Lincoln Electric Power Mig 255Xt Users Manual Wire Feeder/Welders

255XT to the manual 0bbcbad7-9afc-420a-887b-7ed87b4d2bf7

: Lincoln-Electric Lincoln-Electric-Power-Mig-255Xt-Users-Manual-574368 lincoln-electric-power-mig-255xt-users-manual-574368 lincoln-electric pdf

Open the PDF directly: View PDF .
Page Count: 8

POWER MIG®. The Professional’s ChoiceSM

.

The POWER MIG®255XT sets the standard for MIG and flux-cored welding

in light industrial job shop fabrication, maintenance or repair work. Diamond

Core Technology™delivers a wide voltage sweet spot across the welding

range, low spatter levels and a forgiving arc on steel, stainless and

aluminum – even for demanding out-of-position work.

It’s Spool Gun Ready, so it’s fast and easy to tackle difficult aluminum

applications. Exclusive 115 volt auxiliary power means you can power lights,

grinders, and chargers right where you work! And, the MAXTRAC®drive

system with a patented Split Wire Guide system and tachometer feedback

ensures trouble-free wire delivery. Add the extra length 15 foot gun cable

and innovative convenience features and you begin to understand why the

POWER MIG®255XT is considered The Professional’s ChoiceSM.

WIRE FEEDER/WELDERS

CV

DC

1

PHASE

60

Hz

Publication E7.54 7/08

www.lincolnelectric.com

Advantage Lincoln

Arc Performance:

•Diamond Core Technology™, a patented choke design, delivers:

- A forgiving arc, even with large stickout changes

- Excellent out-of-position arc action

- A wide voltage sweet spot at a given wire feed speed

- Low spatter

Superb Quality:

•MAXTRAC®cast aluminum industrial wire drive features dual

driven rolls, easy-turn numeric tension indicator, brass-to-brass

gun connections and Lincoln’s 100% wire-supporting split wire

guide system.

•Three-year warranty on parts and labor (90 days warranty on gun).

Professional Features:

•Digital meters display, preset voltage and wire feed speed, and

actual voltage and preset wire feed speed while welding.

•Generous 15 ft. (4.5 m) gun and cable assembly makes it easy to

reach your work.

•Spool Gun Ready – The POWER MIG®255XT has the electronics and

second gas solenoid built-in to drive either the Magnum®250LX

spool gun or the Magnum®SG spool gun.

•The most economic spool gun solution in the 250A category –

costing hundreds less.

•115V auxiliary receptacle (208/230V model only) to power a grinder

or other auxiliary equipment in your work area.

•Free Timer Functions adds 4-step trigger interlock, spot mode,

adjustable run-in speed for smoother arc starting, and adjustable

burnback time to minimize wire sticking in puddle.

POWER MIG®255XT Output

Input

(1) Input current is at the rated output with the 115V auxiliary receptacle also drawing 15 amps.

TECHNICAL SPECIFICATIONS

Product

Name Product

Number Input Power Rated Output

Current/Voltage/Duty Cycle Input Current @

Rated Output(1) Output Range

Dimensions

HxWxD

inches (mm) Net Weight

lbs. (kg)

POWER MIG®255XT

One-Pak®

Spool Gun Pkg.

K2702-1 208/230/1/60 250A/26V/40% 56/52A(1)

30-300 Amps

50-700 ipm WFS

(1.3-17.7 m/min)

Max. OCV: 40V 31.8 x 18.9 x 38.8

(808 x 408 x 985)

220

(100)

POWER MIG®255XT

Base Unit

K2701-1 208/230/1/60 250A/26V/40% 56/52A(1) 30-300 Amps

50-700 ipm WFS

(1.3-17.7 m/min)

Max. OCV: 40V

K2701-2 230/460/575/1/60 50/24/19A

Processes

MIG, Flux-Cored

Spool Gun Capable

Medium Duty Heavy Duty

PERFORMANCE

POWER MIG®255XT

www.lincolnelectric.com

[2]

A CLOSER LOOK

FEATURES

PROCESS CAPABILITIES

Electrode Electrode Shielding Minimum Maximum

Process Wire Polarity Gas Thickness Thickness(1)

MIG .025", .030", .035", .045"

Mild Steel (0.6, 0.8, 0.9, 1.1 mm) DC+ 100% CO2or 24 ga. (.024") 1/2" (.500")

