6'	
5.8'	
6.9'	
8.7'	

FC	
27	
15	
10	
7	
4	

L	
4.4'	
5.9'	
7.3'	
8.8'	
11.0'	

W
3.7'	
5.0'	
6.2'	
7.4'	
9.3'	

30° Aiming Angle
Vertical Surface
D	 C	
2'	 3.5'	
3'	 5.2'	
4'	 6.9'	
6'	 10.4'	
8'	 13.9'	

FC	 L	
75	 5.5'	
33	 8.2'	
19	 10.9'	
8	
6.4'	
5	 21.9'	

W
2.1'	
3.2'	
4.3'	
6.4'	
8.6'	

50W mr16 - 40° Flood
ANGLE	 WALL
0	
246
5	
319
10	
420
15	
727
20	
1079
25	
1250
30	
1276
35	
1221
40	
1120
45	
932
50	
643
55	
305
60	
89
65	
13
70	
0
75	
0
80	
0
85	
0
90	
0

AIMED 30° TOWARD WALL

30° Aiming Angle
Horizontal Surface

REFLECTOR TRIM: C3MRWCLW
GE HALOGEN LAMP
120V ELECTRINIC TRANSFORMER
LUMEN RATING = 800 LMS
CBCP= 1276 cd
BEAM ANGLE = 36°
CERTIFIED TEST REPORT NO. 2786FR
DATE: Oct 31, 2004
**TEST-LITE**

D	
6'	
8'	
10'	
12'	
15'	

C	
3.5'	
4.6'	
5.8'	
6.9'	
8.7'	

FC	 L	
W
26	 5.4'	 4.5'	
15	 7.2'	 6.0'	
9	
9.0'	 7.5'	
7	 10.8'	 9.0'	
4	 13.5'	 11.3'	

Job Information	
Lightolier a Genlyte company

30° Aiming Angle
Vertical Surface
D	 C	
2'	 3.5'	
3'	 5.2'	
4'	 6.9'	
6'	 10.4'	
8'	 13.9'	

FC	
85	
39	
22	
10	
6	

L	
W
7.6'	 2.6'	
11.4'	 3.9'	
15.2'	 5.2'	
22.8'	 7.8'	
30.4'	 10.4'	

Type:

www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • F1107



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Instance ID                     : uuid:61cbc9a8-5a85-4e78-99b2-c33128dc874f
Document ID                     : adobe:docid:indd:f819151a-f573-11db-9db0-eafc0c319ab4
Rendition Class                 : proof:pdf
Manifest Link Form              : ReferenceStream
Manifest Placed X Resolution    : 72.00
Manifest Placed Y Resolution    : 72.00
Manifest Placed Resolution Unit : Inches
Manifest Reference Instance ID  : uuid:458984599E6F11DC9612A9340742AADC
Manifest Reference Document ID  : uuid:458984549E6F11DC9612A9340742AADC
Create Date                     : 2008:01:04 15:32:48-05:00
Modify Date                     : 2008:01:09 13:55:18-05:00
Metadata Date                   : 2008:01:09 13:55:18-05:00
Creator Tool                    : Adobe InDesign CS2 (4.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 11881 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0.5)

EXIF Metadata provided by EXIF.tools