Lightspeed Technologies LS955 955 User Manual 955 Access Manual MN0513US01 0 indd

Download:
Mirror Download [FCC.gov]
Document ID	2720437
Application ID	CGS8ADRA3VhsQjWKKHAkDg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	257.89kB (3223609 bits)
Date Submitted	2015-08-20 00:00:00
Date Available	2015-08-20 00:00:00
Creation Date	2015-06-02 11:08:02
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-06-02 11:08:09
Document Title	955_Access_Manual_MN0513US01-0.indd
Document Creator	Adobe InDesign CC (Macintosh)

Classroom Audio System
MICROPHONE
POWER
AUDIO IN
TONE
AUDIO OUT
MIN
MAX
MIN
MAX
TREBLE
BASS MIN
MAX
User Manual
Preliminary
TABLE OF CONTENTS
SECTION 1:
Overview
Important safety instructions
System components and unpacking
Standard components & Optional accessories
Front panel controls & indicators
Rear panel controls & connections
Flexmike controls and connections
SECTION 2:
Daily Operation
10
11
12
12
13
17
Charging the Flexmike
Operating the Flexmike
Using Flexmike as wireless audio link
Output to Assistive Listening Device (ALD)
Audio integration
Daily Operation Instructions
SECTION 3:
Optional
Accessories
18
19
20
21
23
24
Sharemike: Controls & Connections
Sharemike: Charging
Sharemike: Initial Set-up
Media Connector controls and connections
Using the Media Connector
Flexcat audio pods for small group instruction
SECTION 4:
Maintenance and
Troubleshooting
25
27
28
Battery replacement
Troubleshooting
Tips to obtain optimal audio performance
SECTION 6:
29
Warranty, Safety
30
and Specifications 34
Warranty statement
Safety warnings and certifications
System specifications
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use the apparatus near
water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation
openings. Install in accordance
with the manufacturer’s
instructions.
8.
Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9.
Do not defeat the safety purpose
of the polarized or groundingtype plug. A polarized plug
has two blades with one wider
than the other. A groundingtype plug has two blades and
a third grounding prong. The
wide blade or the third prong is
provided for your safety. If the
provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
10. Protect the power cord from
being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/
accessories specified by the
manufacturer.
12. Use only with a cart,
stand, tripod, bracket or
table specified by the
manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has been
spilled or objects have fallen into
the apparatus, the apparatus
has been exposed to rain or
moisture, does not operate
normally, or has been dropped.
15. When the mains plug or
appliance coupler is used as the
disconnect device, it shall remain
readily operable.
16. Please keep the unit in a good
ventilation environment.
17. WARNING: To reduce the risk
of fire or electric shock, do not
expose this apparatus to rain or
moisture.
18. Apparatus shall not be exposed
to dripping or splashing and no
objects filled with liquids, such
as vases, shall be placed on the
apparatus.
19. Warning - battery pack shall not
be exposed to excessive heat
such as sunshine, fire or the like.
SYSTEM COMPONENTS AND UNPACKING
The standard configuration of the 955 Access will contain:
955 Access and Power
Supply
MICROPHONE
POWER
AUDIO IN
TONE
AUDIO OUT
MAX
MIN
MAX
TREBLE
BASS MIN
MAX
2. Set Up & Use /
Daily Operation
MIN
3. Optional Accessories
OVERVIEW
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
SECTION 1:
1. Overview
Flexmike
Classroom
Microphone
Flexmike Wall
Charger & Charging
Cable
PLEASE NOTE: The 955 Access and any wireless components (microphones,
Media Connector, pods) are registered together at the factory and are labeled as
such with ID numbers. Please keep all components together as a system. Moving
them from one system or room to another will result in the need to re-register
them to function.
Additional system labels are included in the back of this manual should you add
components, or if one of your original components should need to be replaced.
Speakers
Systems can be configured with a variety of different speaker types, including the following:
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
SYSTEM COMPONENTS AND UNPACKING CONT’D
TCQ (x 1)
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
DRQ (x 4)
4jCS (x4)
WMQ (x 4)
(plenum rated)
NH2APK
AA NiMH rechargeable battery pack for Sharemike,
one per Sharemike
Charging cable for Sharemike
Media Connector with Access
USBDC
MCA
USB2-NA
Transmitter wall charger, power supply, U.S. and
Canada
USB Type A-Micro B power cable for Media
Connector
International transmitter charging adaptor
5V charging power supply
USB-MCB
USB3DC
5V-1.0-_
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
Flexcat for small group instruction*
Handheld microphone with battery pack
NH2.4V
3. Optional Accessories
Optional Accessories
FCAD-4
SM
USB-MCB
AD-USB3DC
FM
2. Set Up & Use /
Daily Operation
FL
SPEAKERS
Wireless audio system
24V/2.5A power supply, U.S. and Canada
24V/2.5A power supply, specify country
Transmitter wall charger, power supply, U.S. and
Canada
USB Type A-Micro B charging cable for Flexmike
International charging/power adaptor
Flexmike classroom microphone with battery pack
andlanyard
AA NiMH rechargeable battery pack for Flexmike,
one per Flexmike
Flexmike lavaliere cord
As ordered.