SuperArc®L50, L-56 Ar/CO2Blend (0.6 mm) (19.1 mm)

SuperGlide®S-3, S-6

MIG .030", .035", .045" Ar/CO2Blend 20 ga. (.036") 1/2" (.500")

Stainless (0.8, 0.9, 1.1 mm) DC+ or Tri-Mix (0.9 mm) (19.1 mm)

Blue Max®308LSi, 309LSi, 316LSi

MIG 3/64" 1/16" (.063") 1/2" (.500")

Aluminum (1.2 mm) DC+ 100% Argon (1.6 mm) (19.1 mm)

SuperGlaze®4043 and 5356

Flux-Cored, .035", .045" 100% CO2or 12 ga. (.109") 1/2" (.500")

Gas-Shielded (0.9, 1.1 mm) DC+ Ar/CO2Blend (2.7 mm) (19.1 mm)

Mild Steel Outershield®71M and MC-710

Flux-Cored, .035", .045" 18 ga. (.050") 3/4" (.750")

Self-Shielded (0.9, 1.1 mm) DC- — (1.2 mm) (12.7 mm)

Mild Steel Innershield®NR®-211-MP(2) and NR®-212

(1) Lincoln Electric recommends multiple pass welds on 1/2" (12.7 mm) material. Consult the appropriate application procedures and guidelines for selecting the correct wire size,

gas type and number of passes.

(2) .035" and .045" (0.9 and 1.1 mm) NR®-211-MP is only recommended up to 5/16" (7.9 mm) thick material.

Grinders

Battery Chargers

for Cordless Tools

Work Lights

Welding Fume

Extraction

Rotary Tools

Saws

Energize Your Shop!

— The POWER MIG®

255XT features a 115 volt auxiliary power

receptacle which allows you to power

grinders, lights, cordless tool chargers

or any other power tools.(1)

What Is It?

Diamond Core Technology™is a patented innovative

choke design that filters the welding arc. It provides

dynamic optimized arc filtering across the entire

welding range of amperages. Other arc stabilization

methods are “fixed” – or only working at certain

amperages – resulting in harsh arc characteristic

changes over the welding range.

Results:

• Great starts and low spatter.

• Outstanding performance on

a wide variety of materials –

steel, stainless and aluminum.

• A wide sweet spot for optimal

arc performance.

Great For:

• Steel, stainless and aluminum.

• Out-of-position work.

• Long arc applications.

• Weaving techniques.

(1)115V auxiliary power is only available on 208/230V models.

POWER MIG®255XT

www.lincolnelectric.com

[3]

A CLOSER LOOK

FEATURES CONʼT.

Easy Load Gas Cylinder Platform ALockable storage compartment with tool

tray stows your welding consumables and

valuable personal tools.

BBuilt-in gun holder conveniently stores

welding gun.

CHandy MIG Gun Expendables Chart.

Easy Load Wire Compartment

Split guides support the wire

through the entire drive

system to minimize

feeding problems.

Wide idler arm hinge provides improved

drive roll clamping pressure.

Removable outer wire guide for

easy access.

Input bushing protects the wire from damage.

Reliable brass-to-brass gun receiver

bushings provide connectivity to

Magnum

®

or competitive guns. Easier

interchangeability, better mechanical

support and electrical current transfer.

Easy turn numeric tension indicator with

optimized ranges for different wire types.

Internal tachometer feedback drive

system allows you to maintain

constant wire feed speed

for consistent welds.

Separate drive gear reduces pressure

on motor shaft for long life.

Two gear driven rolls. No tools needed

to swap rolls on or off.

Professional Heavy Duty Wire Drive System

Extra–Length 15 ft. (4.5 m) Gun Additional Gas Solenoid – Controls Gas

Flow to a Spool Gun

Compare These Innovations – Make the Professional’s ChoiceSM!

Timer Functions

Adds 4-step trigger interlock, spot mode,

adjustable run-in speed for smoother arc

starting, and adjustable burnback time to

minimize wire sticking in puddle.

B

C

A

POWER MIG®255XT

www.lincolnelectric.com

[4]

A CLOSER LOOK

SPOOL GUN READY!

The POWER MIG®255XT has built-in electronics to drive either a

Magnum®SG Spool Gun or a Magnum®250LX Spool Gun. In

addition, a second gas solenoid is provided to supply and control

gas flow to the spool gun.

Easy as 1-2-3!

