Lincoln Electric Power Wave 355M Users Manual SVM181
405M to the manual 7f08111d-9dd6-4383-ba09-6ce994ed41b6
2015-02-09
: Lincoln-Electric Lincoln-Electric-Power-Wave-355M-Users-Manual-574379 lincoln-electric-power-wave-355m-users-manual-574379 lincoln-electric pdf
Open the PDF directly: View PDF
Page Count: 137 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Master Table of Contents
- Safety
- Section A - Installation
- Section B - Operation
- Section C - Accessories
- Section D - Maintenance
- Section E - Theory of Operation
- Section F - Theory of Operation
- Symptoms
- Major physical or electrical damage is evident when the sheet metal cover is removed.
- The machine is dead—no output—no LED’s.
- The main input fuses (or breaker) repeatedly fail.
- The machine does not have welding output.
- The POWER WAVE 355M/405M will not produce full output.
- The machine regularly overheats and the yellow thermal light is ON indicating a thermal overload.
- An attached wire feeder will not function correctly. Apparently the wire feeder is not being powered up.
- The machine often “noodle welds” with a particular procedure. The output is limited to approximately 100 amps.
- Excessively long and erratic arc.
- Auxiliary receptacle is “dead” no auxiliary voltage.
- A fault or error code is displayed.
- General degradation of the weld performance.
- Section G - Diagrams