1. Overview
Standard Components
955 Access
24V-2.5A-NA
24V-2.5A-__
USB2-NA
*For further information on Flexcat for small group instruction, please visit www.lightspeed-tek.com
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
3. Optional Accessories
2. Set Up & Use /
Daily Operation
FRONT PANEL CONTROLS & INDICATORS
MICROPHONE
POWER
AUDIO IN
TONE
AUDIO OUT
MIN
MAX
MIN
MAX
TREBLE
BASS MIN
MAX
1. POWER LIGHT: This light will turn blue when power is on.
2. POWER BUTTON: Press and hold this push button to turn the system
power on or off.
3. MICROPHONE VOLUME CONTROL: Controls the volume level of the
microphones.
4. AUDIO IN VOLUME CONTROL: Controls the volume level of the audio
sources connected to the audio inputs on back of the 955 Access.
1. Overview
5. TONE CONTROL: Adjusts the audio tone adding more bass or treble for
a more rich or more crisp tone.
6. AUDIO OUT VOLUME CONTROL: Controls the volume level of the audio
output
7. AUDIO OUTPUT JACK: 3.5mm stereo connector for connecting to an
assisted listening device (ALD) or to a computer for recording.
8. MIC 1 & MIC 2: Microphone link and registration indicators.
a. Solid green indicates an audio link has been established.
b. Flashing amber indicates registration is in process.
9. SYSTEM ID LABEL: On bottom of unit (not shown) to identify it with
registered components.
5. Warranty, Safety
& Specifications
REAR PANEL CONTROLS AND
CONNECTIONS
4. Maintenance &
Troubleshooting
AUDIO INPUTS
REGISTER
ADJ
PAGEFIRST INPUT
1. REGISTRATION: Press this button
if there is a new component, such
as a microphone, to be registered.
2. AUDIO INPUTS: 3.5mm stereo
connectors for connecting
classroom audio sources to be
played through audio system.
3. PAGING ADJ: Use the ADJ
control to adjust the sensitivity of
PageFirst if needed.
4. PAGEFIRST INPUT: Connect the
input from the optional PageFirst
sensor here when interfacing with
a building’s paging system.
3. Optional Accessories
5. SPEAKER OUTPUTS: This
euro-block connector is used to
connect the 955 Access to the
loudspeaker(s). Up to two 8-ohm
speakers can be connected to
each output.
Note: Wiring to these terminals
should follow the Class 2 wiring
methods as outlined in the
National Electric Code.
6. DC POWER: Plug the power
supply (24V/2.5A) into this jack.
2. Set Up & Use /
Daily Operation
DC INPUT
24V/2.5A
1. Overview
+ 1 + 2 SPEAKER OUTPUTS
5. Warranty, Safety
& Specifications
FLEXMIKE CONTROLS AND CONNECTIONS
2. Set Up & Use /
Daily Operation
1. Overview
11
3. Optional Accessories
4. Maintenance &
Troubleshooting
10
1.
POWER/MUTE SWITCH: press and hold to power on, press to
mute, press and hold to power off.
2.
MIC 1 STATUS: lighted to indicate microphone is registered as
MIC 1
• Blue: solid = normal operation; Blue: flashing = linking in
progress
• Red: solid = muted; Red: flashing = muted while linking in
progress
3.
MIC 2 STATUS: when using a second microphone, this LED is
lighted to indicate microphone is registered as MIC 2 (same
behavior as MIC 1 status light above)
4.
EARBUD CONNECTION*: connect the earbud for monitoring
(*for use with Flexcat Pods only)
5.
CHARGING/LOW BATTERY INDICATOR: lights red when
charging, green when fully charged. When in operation, turns red
to indicate low battery.
6.
MICROPHONE VOLUME UP/DOWN
7.
AUDIO INPUT: connect audio source to send to 955 Access
8.
LANYARD INTERFACE: insert the lanyard into this hook to wear
the Flexmike.
9.
BATTERY DOOR: remove the battery door to replace the
rechargeable battery pack
10. REGISTRATION: (inside battery compartment - not shown) only
used when adding or replacing Flexmike.
11. SYSTEM ID LABEL
10
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
DAILY OPERATION
1. Overview
SECTION 2:
11
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
3. Optional Accessories
2. Set Up & Use /
Daily Operation
1. Overview
1. CHARGING THE FLEXMIKE
Before use, the Flexmike should be charged. It will take 8-9 hours for the
Flexmike to obtain a full charge. A fully charged Flexmike will last for up to 8
hours of use. If microphones are used daily, they should be charged each night
– microphones can be left charging constantly for up to 2 weeks without causing
degradation to battery life.
When plugged into a charger, a red light on the Flexmike indicates the battery
pack is charging. A green light indicates that charging is complete and a full
charge has been reached. See Troubleshooting section for more information.
Replacement NiMH battery packs may only be purchased through Lightspeed
Technologies (part # NH2.4V). Do not attempt to charge with other battery packs.
They can overheat and expand creating a significant hazard and damaging the
microphone (this is not covered by warranty).
1. Plug wall charger into an
electrical outlet.
2. Plug the USB charging cable(s)
into the wall charger.
3. Plug the micro USB end of the
charging cable into USB port on
the bottom of the Flexmike.
4. The charging light on top of hte
Flexmike will turn red to indicate
charging is in progress.
5. When the Flexmike is fully
charged, the light on the mic will
change to green.
6. Hang the Flexmike on the lanyard
opposite the magnetic clasp.
12
Teacher
5. Warranty, Safety
& Specifications
2. OPERATING THE FLEXMIKE
Once the Flexmike is charged, follow these steps to set it up for use.