Simply plug the spool gun control cable into the built-in 7-pin

connector (Magnum®SG gun requires K2445-1, 6- to 7-pin

control cable adapter plug.)

Connect the spool gun’s power cable to the output terminal

in the wire drive compartment.

Hook the spool gun gas line to the solenoid gas fitting and

you’re ready to weld!

QUALITY AND RELIABILITY

• Fan-As-Needed™(F.A.N.™) provides cooling of transformer and other components when welding,

reducing power consumption, noise and extending welder life.

• Thermostatic protection from current overload and excessive temperatures.

• Printed circuit boards are environmentally-shielded using Lincoln's engineered potting and protective

frame trays.

• Low input current draw for energy-efficient low cost operation.

• Power source line voltage regulation holds voltage setting constant to maintain weld quality even when

the input voltage fluctuates ±10%.

• Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 Environmental Standards.

• Approved by Canadian Standards Association (CSA).

• Three-year warranty on parts and labor (90 days warranty on gun).

Key Controls

A. Digital meter displays preset wire feed speed.

B. Presettable digital wire speed control with fine

resolution at low settings.

C. Digital meter displays preset voltage setting and

actual voltage while welding.

D. Built-in gun holder.

E. Presettable digital voltage control with fine resolution

at low settings.

F. Angled gun connection for improved feedability.

G. Second gas solenoid for spool gun use.

B

A

D

C

F

E

1

G

2

3

1

2

3

POWER MIG®255XT

www.lincolnelectric.com

[5]

A CLOSER LOOK

POWER MIG®255XT SPOOL GUN SOLUTIONS

The economic Magnum®SG or premium Magnum®250LX spool guns

are recommended for easy changeovers to a second electrode mate-

rial such as stainless steel or aluminum.

Avoid the time-consuming liner, contact tip, drive roll and machine

polarity changes necessary when preparing your machine’s wire drive

for use with those materials. Spool guns are especially recommended

for feeding soft aluminum wire.

Lincoln’s spool guns accommodate 4" (100 mm) diameter 1 lb.

(.45 kg) spools and feature convenient wire feed speed control at

the gun handle.

MAGNUM®SG SPOOL GUN

• 250A, 60% duty cycle.

• .025"-3/64" (0.6-1.2 mm) electrode diameter capability.

• Wire feed speeds from 50-650 ipm (1.2-16.5 m/min.).

• 25 ft. (7.6 m) gun cable length – compare to the competition.

• Adjustable speed control at the handle – allows you to tailor the

WFS setting at the gun.

• See E12.22 for Expendable Parts.

• Order K487-25 spool gun and K2445-1 control cable adapter.

MAGNUM®250LX SPOOL GUN - FACTORY READY

• 300A, 60% duty cycle.

• .025” - 3/64" (0.6-1.2 mm) electrode diameter capability.

• Wire feed speeds up to 800 ipm (20.3 m/min.).

• 25 ft. (7.6 m) gun cable length with 7-pin MS-Type Connector.

• WFS control for fine adjustment of wire feed speed at the gun.

• Zippered cable jacket is standard.

• See E12.25 for Expendable Parts.

• Order K2490-1.

Improved Spool Gun Operation!

It’s easy to start welding with a spool gun. Set wire feed speed

at the gun – see the pre-set wire feed speed displayed on the

POWER MIG®255XT meter.

Faster set-up – No more guessing on wire feed speed!

Adjust speed on the gun and watch the wire feed speed

change on the POWER MIG

®

255XT.

OONNEE--PPAAKK

®®

((KK22770022--11)) IINNCCLLUUDDEESS::

• POWER MIG®255XT (K2701-1)

• Magnum®250LX Spool Gun (K2490-1)

• Spool Gun Holder (K1738-1)

• Dual Cylinder Mounting Kit (K1702-1)

• Extra Regulator (K586-1)

Industry

Description Order No. Reference No.

Magnum®250L Gun and Cable Assembly

Fixed Gas Nozzle Model

For .035"-045" (0.9-1.2 mm) wire sizes

12 ft. (3.6 m) cable K533-7

Adjustable Gas Nozzle Model

For .035"-.045" (0.9-1.2 mm) wire sizes

10 ft. (3.0 m) cable K533-1

15 ft. (4.5 m) cable K533-3

Cable Liners

For All Gun Cable Lengths

.025"-.030" (0.6-0.8 mm) KP1934-2 42-23-15

.030"-.035" (0.8-0.9 mm) KP1934-3 42-3035-15

.035"-.045" (0.9-1.2 mm) KP1934-1(1) 42-4045-15

3/64" (1.2 mm) Aluminum KP1955-1(2) 42N-3545-15

Contact Tips

Standard Duty

.025" (0.6 mm) KP2020-6 14-23

.030" (0.8 mm) KP2020-7 14-30

.035" (0.9 mm) KP2020-1(1) 14-35

.040" (1.0 mm) KP2020-8 14-40

.045" (1.2 mm) KP2020-2(2) 14-45

Heavy Duty

.035" (0.9 mm) KP2021-1 14H-35

.040" (1.0 mm) KP2021-6 14H-40

.045" (1.2 mm) KP2021-2 14H-45

Tapered

.025" (0.6 mm) KP2022-5 14T-23

.030" (0.8 mm) KP2022-6 14T-30

.035" (0.9 mm) KP2022-1 14T-35

.040" (1.0 mm) KP2022-7 14T-40

.045" (1.2 mm) KP2022-2 14T-45

Aluminum

3/64" (1.2 mm) KP2010-5(2)

Fixed Gas Nozzles/Diffuser Assembly

Fixed (flush)

3/8" (9.5 mm) KP1931-1 23-37-F

1/2" (12.7 mm) KP1931-2(1) 23-50-F

5/8" (15.9 mm) KP1931-3 23-63-F

Fixed (recessed)

3/8" (9.5 mm) KP1930-1 23-37

1/2" (12.7 mm) KP1930-2 23-50

5/8" (15.9 mm) KP1930-3 23-62

Requires: Gas Diffuser Assembly

.025-.045" (0.6-1.2 mm) KP2026-3(1) 52FN

POWER MIG®255XT

www.lincolnelectric.com

[ 6]

A CLOSER LOOK

THE MAGNUM®250L GUN

• Magnum®250L gun and cable assembly, shipped with the

POWER MIG®255XT, is equipped to feed .035"-.045" (0.9-1.2

mm) solid steel wire.

• Lightweight and flexible for easy maneuverability.

• Fiberglass handle with non-slip grooves to maximize comfort

and control.

• Heavy duty gun trigger switch for positive electrical contact

and long life.

• Magnum®replacement parts are fully compatible with other

leading brands. Industry reference numbers are provided for

ease of interchangeability.

(1) Included with POWER MIG®255XT.

(2) Included in the K1703-1 Aluminum Feeding Kit.

MAGNUM

®

REPLACEMENT PARTS MAGNUM

®

REPLACEMENT PARTS

Industry

Description Order No. Reference No.

Adjustable Gas Nozzle/Diffuser Assembly

Adjustable Slip-On

3/8" (9.5 mm) KP1935-3 22-37

1/2" (12.7 mm) KP1935-2 22-50

5/8" (15.9 mm) KP1935-1 22-62

Requires:

Nozzle Insulator Assembly KP2025-1 32

Gas Diffuser Assembly:

.023"-030" (0.6-0.8 mm) KP2026-2 52-23

.035"-.045" (0.9-1.2 mm) KP2026-1 52

Gasless Nozzle/Diffuser Assembly

(Innershield Nozzle) KP1947-1

Requires:

Gas Diffuser Assembly KP2026-1 52

Gun Tube Assembly

Standard (60°) KP2015-1(1)

45° KP2041-1(2)

Wire Size Order Number

.023"-.030" (0.6–0.8 mm) KP1696-030S

Solid .035" (0.9 mm) KP1696-035S(1)

.035"/.045" combination KP1696-1

.040" (1.0 mm) KP1696-2

.045" (1.2 mm) KP1696-045S

Cored .035" (0.9 mm) KP1697-035C

.045" (1.2 mm) KP1697-045C

Aluminum 3/64" (1.2 mm) KP1695-3/64A(2)

(1) Included with POWER MIG®255XT. (2) Included in the K1703-1 Aluminum Feeding Kit.

DRIVE ROLL KITS

POWER MIG®255XT

www.lincolnelectric.com

[ 7]

RECOMMENDED OPTIONS

Magnum®SG Spool Gun Control

Cable Adapter

Allows the K487-25 Magnum®SG

Spool Gun’s 6-pin control cable

plug to connect to the POWER

MIG®255XT’s 7-pin spool gun

control cable receptacle.

Order K2445-1

Magnum®250LX Spool Gun

Control Cable Extension

Extend your spool gun reach with

a 25 ft. (7.6 m) Control Cable

Extension. Features a 7-pin female

MS-type connector on the spool

gun end and a 7-pin male MS-type

connector on the power source end.

Order K2519-1

Spool Gun Holder

Provides neat storage of spool

gun.

Order K1738-1

Magnum®Guns

Alternate guns can be used with

the POWER MIG®, including

Magnum®200, 300 and 400 MIG

(GMAW) models, as well as

Magnum®250XA Fume Extraction

Gun.

See Publications E12.10 and

E13.10 for details.

Note: Requires K466-6 Adapter Kit.

Magnum®Connection Kit

Permits use of Magnum®200, 300

and 400 gun and cable assemblies

on POWER MIG®.

Order K466-6

8" O.D. Spool Adapter

Permits 8" (200mm) O.D. spools

to be mounted on 2" (51 mm)

O.D. spindles.

Order K468

Welding Fume Extractors

Lincoln offers a wide variety

of welding fume extraction

environmental system solutions,

ranging from portable systems

easily wheeled around the shop

to shop-wide central systems

servicing many dedicated welding

stations.

Request Publication E13.40

GENERAL OPTIONS

Magnum®SG Spool Gun

250 Amp, 60% Duty Cycle with

25 ft. of cable length. Feeds

.025” - 3/64” inch diameter wire.

Single Turn remote wire feed

speed control at the gun.

Adjustable wire spool brake and

adjustable drive roll tension.

Order K487-25

Requires K2445-1 Adapter

Magnum®250LX Spool Gun

300 Amp, 60% Duty Cycle with

25 ft. of cable length. Feeds

.025” - 3/64” inch diameter wire.

Multi-Turn remote wire feed

speed control at the gun. Deluxe

wire spool break requires no

adjustments. Adjustable drive roll

tension and easy open wire drive

rolls for easy wire loading.

Ergonomic Sure Grip handle.

Contact tip storage built in spool

gun cover.

K2490-1

Factory Ready

Dual Cylinder Mounting Kit

Permits side-by-side mounting

of two full size gas cylinders,

with easy loading. Attaches

easily to POWER MIG®

undercarriage.

Order K1702-1

Canvas Cover

Protect your POWER MIG®when

not in use. Made from attractive

red canvas that is flame retardant,

mildew resistant and water

repellent. Fits any POWER MIG®

machine with or without a gas

cylinder in the cylinder rack.

Will not fit if spool gun holder is

attached to the machine.

Order K2378-1

Aluminum Feeding Kit

Conversion kit for welding with

3/64" (1.2 mm) aluminum wire.

Includes drive rolls, contact tips

(2), non-metallic wire guides and

cable liner.

Order K1703-1

CUSTOMER ASSISTANCE POLICY

The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the

needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric®for advice or information about their use of our products. We respond

to our customers based on the best information in our possession at that time. Lincoln Electric®is not in a position to warrant or guarantee such advice, and assumes no liability,

with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to

such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has

been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.

Lincoln Electric®is a responsible manufacturer, but the selection and use of specific products sold by Lincoln Electric®is solely within the control of, and remains the sole responsibility

of the customer. Many variables beyond the control of Lincoln Electric®affect the results obtained in applying these types of fabrication methods and service requirements.

Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

THE LINCOLN ELECTRIC COMPANY

22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com

POWER MIG®255XT ORDER FORM

PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE

POWER MIG®255XT 208/230 K2701-1

POWER MIG®255XT 230/460/575 K2701-2

POWER MIG®255XT ONE-PAK®SPOOL GUN PKG. K2702-1

RECOMMENDED GENERAL OPTIONS

Magnum®SG Spool Gun K487-25

Magnum®250LX Spool Gun K2490-1

Dual Cylinder Mounting Kit K1702-1

Canvas Cover K2378-1

Aluminum Feeding Kit K1703-1

POWER MIG®255XT/Magnum®SG Spool Gun Control Cable Adapter K2445-1

Magnum®250LX Spool Gun Control Cable Extension K2519-1

Spool Gun Holder K1738-1

Magnum®Guns See publications E12.10, E13.10

Magnum®Connection Kit K466-6

8" O.D. Spool Adapter K468

Welding Fume Extractors See publication E13.40

TOTAL: