Lincoln Electric Ranger 305G Users Manual Engine Driven Welders
305G to the manual e30c883a-f8f9-45ed-b286-b73308f35426
2015-02-09
: Lincoln-Electric Lincoln-Electric-Ranger-305G-Users-Manual-574452 lincoln-electric-ranger-305g-users-manual-574452 lincoln-electric pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
ENGINE DRIVEN WELDERS Ranger 305G ® 300 Amp DC Gasoline Engine Driven Welder Output CC CV The Ranger® 305G is a powerful stick, TIG, wire and pipe welding engine driven welder that is ready for all day, everyday performance. Rugged and dependable, the Ranger® 305G is built with a totally enclosed case for maximum protection; Lincoln’s Chopper Technology™ for an arc operators appreciate; and a 12 gallon fuel tank that will last you through the entire day. Lincoln’s Ranger® 305G ... it’s ready for a workout. DC 10.5P kW Input G L IN L CO N ELEC TR I C Processes Stick, TIG, MIG, Flux-Cored, Gouging Advantage Lincoln • Gasoline Engine-Driven Welder - A powerful 300 amp DC CC/CV gasoline engine-driven welder. All rated outputs at 100% duty cycle 104°F (40°C). - Only compact gasoline welder in N. America rated at 29V for 300 amps of stick welding. • 10,500 Watts Peak Single-Phase AC Generator Power - 10,500 watts peak for motor starting. 500 watts more! - 9,500 watts contiuous for high capacity needs such as a back-up generator, powering a Pro-Cut® plasma cutter or an Invertec® inverter welder. Also for lights, a grinder or other power tools. • 23 HP Kohler® Gasoline Engine - Increase from 22 HP to 23 HP for plenty of engine horsepower. - 2-cylinder, 4-cycle OHV (overhead valve) air-cooled. • Skewed Rotor Design - Skewed rotor design provides AC power suitable for operating Lincoln Pro-Cut® plasma cutters and inverter power sources. Lincoln was first in the welding industry with this feature. • Multi-Process Welding - Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and blended gas) and arc gouging. • Choice of Mechanical or Electric Fuel Pump - Mechanical for most environments. - Electric for high altitude operation. • One-Pak® Package - Convenient way to order a welding system. See inside. • Digital Weld Meters - Digital weld meters for amps and volts makes it easy to precisely pre-set your procedures and monitor actual welding output. • Superior Arc Performance - Lincoln’s Chopper Technology provides easy starts, a smooth arc, low spatter and excellent bead appearance. • Three-Year Warranty - Three-year Lincoln warranty (parts and labor) on welder. (Engine is warranted separately by the engine manufacturer). TECHNICAL SPECIFICATIONS Product Name Rated Output Current/Voltage/Duty Cycle Output Range Engine Model Ranger 305G 305A DC CC/29V/100% 300A DC CV/29V/100% 20-305A DC 40-300A Pipe 20-250A DC TIG 14-29V CV 10,500 watts peak 9,500 watts continuous Kohler OHV Command CH23S Gasoline Choice of Mechanical or Electric Fuel Pump No. of Cyl. HP & Speed (rpm) Dimensions HxWxD inches (mm) Net Weight lbs. (kg) 2 23 @ 3600 36.2 x 21.5 x 42.3 (920 x 546 x 1073) 510 (231) Publication E6.117 1/07 www.lincolnelectric.com A CLOSER LOOK PERFORMANCE AC Generator Performance Welding Performance • 10,500 watts peak AC generator power. Use for motor starting. • Provides superior DC arc welding performance for stick, TIG, cored-wire, MIG and arc gouging. • 9,500 watts continuous AC generator power. For high capacity needs such as a back-up generator, powering a Pro-Cut® plasma cutter or an Invertec® inverter