4. Maintenance &
Troubleshooting
1. Remove the Flexmike from the
charging cable and put it on by
connecting the magnetic clasps
behind your neck. The Flexmike
will automatically power on and
mute when it is removed from the
charger. This will automatically
power on the 955 Access as well.
3. Optional Accessories
2. The microphone volume on the
Flexmike is set at the factory to the
mid point.
2. Set Up & Use /
Daily Operation
3. While speaking in a normal voice,
fine-tune the microphone volume
on the front of the 955 Access
up or down. Proper volume level
should be as follows:
• Your voice should be clearly
heard by another person on the
other side of the room.
• You should barely be able to
hear your own voice.
REMEMBER: This equipment
supplements the user’s voice so they
are able to speak in a conversational
tone. Having the volume set too high
will result in feedback and listener
fatigue.
1. Overview
• There should not be any audio
“feedback” or squealing
outside of 2-3 feet (if there is,
turn the volume down slightly).
MICROPHONE
POWER
AUDIO IN
TONE
AUDIO OUT
MIN
MAX
MIN
MAX
TREBLE
BASS MIN
MAX
4. Once initial volume level is set,
walk around the room and listen
for overall audio quality.
5. If further fine-tuning is required,
you may need to adjust the Tone
Control on the front of the 955
Access.
13
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
The Flexmike includes a 3.5mm audio input jack to
connect to an audio source like a laptop or MP3 player.
The Flexmike will transmit the audio signal to be played
through the system.
If your system includes two Flexmikes, you can use one
mic for instruction and the second mic to transmit audio
through the system.
1. Plug your external audio
equipment (for example, laptop),
into the input on the Flexmike
labeled “INPUT” using a 3.5mm
patch cable (not included).
AUDIO
INPUT
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
3. USING FLEXMIKE AS WIRELESS
AUDIO LINK
14
AUDIO
OUTPUT
1
2.
Determine
the size and type
of audio input jack on the
device as many manufacturers’
products differ in connector
size and shape. Many Personal
FM transmitters require a 3.5
mm to 3.5 mm patch cable
(part# MSC3535, not included).
MIN
MAX
TREBLE
BASS MIN
MAX
3. Optional Accessories
MAX
3. Connect a patch cable from
the personal FM’s microphone
jack or AUX input to AUDIO
OUT jack on the 955 Access:
MICROPHONE
POWER
TONE
AUDIO OUT
MIN
4. With the amplifier and ALD
turned on, speak into the
Flexmike and slowly adjust
the corresponding volume
control on the amplifier until
the appropriate audio level is
obtained in the Personal FM
receiver.
AUDIO IN
2. Set Up & Use /
Daily Operation
MIN
AUDIO OUT
4. Maintenance &
Troubleshooting
TONE
MAX
MIN
MAX
TREBLE
BASS MIN
MAX
1. Overview
POWER
1. Turn the AUDIO OUT
volume control on the front
panel
all the way down
(fully
MICROPHONE
AUDIO IN
counterclockwise).
5. Warranty, Safety
& Specifications
4. OUTPUT TO PERSONAL ASSISTIVE
LISTENING DEVICE (ALD)
5. It may be necessary to adjust
the volume on the Personal
FM receiver to achieve
appropriate volume level.
15
5. Warranty, Safety
& Specifications
DAILY OPERATION
INSTRUCTIONS
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
1.
2.
1. Overview
3.
At start of day, unplug the microphone from the
charging cable and put on.
•
The microphone will default to the Mute position,
the status will turn to red.
•
Place the microphone around your neck.
•
Press the power/mute button, the light will turn
blue, indicating the microphone is active and ready
to use.
•
Adjust volume with the UP/DOWN buttons if
necessary.
•
If Flexmike needs to be powered down for some
time, press and hold the power button. To power
Flexmike again, press and hold the power button
until the blue light begins to blink.
Private conversations.
•
Mute the Flexmike during private conversations
by momentarily pressing the power button. When
muted, the blue light turns red.
•
When conversation is over, momentarily press the
power button again to unmute the Flexmike.
End of day.
•
Remove the Flexmike from around your neck.
•
Plug the Flexmike into the charging cable and
ensure the wall charger is plugged in to an outlet.
•
The Flexmike will stay powered on during charging,
but will automatically be muted.
•
It is not necessary to turn off the 955 Access as it
will automatically power down after 2 hours without
activity.
•
If you do want to manually power it down, press
and hold the power button on the front of the 955
Access. If the 955 Access is powered down, then
when Flexmike is removed from charging the next
day, it will automatically power the 955 Access on.
MICROPHONE
POWER
MIN
16
AUDIO IN
TONE
AUDIO OUT
MAX
MIN
MAX
TREBLE
BASS MIN
MAX
Power /
Mute
OPTIONAL
ACCESSORIES
3. Optional Accessories
SHAREMIKE: CONTROLS & CONNECTIONS
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
SECTION 3:
2. Set Up & Use /
Daily Operation
2. MIC 2 LIGHT: This light indicates operation status when Sharemike is registed
as MIC 2 (Standard)
• Blue: solid = normal operation; blinking - link in process
1. Overview
1. POWER BUTTON
• Red: solid = muted
3. MIC 1 LIGHT: This light indicates battery/charging status when Sharemike is
registered as MIC 2
• Red: flashing = low battery
• Red: solid = charging
• Green: solid = charging complete
NOTE: The functions of these lights are reversed when a Sharemike is registered as MIC 1.
4. AUDIO INPUT: plug a laptop, MP3 player or other audio device into this jack
to wirelessly transmit the audio signal to be played through the system.
5. REGISTRATION BUTTON: Located in the battery compartment, only used
when adding or replacing Sharemike.
6. CHARGER INPUT: Plug the charging cable from the Sharemike charger into
this jack.
7. SYSTEM ID LABEL
17
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
1. Make sure the charger is plugged
into a wall outlet. Connect one
end of the charging cable into
the jack labeled CHARGE on the
bottom of the Sharemike.
2. Plug the other end into the USB
jack of the wall charger.
3. If the Sharemike is registered
as MIC 2, the MIC 1 light on the
microphone will glow red to
indicate charging.
4. Leave the Sharemike plugged in
overnight (8-10 hours) to obtain
a full charge. The light will turn
green when charging is complete.
5. If Sharemike is registered as MIC 1,
low battery and charging indicator
will be the MIC 2 light.
6. During charging the blue light will
stay on.
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
SHAREMIKE: CHARGING
PLEASE NOTE: The Access Link and Microphone(s) are registered together
at the factory. If you have purchased a Sharemike with your Access Link,
keep all components together as a system. Moving them from one system,
or room, to another will result in the need to re-register.
18
3. Grip the barrel in the center
section.
4. While speaking in a normal voice,
increase the volume on the 955
Access MICROPHONE VOLUME
knob until your voice is barely
audible.
REMEMBER: This equipment is
designed to supplement and
distribute the user’s voice so they
are able to speak in a conversational
tone. Having the volume set too high
will result in feedback and listener
fatigue.
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
2. Turn on the Sharemike by pressing
and holding the power button until
the LED lights.
3. Optional Accessories
1. Ensure the 955 Access is on. The
blue light on the front of the 955
Access will glow.
2. Set Up & Use /
Daily Operation
SHAREMIKE: INITIAL SET-UP
This optional feature for 955 Access interfaces with an independent classroom
paging system. When the page is broadcast, all audio from the system is muted,
ensuring important school-wide messages are never missed. Please note that
PageFirst is not compatible with telephone or IP-based paging systems.
1. Overview
OPTIONAL PAGEFIRST KIT
How it works:
1. PageFirst sensor clip is hung
around a lead wire attached to
the classroom paging speaker.
2. The clip is hard-wired to the
amplifier.
3. As a page is broadcast, the
sensor clip detects the audio
signal through induction
and immediately mutes the
amplifier.
4. When the page is over, the
audio from the amplifier
returns to normal volume level.
19
MICROPHONE
POWER
MIN
AUDIO IN
MAX
MIN
5. Warranty, Safety
& Specifications
1. Overview
1. POWER LIGHT: This light will turn blue
when power is on.
2. POWER BUTTON: Press and hold this
pushbutton to turn the system power
on or off.
3. MICROPHONE VOLUME CONTROL:
Controls the volume level of the
microphones.
4. AUDIO IN VOLUME CONTROL:
Controls the volume level of the
connected audio sources.
5. AUDIO OUT VOLUME CONTROL:
Adjusts the audio signal level output
through the ALD audio output
connector.
6. AUDIO LINK LIGHT: The green light
blinks when a link is being established.
The light is solid green when the link is
established.
7. SYSTEM ID LABEL: On bottom of unit
20
MAX
AUDIO OUT
MIN
LINK
MAX
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
MEDIA CONNECTOR CONTROLS
AND CONNECTIONS
3
USB power adaptor and
charging cable
1. TONE CONTROL: Adjusts the
audio tone, adding more bass
or treble for a more rich or crisp
sounds.
2. USB POWER INPUT: Plug the
micro USB end of the power cable
into this USB port.
3. REGISTRATION PUSHBUTTON
& LIGHT: Pushing the registration
button in conjunction with the
registration button on the 955
Access will cause the two units
to synchronize as an operating
system. The registration light
stops blinking and the link light
is solid when a link is established.
This is only used when adding or
replacing a Media Connector.
4. TWO AUDIO OUTPUTS: 3.5mm
stereo jacks send audio signal
to external equipment such as a
recorder or an assistive listening
device.
5. Warranty, Safety
& Specifications
2. Set Up & Use /
Daily Operation
1. Overview
3. Optional Accessories
4. Maintenance &
Troubleshooting
MEDIA CONNECTOR CONTROLS
AND CONNECTIONS CONT’D
5. FOUR AUDIO INPUTS: Connect
standard audio devices to any
of the 3.5mm stereo inputs. A
provided cable allows connectivity
to RCA stereo outputs common on
DVD players and televisions.
21
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
3. Optional Accessories
2. Set Up & Use /
Daily Operation
1. Overview
USING THE MEDIA CONNECTOR
The Media Connector, when paired together with the system, becomes the primary
volume control for the microphones and audio sources you’ve connected.
1. Plug the micro USB end of the power cable into the USB port on the back of the
Media Connector. Plug the other end of the cable into the USB power adaptor.
Alternatively, the USB cable could be plugged into a computer for power.
2. Connect the audio source(s) to the
Media Connector using the 3.5mm
cables provided.
3. Set the audio source volume to
provide sound through the audio
system.
TONE
AUDIO OUT
AUDIO IN
USB POWER
4. Use the AUDIO IN volume control on
TREBLE
BASS
5V/1.5A
REGISTER
the front of the Media Connector to
increase or decrease the audio source
sound level.
NOTE: when a Media Connector is paired with a 955 Access, microphone volume
and tone control levels are locked out. Microphone volume and tone control
levels default to the Media Connector controls to avoid multiple control points
for the same functions.
NORMALIZING AUDIO SOURCE VOLUME LEVELS
Use the Media Connector as the master audio volume control for the classroom.
When two or more audio sources are connected, you will need to normalize
volume settings by setting all connected audio sources to the same sound level
while leaving the Media Connector AUDIO IN volume control set to its center
setting. The Media Connector is an audio mixer using a master volume control
to adjust the volume of all audio sources at once. Use the following procedure to
set audio source volumes:
1. Connect the multimedia audio sources to the Media Connector using the
3.5mm cables provided.
2. Set the AUDIO IN volume control on the Media Connector to its center
position.
3. Turn on an audio source that does not have an accessible audio level control.
(DVD, VCR player)
4. Adjust the Media Connector AUDIO IN volume control so the audio level
playing through the speaker is appropriate for the classroom.
5. Turn off the first audio source.
6. Turn on the second audio source. Use its volume control to balance the audio
output to the same audio level played through the speaker as the first source.
7. Repeat steps 5 and 6 for the remaining audio sources.
8. Now, the Media Connector’s AUDIO IN volume can be used to increase or
decrease the volume level for all audio sources as desired.
22
Video In
3. Optional Accessories
Projector
Projector
5. Warranty, Safety
& Specifications
The MCA is designed to integrate with the 955 Access and multiple
audio sources, allowing other instructional technologies to be clearly
heard throughout the classroom.
4. Maintenance &
Troubleshooting
OPTIONAL MEDIA CONNECTOR:
Audio Integration
Speaker(s)
Teacher’s
Microphone
Access
Transmission
Audio In
POWER
MICROPHONE
MIN
Video Out
Audio Out
MAX
AUDIO IN
MIN
MAX
AUDIO OUT
MIN
LINK
MAX
Media Connector
MICROPHONE
POWER
Video Out
DVD/VCR
Audio Out
2. Set Up & Use /
Daily Operation
Audio Out
VGA Out
AUDIO IN
TONE
AUDIO OUT
MIN
MAX
MIN
MAX
TREBLE
BASS MIN
MAX
1. Overview
955 Access
OTHER OPTIONAL ACCESSORIES
TK250F
Noise-canceling headset microphone
MSC3535
3.5mm to 3.5mm stereo audio cable
PFSC50
PageFirst Sensor Clip with speaker wire
23
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
3. Optional Accessories
2. Set Up & Use /
Daily Operation
•
•
•
•
Teacher monitoring of individual small groups
Direct instruction to each independent group
Student group sharing with the whole class
Reinforce and redirect group activities
If your 955 Access system was configured with Flexcat pods, please refer to
the Flexcat user guide for operation and setup instructions.
1. Overview
Flexcat is a flexible two-way communication system that can be seamlessly
added to the 955 Access classroom audio system to foster and facilitate
small group instruction. With the small group audio pods and remote,
Flexcat opens up communication and interactoin between the teacher and
student groups, including:
24
FLEXCAT AUDIO PODS FOR
SMALL GROUP INSTRUCTION
4. Maintenance &
Troubleshooting
MAINTENANCE &
TROUBLESHOOTING
BATTERY REPLACEMENT
2.
Carefully pull the battery pack
away from the Flexmike and
disconnect the cable.
3.
Connect the cable of the new
battery pack as shown and
insert the battery pack into the
compartment.
1. Overview
2. Set Up & Use /
Daily Operation
Slide the battery door open.
3. Optional Accessories
Replacement of battery pack in
Flexmike. (Part # NH2.4V)
1.
5. Warranty, Safety
& Specifications
SECTION 4:
4.
Slide the cover back on and
snap into place.
5.
Connect the Flexmike to a
charging cable and plug into
the wall charger to charge the
battery pack.
Teacher
25
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
Replacement of battery pack in
Sharemike. (Part # NH2APK)
1.
Slide the battery door open.
2.
Carefully remove the battery
pack from the Sharemike.
3.
Insert the new battery pack into
the compartment. Ensure proper
polarity is observed.
4.
Slide the cover back on and
snap into place.
5.
Connect the Sharemike to a
charging cable and plug into
the wall charger to charge the
battery pack.
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
BATTERY REPLACEMENT, CONT’D
26
PROBLEM: Most Problems are related to low battery power.
SOLUTION: Battery Check
• Confirm batteries are charged each night. A blinking red light on the power
button indicates a low battery.
• Confirm proper batteries are used. The Flexmike requires the Lightspeed
NH2.4V rechargeable battery pack. The Sharemike requires the Lightspeed
BA-NH2APK rechargeable pattery pack.
• Make sure the microphones obtain a full charge. A full charge takes 8-9 hours.
• When plugging the charging cable into the transmitter, ensure the red
charging light turns on. The green light will turn on when a full charge is
reached.
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
Note: Most problems are directly related to low battery power. Please run
through the “Battery Check” items first. For remaining troubleshooting, use
known good, fully-charged batteries.
3. Optional Accessories
TROUBLESHOOTING
SOLUTION: Follow these steps to ensure the system is ready to use.
• Ensure the power button on the microphone is turned on. Once turned on,
the blue light should begin blinking.
• Power the microphone off, then on again after a few seconds. Wait for up to
30 seconds for the blue light to turn solid, indicating READY for operation.
2. Set Up & Use /
Daily Operation
PROBLEM: Microphone doesn’t indicate a “Ready” signal (solid blue or red light)
SOLUTION: Follow these steps to eliminate low volume or feedback.
• Check microphone volume level on the 955 Access. If the volume is too high,
feedback will occur. Adjust accordingly.
1. Overview
PROBLEM: Low Volume or Feedback
• Check input volume level on the 955 Access. If the volume is too high,
feedback will occur. Adjust accordingly.
• Adjust the volume level on the Flexmike.
PROBLEM: No Sound From speaker and wireless components.
SOLUTION: Follow these steps to produce sound from 955 Access.
• Confirm that the blue POWER light located on the front panel of the 955
Access is on.
• Confirm the microphone is powered on and linked to the 955 Access. The
mic 1 status light will be green on the 955 Access indicating the microphone
is linked.
• Confirm that the microphone is turned on. There will be a solid blue light on
the top of microphone to indicate it is powered on and ready.
If you review these instructions and still have questions, call Lightspeed
Technical Services at 800.732.8999, 5 a.m. – 5 p.m., PST. Customers outside
the U.S. should contact their local reseller.
27
5. Warranty, Safety
& Specifications
• Confirm that microphone is not muted. A solid red light on the top of
microphone will indicate it is muted.
• Check speaker connections on the 955 Access. Make sure the cables are
properly connected (see page 9 of this manual or the Installation Guide for
more information).
• Check volume level of 955 Access. Make sure that the microphone volume
level on 955 Access is not turned down all the way. Slowly turn up the volume
level while talking into the microphone.
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
TROUBLESHOOTING CONT’D
TIPS TO OBTAIN OPTIMUM AUDIO
PERFORMANCE
• Speak in a natural voice. A normal conversational speech level will provide an
adequate signal. It is not necessary to increase the intensity of your voice—
the audio system provides adequate amplification (approximately 5 – 10 dB)
above ambient room noises.
• Avoid wearing jewelry that may rub or bump against the microphone.
• Mute the Flexmike during private conversations with a student, parent, or
other classroom visitor. You can tell the mic is muted when the light turns red.
• Recharge microphones each night. When recharged nightly, operating time
(actual usage) for the microphones will last through a typical school day.
28
Lightspeed Classroom Audio Access Systems are guaranteed against
malfunction due to defects in materials and workmanship for a period of FIVE
(5) YEARS, beginning at the date of the purchase invoice. If such malfunction
occurs, the product will be repaired or replaced (at Lightspeed’s option)
without charge during the warranty period.
Lightspeed’s Warranty Exchange Program applies to all classroom audio systems
within the five (5) year warranty period. If a classroom audio product or
component has an issue that requires service, a refurbished replacement
will immediately be sent to the customer to minimize downtime. Customers
will receive the exchange product(s) or component(s) within 2-3 days. A
prepaid return label will be included with exchanged products so original
malfunctioned equipment can be returned to Lightspeed. Any exchanged
equipment will remain covered under the original five (5) year warranty.
1. Warranty on Access microphones is FIVE (5) YEARS.
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
FIVE-YEAR LIMITED WARRANTY
3. Optional Accessories
WARRANTY, SAFETY &
SPECIFICATIONS
2. Set Up & Use /
Daily Operation
SECTION 5:
3. A prepaid shipping label will be provided by Lightspeed for warranty repairs
within the United States. Customers outside the U.S. should refer to the
Lightspeed website (www.lightspeed-tek.com) for warranty repair instructions.
4. Warranty does not extend to finish, appearance items, or malfunctions due
to abuse or operation other than specified conditions, nor does it extend to
incidental or consequential damages. Repair by other than Lightspeed or its
authorized service agencies will void this warranty. Information on authorized
service agencies is available from Lightspeed Technologies, Inc.
1. Overview
2. Warranty on Lightspeed NiMH rechargeable batteries is one (1) year.
Our Service Department (800.732.8999, 5 a.m. – 5 p.m., PST) will handle all your
repair/replacement needs. Customers outside the U.S. should contact their local
reseller.
29
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
3. Optional Accessories
2. Set Up & Use /
Daily Operation
SAFETY WARNINGS AND CERTIFICATIONS
The lightning flash with arrowhead symbol
inside an equilateral triangle is intended
to alert the user to the presence of non
insulated “hazardous voltage” within the
product’s enclosure, which may be of sufficient
magnitude to induce a risk of electric shock
to persons.
The exclamation mark inside an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instruction in the
literature accompanying this product.
USE A LIGHTSPEED
SUPPLIED BATTERY ONLY
CERTIFICATIONS
ATTENTION
1. Overview
RISQUE D’ÉLECTROCUTION
NE PAS OUVRIR
CONFORMÉMENT AUX
NORMES
D’INSTALLATION
APPLICABLES,
This product
is listed
to UL standards
and requirements
electrical
by
CE PRODUIT DOIT ÊTRE
INSTALLÉforPAR
UNEsafety
PERSONNE
FAMILIARIUnderwriters Laboratories Inc.
SÉE AVEC LA CONCEPTION ET LE FONCTIONNEMENT DU PRODUIT
ET CONSCIENTE DES RISQUE ENCOURUS.
This product conforms with the essential
requirements of the following European Union
Directives: 2004/108/EC Electromagnetic
Compatibility (EMC) and 2006/95/EC Low
Voltage Directive (LVD).
Lightspeed Technologies launched a formal
product recycle program in Europe that
complies with the European Union Directive
2002/96/EC on Waste Electrical and Electronic
Equipment (“WEEE Directive”). Please visit our
website at www.Lightspeed-tek.com for more
information.
This product is manufactured using lead-free
processes and is free of other materials
harmful to the environment. It conforms to the
most stringent new European guidelines for
consumer products (RoHS).
30
5. Warranty, Safety
& Specifications
PRÉCAUTIONS DE SÉCURITÉ ET
CERTIFICATIONS
L’éclair flèche dans un triangle équilatéral avertit
l’utilisateur de la présence d’une “tension
dangereuse” non isolée a l’interieur de l’appareil,
qui peut être d’une ampleur suffisante pour
constituir un risque d’électrocution.
Le point d’exclamation contenu dans un triangle
équilatéral avertit l’utilisateur de la présence
d’importantes instructions d’exploitation et
de maintenance dans la documentation qui
accompagne ce produit.
UTILISEZ UNIQUEMENT LA BATTERIE
LIGHTSPEED FOURNIE
3. Optional Accessories
CONFORMÉMENT AUX NORMES D’INSTALLATION APPLICABLES,
CE PRODUIT DOIT ÊTRE INSTALLÉ PAR UNE PERSONNE FAMILIARISÉE AVEC LA CONCEPTION ET LE FONCTIONNEMENT DU PRODUIT
ET CONSCIENTE DES RISQUE ENCOURUS.
2. Set Up & Use /
Daily Operation
4. Maintenance &
Troubleshooting
ATTENTION
RISQUE D’ÉLECTROCUTION
NE PAS OUVRIR
Ce produit est certifié conforme aux normes et aux
exigences UL en matière de sécurité électrique par
Underwriters Laboratories Inc.
1. Overview
CERTIFICATIONS
Ce produit est conforme aux principales exigences
des directives de l’Union Européenne suivantes :
2004/108/EC Electromagnetic Compatibility (EMC)
and 2006/95/EC Low Voltage Directive (LVD).
Lightspeed Technologies a lancé un programme
de recyclage de produits en Europe conformément
à la directive de l’Union Européenne 2002/96/CE
relative aux déchets d’équipements électriques et
électroniques (directive « DEEE »). Veuillez visiter
notre page Web www.Lightspeed-tek.com pour
plus de renseignements.
Ce produit est fabriqué en utilisant des processus
sans plomb ni aucune autre matière nuisible à
l’environnement. Il est conforme aux nouvelles
règles européennes les plus strictes en matière de
biens de consommation (RoHS).
31
5. Warranty, Safety
& Specifications
FCC Notice to user
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including interference that may cause undesired operation.
4. Maintenance &
Troubleshooting
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
2. Set Up & Use /
Daily Operation
3. Optional Accessories
•Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is receiving” the interference).
•Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
•Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna
is connected.
FCC RF Radiation Exposure Statement
This device (Access Link) complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This
device should be installed and operated with a minimum distance of 20cm between the radiator (Access Link) and any
part of your body.
For body worn operation, the portable part (Flexmike) has been tested and meets FCC RF exposure guidelines.
This device must not be co-located or operating in conjunction with any other antenna or transmitter. The changes or
modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Notice to Canada User
English
1. Overview
This device complies with Industry Canada licence‐exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
French
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisee aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en
compromettre le fonctionnement
RF Radiation Exposure Statement
English
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves
(radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by
Health Canada and include a substantial safety margin designed to assure the safety of all persons, regardless of age
and health.
French
Votre appareil mobile est un émetteur-récepteur radio. Il est conçu pour ne pas dépasser les limites d’exposition aux ondes
radio (champs électromagnétiques de fréquence radio) recommandées par les directives internationales. Les lignes
directrices ont été élaborées par Santé Canada et comprennent une marge de sécurité importante destinée à assurer
la sécurité de toutes les personnes, indépendamment de l’âge et de la santé.
32
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
EU DECLARATION OF CONFORMITY
5. Warranty, Safety
& Specifications
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
4. Maintenance &
Troubleshooting
NOTE: Lightspeed is not responsible for any changes or modifications not expressly approved by the party responsible for
compliance. Such modifications could void the user’s authority to operate the equipment.
3. Optional Accessories
NOTICE FOR USB
Manufacturer:
Lightspeed Technologies, Inc.
Address:
11509 SW Herman Rd,
Tualatin, Oregon 97062
We herewith declare that the following systems comply with the appropriate basic safety and health
requirements of the Directive based on its design and type, as brought into circulation by us. In case of
alteration of the system, not agreed upon by us, this declaration will lose its validity.
2. Set Up & Use /
Daily Operation
EU Declaration of Conformity
According to EC LVD Directive 2006/42/EC
Model Numbers: LSRCA 1881, LSFM 1881, FCP 1881, FCCS, FCHRC, LSMCA 1881,
LSSM 1881, LSTCA 1881, LSAL 1881
As appropriate, products conform to the following EU standards listed:
Safety Standards:
1. Overview
Products: Redcat Access, Flexmike, Flexcat Pod, Flexcat Charging Station,
Flexcat Hand Remote Control, Media Connector Access, Sharemike, Topcat, Access Link
IEC/EN 60065 and amendments
EMC/RF Standards: EN301 406 V2.1 (2009-07)
EN 301489-1/-6
EN 301489-1/-17
EN 50371 (2002)
EN 50385 (2002)
EN 300 328
EN 55022
EN 55024
AS/NZ CISPER 22
AS/NZ 4268
The Technical Construction File is available to proper authorities and the product is CE marked.
Lightspeed Representative:
Michael Frost, Compliance Engineer
Date:
02/18/2015
P/N: 085-0013-02
33
5. Warranty, Safety
& Specifications
4. Maintenance &
Troubleshooting
3. Optional Accessories
2. Set Up & Use /
Daily Operation
SYSTEM SPECIFICATIONS
955 ACCESS
Frequency response:
120 Hz - 8 kHz
DC power Input:
24V/2.5A
Power output:
40 Watts total (20 W/channel)
Total harmonic distortion
<1% @ 10W
Wireless communication:
Access Technology (1.9 GHz + RF4CE)
Tone control:
1 bass/treble control
Audio inputs:
Audio output:
Four (4) 3.5mm stereo w/ volume
control
3.5mm stereo w/ volume control
PageFirst input:
Euroblock
Audio Link indicators:
2 indicators for Flexmike 1 and 2
Device Registration:
Dimensions (W x H x D):
Push button for pod(s), Flexmike(s),
Sharemike, Media Connector, and
remote(s)
7.6” x 5” x 1.13” (193 x 127 x 29mm)
Weight:
9.6 oz. (272g)
1. Overview
FLEXMIKE (1-2):
Description:
pendant-style microphone
Earbud lanyard:
magnetic clasp with integrated earbud
Wireless communication:
Access Technology (1.9 GHz)
Audio distortion:
<1%
Integrated microphone:
uni-directional electret
Earbud output:
3.5mm
Audio input:
3.5mm
Volume control:
+/- 6 dB
Battery power:
2.5V NiMH battery pack
Battery life:
8 hours (fully charged)
Charging:
2 contacts for cradle charging
USB connection:
type Micro-B for charging and audio
Power:
on/off switch
Registration:
push button for registration with
Access Link
2.9” x 1.1” x 1.0” (74 x 28 x 25mm)
1.8 oz (51g)
Dimensions (L x W x H):
Weight:
34
<1%
Integrated microphone:
uni-directional dynamic
Audio input:
3.5mm
Battery power:
2 AA NiMH battery pack
Battery life:
8 hours (fully charged)
Charging:
5V charging jack
Power:
on/off button
Registration:
push button for registration with
Access Link
2.25” x 2.25” x 8.75” (57.2 x 57.2 x
222.3mm)
7.36 oz (209g)
Dimensions (L x W x H):
Weight:
MEDIA CONNECTOR
USB Power:
5V micro-B USB connector
Wireless communication:
Access Technology (1.9 GHz + RF4CE)
Tone control:
1 bass/treble control
Audio input:
3.5mm stereo (x4) w/ master volume
Audio output:
Audio Link indicator:
3.5mm stereo (X2) mixed w/ volume
control
1 LED on front panel
Registration indicator
1 LED on back panel
Device Registration:
Push button for Access Link
Dimensions (W x H x D):
7.6” x 5” x 1.13” (193 x 127 x 29mm)
Weight:
9.6 oz. (272g)
5. Warranty, Safety
& Specifications
Audio distortion:
4. Maintenance &
Troubleshooting
Access Technology (1.9 GHz)
3. Optional Accessories
Handheld microphone
Wireless communication:
2. Set Up & Use /
Daily Operation
Description:
1. Overview
SHAREMIKE
35
LIGHTSPEED TEC H N O L O G I ES
1 1509 SW HERM AN R O A D / TUA L ATIN , O R 9 7 062
T OLL FREE: 800.73 2 .8 9 9 9 / PHO N E : 5 0 3 .6 8 4 .5 5 38 / FAX : 503. 684. 3197
LI GHTS PEED-TEK.CO M
MN0513US01-0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.5-c014 79.151481, 2013/03/13-12:09:15
Create Date                     : 2015:06:02 11:08:02-07:00
Metadata Date                   : 2015:06:02 11:08:09-07:00
Modify Date                     : 2015:06:02 11:08:09-07:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Instance ID                     : uuid:20dfc199-2b13-7742-bbc3-825b751a18bd
Original Document ID            : xmp.did:7A0408CC9B216811ACAFF2A2B90B22C7
Document ID                     : xmp.id:7b808e93-39fe-46d7-bdce-fcc99b19e48c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:2632d152-1fe8-44f1-a897-34faf7aaf284
Derived From Document ID        : xmp.did:5fd013a1-7d79-4cee-9963-01714953130d
Derived From Original Document ID: xmp.did:7A0408CC9B216811ACAFF2A2B90B22C7
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2015:06:02 11:08:02-07:00
Format                          : application/pdf
Title                           : 955_Access_Manual_MN0513US01-0.indd
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 36
Creator                         : Adobe InDesign CC (Macintosh)

EXIF Metadata provided by EXIF.tools