welder. Also for lights, a grinder or other power tools. • Lincoln Chopper Technology. - Easy Starts. - Smooth Arc. - Low Spatter. - Excellent Bead Appearance. • Up to 40 amps at 240V from the 120V/240V receptacle with weather resistant cover. Circuit breaker protection. • CC-Stick mode is optimized for general purpose stick using E7018 low hydrogen electrode. • Two 120V 20 Amp duplex receptacles with weather resistant covers. Circuit breaker protection. Will operate up to 9” grinder. • Downhill Pipe welding mode is excellent for cellulosic electrodes, such as Fleetweld® 5P+. Fast travel speeds, especially on fill passes. Arc control adjustment for a softer, buttery arc, or a more forceful, digging arc. • Maximum generator power (while not welding) is available at any weld dial setting. • Skewed rotor design provides AC power suitable for operating Lincoln plasma cutters and inverters. • Arc force control provides a soft or more forceful digging arc in CC-stick or downhill pipe mode and inductance/pinch control in CV wire mode. SIMULTANEOUS WELDING AND POWER LOADS • Built-in “hot” start for easier starts and restrikes minimizing the electrode “sticking” to the work. • Touch-Start DC TIG™ - lift tungsten to start the arc. No high frequency required. Avoids tungsten contamination in the weld. Voltage sensing output stops the arc when the torch is lifted at the end of the weld - increased operator appeal. • Arc gouging with up to 3/16” (4.8 mm) carbons. FEATURES Welding Output (Amps) Continuous Power (Watts) 300 250 200 150 100 0 None 2,300 4,200 5,600 7,100 9,500 • Fully enclosed case for equipment protection and low noise. Lower noise than partially-enclosed welders of comparable size. You can hear the difference! Noise at rated load: – 101.3 dB sound power (Lwa) – 76.7 dBA sound level at 23 ft. (7m) • Simple Controls - Keep training time to a minimum with the straightforward control panel of the Ranger 305G. The flip-down control panel door keeps less frequently used controls out of the way. • Choose mechanical or electric fuel pump. – Mechanical for most environments. – Electric fuel pump avoids vapor lock. Assures consistent fuel delivery in locations having a combination of high altitude, warm ambient temperatures, and high anti-pollution additives in gasoline. • Single, full-range output control dial. No confusion with taps and controls! • 4 welding modes: CC-Stick, Downhill Pipe, CV-Wire, and Touch-Start TIG™. • Dual digital output meters for presetting weld amps for stick, TIG or downhill pipe modes, or voltage for CV wire mode. Also displays actual outputs while welding. Memory feature holds output readings for 7 seconds after welding stops for viewing by the operator. • Electric fuel gauge located on control panel makes it easy to check the fuel level during operation. Helps you eliminate running low on fuel during critical jobs. • Output at welding terminals controlled by electronic contactor. Can be switched to "On," or to "Remotely Controlled." • Remote output control is auto-activated when plugged into a 6-pin connector. • Compatible with many Lincoln wire feeders including the LN-15, LN-25, LN-35, LN-23P, LF-72, LF-74, LN-7, LN-7 GMA, LN-742, LN-8, Cobramatic™ wire feeders and Magnum SG Gun. • Large top fuel filler neck is easily accessed for refueling. • Wire feed voltmeter switch matches polarity of wire feeder volt meter to polarity of electrode. • Electric start. Engine battery charging system light to indicate abnormal charging. • Top-of-the-line Kohler OHV 23 HP Command® engine. • Oil drain valve (no tools required) with removable extension tube. • 12 gallon fuel capacity allows you to run an extended day. 20% longer than competitive machines. • Convenient truck or trailer mounting with front and rear holes in base. [2] Ranger® 305G www.lincolnelectric.com A CLOSER LOOK Key Controls 19 18 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12 13. 14. 15. 16. 17. 18. 19. 17 16 15 1 2 14 3 13 12 4 5 11 6 10 7 9 8 Hour Meter Output Control Dial Digital Weld Output Ammeter Weld Mode Switch Arc Force & Inductance/ Pinch Control Dial Circuit Breakers 120 Volt AC Receptacles (NEMA 5-20R) Output Stud Covers Ground Stud 120/240 Volt AC Full KVA Receptacle (NEMA 14-50R) 6-Pin Remote Control & 14-Pin Feeder Connectors Wire Feeder Voltmeter Polarity Switch Welding Terminals Control Switch Digital Weld Output Voltmeter Idler Control Switch Push-Button Start Switch Engine Choke Control Run/Stop Switch Electric Fuel Gauge QUALITY AND RELIABILITY • Engine hour meter for scheduled maintenance. • Printed circuit boards are environmentally-shielded using Lincoln's engineered potting and protective frame trays. • Automatic engine shutdown protection for low oil pressure. • Oil dip stick, filters, spark plugs, etc. are easily accessed with left, right and top engine doors. Left and right doors are removable for service. • Reliable start-up with Group 58 battery with 435 cold cranking amps. • Optional K1690-1 GFCI (Ground Fault Circuit Interrupter) Kit available for additional protection from electrical shock. • Adjust exhaust direction with top-mounted 360º rotatable exhaust muffler. Muffler made from aluminized steel for longer life. • Dependability and long life aided by all-copper windings in rotor and stator with high quality insulation. • Attractive red and black powder paint finish offers increased durability with added protection from rust and corrosion. Also ultraviolet resistant to better retain color and gloss. • Approved by Canadian Standards Association (CSA). • Longer engine life, reduced noise emissions and greater fuel economy with automatic engine idler. • Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards. • Conveniently located engine maintenance label under top engine door. • Three year Lincoln warranty (parts and labor) on welder. (Engine is warranted separately by the manufacturer.) Make the Ranger 305G your portable welding station - General stick and downhill pipe, Touch-Start™ TIG, MIG, Flux-cored and AC generator to power lights, grinders or other power tools. [3] Ranger® 305G www.lincolnelectric.com A CLOSER LOOK MACHINE SPECIFICATIONS Product Name Ordering Information Ranger 305G (Kohler) K1726-4 With Mechanical Fuel Pump Description CC/Pipe-Rated Output Current/Voltage/Duty Cycle CV-Rated Output Current/Voltage/Duty Cycle 300 Amp DC Multi-Process Arc Welder with Lincoln Chopper Technology DC Constant Current 305A/ 29V/ 100% 20-305A DC Constant Voltage (1) 300A / 29V / 100% 10,500 Watts Peak DC Pipe Current 300A/ 29V/ 100% 40-300A 14-29 V Single-Dial Continuous Control K1726-5 With Electric Fuel Pump 9,500 Watts Continuous AC Power Touch-Start TIG™ 250A/ 30V/ 100% 20-250 A Generator AC Power (2)(3) 10,500 Watts Peak 9,500 Watts Continuous 60Hz. Single Phase 36.2 x 21.5 x 42.3 in (920 x 546 x 1073 mm) 510 lbs. (231 kg) Full KVA Receptacle 40A@ 240V 40A@ 120V ea. Branch Circuit (4) Wire Feeder Power 42V, 60Hz, 15 Amps 120V, 60Hz, 20 Amps Four 120V Receptacles 20A per Duplex 40A Total (4) All Models Single Dial Continuous Control 60V DC Max OCV @ 3700 RPM (1) (2) (3) (4) (5) Dimension & Weight H(5) x W x L DC constant voltage capability provides convenience and added safety when welding in electrically hazardous conditions. When welding, available auxiliary power will be reduced. Output voltage is within +\- 10% at all loads up to rated capacity. 120V will operate either 60 Hz or 50/60 Hz power tools, lights, etc. Circuits cannot be wired in parallel to operate the same device. Height is to top of exhaust elbow. Enclosure height is 30" (762 mm). ENGINE SPECIFICATIONS Engine Model Kohler OHV (6) Command CH23S Gasoline Description 2 Cylinder, 4 Cycle, OHV, Air-Cooled Gasoline Engine Aluminum Alloy Block with Cast Iron Liners Choice of Mechanical or Electric Fuel Pump Horsepower & Displacement 23 HP @ 3600 RPM 41 cu in (674 cc) Ignition Capacities Electric Start, 12V Group 58 Battery, 435 Cold Cranking Amps, Push Button Start Switch, Charging Indicator, FUEL: 12 Gals (45 Ltrs) OIL: 2.0 Qts (1.9 Ltrs) Operating Speeds Fuel Consumption FULL LOAD 3,500 RPM (300A) 1.5 Gals/Hr 5.8 Ltr/Hr. HIGH IDLE 3,700 RPM 0.8 Gals/Hr 3.2 Ltr/Hr LOW IDLE 2,400 RPM 0.5 Gals/Hr 1.9 Ltr/Hr (6) Kohler engine warranty is 3 years. SYSTEM SELECTION One-Pak® Welding Package Order a Lincoln One-Pak® and get everything you need to complete a welding package - all with one order number. (Package is not assembled.) Ranger® 305G K704 Accessory Kit Each UNASSEMBLED Package Contains: • • • • • • Ranger 305G (K1726-4 with mechanical fuel pump) Accessory Kit (K704) LN-25 Wire Feeder (K449) Gun and Cable (K126-2) Drive Roll Kit (KP653-3/32) .072” NR-232 25 Lb. Spool (ED030644) K126-2 Gun and Cable Order: K2353-2 K449-LN-25 Wire Feeder KP653-3/32 Drive Roll Kit [4] .072” NR-232 25 Lb. Spool Ranger® 305G www.lincolnelectric.com RECOMMENDED OPTIONS 120V 120V GENERAL OPTIONS GENERAL OPTIONS CONT. Power Plug Kit Provides four 120V plugs rated at 20 amps each, and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with common household receptacles. Order K802N Welding Gas Cylinder/ LPG Tank Holder Holds welding gas cylinder or LPG tank (for products with LPG engine). For LPG: Use first holder for LPG tank and second holder for welding gas cylinder. Both holders will attach to the K1770-1 undercarriage. Order K1745-1 Power Plug Kit Provides four 120V plugs rated at 15 amps each, and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug is compatible with common household receptacles. Order K802R Cable Carrier Kit Holds two 100 ft. (30.5 m) lengths of #2/0 or smaller cable. Includes holder tray for electrodes or miscellaneous items. For use with K1737-1 or K1770-1 undercarriage. Order K1739-1 Full-KVA Power Plug One dual voltage plug rated at 120/240V, 50 amps. NEMA 14-50P. Order T12153-9 Roll Cage Improves damage protection and includes built-in cable rack. Attaches to K1737-1 or K1770-1 undercarriage. Can mount to a K2635-1 trailer. Order K1788-1 GFCI Receptacle Kit Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle and installation instructions. Replaces the factory-installed 120V duplex receptacle. Each receptacle of the GFCI duplex is rated at 20 amps. Maximum total current from the GFCI duplex is limited to 20 amps. Two kits required for all 120V receptacles on the Ranger 305G. Order K1690-1 Small Two Wheel Welder Trailer For heavy-duty road, off-road, plant and yard use. Includes pivoting jack stand, safety chains, and 13" wheels. Stiff .120" welded rectangular steel tube frame construction is phosphate etched and powder coat painted for superior rust and corrosion resistance. Low sway suspension gives outstanding stability with manageable tongue weight. Wheel bearings are packed with high viscosity, high pressure, low washout Lubriplate® grease. Includes a Duo-Hitch™, a 2" ball/lunette eye combination hitch. Overall width 60". Order: K2635-1 Trailer K2639-1 Fender & Light Kit K2640-1 Cable Rack Spark Arrester Kit Attaches between muffler and exhaust elbow. Virtually eliminates spark emissions. Order K1898-1 Canvas Cover To protect the engine drive when not in use. Made from attractive red canvas material that is flame retardant, mildew resistant and water repellent. Order K886-2 STICK OPTIONS Accessory Kit For stick welding. Includes 35 ft. (10.7 m) #2/0 electrode cable, 30 ft. (9.1 m) #2/0 work cable, headshield, workclamp and electrode holder. 400 amp capacity. Order K704 All-Terrain Undercarriage For moving by hand at construction sites. Maneuvers over obstacles. Heavy-duty puncture-resistant tires. Order K1737-1 Factory Undercarriage For moving by hand on smooth surface floors. Heavy-duty, punctureresistant tires and front caster. Convenient steering handle. Order K1770-1 Accessory Kit For Stick welding. Includes 20 ft. (6.1 m) #6 electrode cable with lug, 15 ft. (4.6 m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode. 150 amp capacity. Order K875 [5] Ranger® 305G www.lincolnelectric.com RECOMMENDED OPTIONS STICK OPTIONS CONT. TIG OPTIONS CONT. Remote Control Kit Consists of a control box with choice of two cable lengths. Permits remote adjustment of output. Order K857 for 25 ft. (7.6 m) K857-1 for 100 ft. (30.5 m) Invertec® V205-T AC/DC One-Pak® Package For AC TIG welding with square wave performance use the AC generator of the engine-driven welder to supply the power. Easy setup. Includes torch, parts kit, regulator and hose kit, TwistMateTM torch adapter, work cable with Twist-Mate end, and foot Amptrol®. Requires the K1816-1 Full-KVA Adapter Kit. Order K2350-1 TIG OPTIONS Pro-Torch® PTA-26V TIG Torch Air-Cooled 200 amp torch equipped with valve for gas flow control. 25 ft. length. Order K1783-9 Full - KVA Adapter Kit Provides convenient connection of Lincoln Electric equipment having a 240V AC 1-phase plug (NEMA 650P) to the full-KVA receptacle on Lincoln engine-driven welders. Order K1816-1 Foot Amptrol Varies current while welding for making critical TIG welds and crater filling. Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the afterflow cycle. Includes 25 ft. (7.6 m) control cable. Order K870 WIRE FEEDERS LN-25 Wire Feeder Portable CC/CV unit for flux-cored and MIG welding. Includes Gas Solenoid & Internal Contactor. Order K449 Hand Amptrol Provides 25 ft. (7.6 m) of remote current control for TIG welding. (6 pin plug connection). Velcro straps secure torch. Order K963-3 (one size fits all ProTorch TIG torches). LN-15 Across-The-Arc Wire Feeder Portable CC/CV unit for flux-cored and MIG welding. Includes gas solenoid, adjustable flow meter and internal contactor. For 10-15 lb. (4.5-6.8 kg) spools. Order K1870-1 Magnum® Parts Kit for PTA-26V TIG Torch Magnum Parts Kit provides all the torch accessories you need to start welding. Parts kit provides collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable pack. Order KP509 Remote Voltage Control (LN-25) Provides 25 ft. (7.6m) of remote output control and output jumper (2 and 4) for machines having 14-pin MS-type connector. Order K444-2 Magnum® 350 Innershield Gun (for LN-25, LN-15) For self-shielded wire with 15 ft. (4.5 m) cable. For .062-3/32” (1.6-2.4 mm) wire. Order K126-2 Precision TIG® 225 Ready-Pak® For AC TIG welding with square wave performance, use the AC generator of the engine-driven welder to supply the power. Easy setup. Includes torch, foot amptrol, gas regulator and hose. Requires the K1816-1 Full KVA adapter kit. Order K2535-1 Drive Roll and Guide Tube Kit (for LN-25) For .068-3/32” (1.8-2.4 mm) cored or solid steel wire. Order KP653-3/32 Drive Roll and and Wire Guide Kit (for LN-15) For 1/16” (1.6 mm) cored wire. Order KP1697-1/16C [6] Ranger® 305G www.lincolnelectric.com RECOMMENDED OPTIONS WIRE FEEDERS CONT. WIRE FEEDERS CONT. Gun Receiver Bushing (For LN-15) For use with K126-2 Magnum 350 Innershield Gun. Order K1500-1 62º Gun Tube for Pipe Welding Recommended modification for K355-X or K345-X guns with 90º gun tubes. Allows more natural positioning for out-of-position pipe welding. Compatible with K126-1, K126-2, K264-8 and K355-10. Current capacity up to 350 amps. Recommended diameters: .062 3/32” (1.6-2.8 mm). Order KP1909-1 Magnum® 300 MIG Gun For .035-.045” (0.9-1.2 mm) gasshielded wire with 15 ft. (4.5 m) cable. LN-25 Order K1802-1 (includes Connector Kit) LN-15 Order: K470-2 Magnum 300 MIG Gun K466-10 Connector Kit Magnum SG Spool Gun Hand held semiautomatic wire feeder. Requires SG Control Module Order K487-25 Drive Roll and Guide Tube Kit (for LN-25) For .035-.040” (0.9-1.0 mm) solid steel wire Order KP653-035S SG Control Module The interface between the power source and the spool gun. Provides control of wire speed and gas flow. For use with a spool gun. Order K488 Drive Roll and Wire Guide Kit (for LN-15) For .035" (0.9 mm) solid steel wire. Order KP1696-035S Input Cable (For SG Control Module) For Lincoln engine power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and output stud connections. Order K691-10 LN-23P Wire Feeder Portable CV unit for Innershield pipe welding. Includes drive rolls and guide tubes. Requires K2393-1 or -2 Input Cable Assembly and Magnum® Innershield Gun. Order K316L-2 PLASMA CUTTING Pro-Cut® 55 Cuts metal using the AC generator power from the engine-driven welder. Maximum cut thickness is 9/16" (14 mm). Requires the K1816-1 Full-KVA Adapter Kit. Order K1580-1 Input Cable Assembly for LN-23P 8-socket to 14-pin control cable with lugged electrode cable for K316L-2 LN-23P Wire Feeder. Order: K2393-1 25 ft (7.6 m) K2393-2 75 ft (22.9 m) Full - KVA Adapter Kit Provides convenient connection of Lincoln Electric equipment having a 240V AC 1-phase plug (NEMA 650P) to the full-KVA receptacle on Lincoln engine-driven welders. Order K1816-1 Magnum® 250 Innershield Gun (for LN-23P) For lighter weight and easier handling. Rated 250 amps, 60% duty cycle. For .068 - 5/64” (1.7 - 2.0 mm) Innershield wire and includes reduced speed switch. For pipe welding, a KP1909-1 62° gun tube is recommended. Order K355-10 [7] Ranger® 305G www.lincolnelectric.com RANGER® 305G ORDER FORM PRODUCT DESCRIPTION ORDER NUMBER RANGER® 305G (Kohler Engine with Mechanical Fuel Pump) RANGER® 305G (Kohler Engine with Electric Fuel Pump) RANGER® 305G One-Pak® Package QUANTITY PRICE K1726-4 K1726-5 K2353-2 RECOMMENDED GENERAL OPTIONS Power Plug Kit (20 amp) Power Plug Kit (15 amp) Full KVA Power Plug GFCI 120V Receptacle Kit (two kits required) Spark Arrester Kit Canvas Cover Undercarriages All Terrain Factory - Welding Gas Cylinder / LPG Tank Holder (for K1770-1) - Cable Carrier Kit (for K1737-1 and K1770-1) - Roll Cage (attaches to K1737-1 and K1770-1 and K2635-1 trailer) Small Two Wheel Welder Trailer & Duo-Hitch™ - Available March 2007 - Fender and Light Kit - Cable Rack K1737-1 K1770-1 K1745-1 K1739-1 K1788-1 K2635-1 K2639-1 K2640-1 RECOMMENDED STICK OPTIONS Accessory Kit, 400 amp Accessory Kit, 150 amp Remote Control Kit, 25 ft. Remote Control Kit, 100 ft. K704 K875 K857 K857-1 RECOMMENDED TIG OPTIONS Pro-Torch® TIG Torch PTA-26V, 25 ft. Hand Amptrol (for larger handle 18, 26 torches) Foot Amptrol Magnum Parts Kit Precision TIG® 225 Ready-Pak® (for AC TIG welding) Invertec® V205-T AC/DC One-Pak® Package (For AC TIG welding) -Full KVA Adapter Kit (required for K2535-1 and K2350-1) K1783-9 K963-2 K870 KP509 K2535-1 K2350-1 K1816-1 RECOMMENDED WIRE FEEDERS LN-25 Wire Feeder with Contactor, Solenoid LN-15 Across-The-Arc Wire Feeder Remote Voltage Control, 25 ft. (LN-25 only) Magnum® 350 Innershield Gun Drive Roll and Guide Tube Kit (for LN-25) Drive Roll and Wire Guide Kit (LN-15) Gun Receiver Bushing (LN-15 and K126-2) Magnum® 300 MIG Gun (for LN-25) (includes Connector Kit) Magnum 300 MIG Gun (for LN-15) -Connector Kit (LN-15) Drive Roll and Guide Tube Kit (for LN-25) Drive Roll and Wire Guide Kit (for LN-15) LN-23P Wire Feeder - Input Cable Assembly 25 ft. - Input Cable Assembly 75 ft. Magnum® 250 Innershield® Welding Gun 62° Gun Tube for Pipe Welding Magnum SG Spool Gun - SG Control Module - Input Cable (For SG Control Module) K449 K1870-1 K444-2 K126-2 KP653-3/32 KP1697-1/16C K1500-1 K1802-1 K470-2 K466-10 KP653-035S KP1696-035S K316L-2 K2393-1 K2393-2 K355-10 KP1909-1 K487-25 K488 K691-10 RECOMMENDED PLASMA CUTTING OPTIONS Pro-Cut 55 - Full-KVA Adapter Kit (required) K1580-1 K1816-1 K802N K802R T12153-9 K1690-1 K1898-1 K886-2 TOTAL: C U S T O M E R A S S I S TA N C E P O L I C Y The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products. Lincoln Electric is a responsible manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements. Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information. T H E L I N C O L N E L E C T R I C C O M PA N Y 22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 About : uuid:ebf31470-afaa-11db-ad93-000393d5907e Producer : ApogeeX 2.5 Normalizer Keywords : Ranger; E6.117; stick welder; TIG welder; MIG welder; flux-cored welding; arc gouging; multi-process welder; Kohler; generator; engine driven welder Modify Date : 2007:02:05 11:48:36-05:00 Create Date : 2007:01:18 11:54:02-05:00 Creator Tool : QuarkXPress: pictwpstops filter 1.0 Metadata Date : 2007:02:05 11:48:36-05:00 Document ID : uuid:df8357a6-afaa-11db-ad93-000393d5907e Instance ID : uuid:cdd5118f-32bc-4159-aa8d-a526aa062a53 Format : application/pdf Title : Engine Driven Welders: Ranger 305G Description : The Ranger 305G is a powerful engine driven stick welder, TIG welder, wire and pipe welder that is ready for all day, everyday performance. Creator : ap Subject : Ranger, E6.117, stick welder, TIG welder, MIG welder, flux-cored welding, arc gouging, multi-process welder, Kohler, generator, engine driven welder Page Count : 8 Author : ap Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools