Linear Am Kp Exterior Keypad Quick Start Guide 211560E
AM-KP AM-KP
2014-07-19
: Linear Linear-Am-Kp-Exterior-Keypad-Quick-Start-Guide linear-am-kp-exterior-keypad-quick-start-guide linear pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
INTRODUCTION 1. AM-KP FEATURES The AM-KP keypad is designed for use with Linear’s AE1000Plus, AE2000Plus, and AM3Plus access control systems. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easyto-read yellow graphics. Each key has a positive tactile “click” feel when pressed. An internal sounder signals when a key is pressed. The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate. An incandescent panel lamp lights the keypad for nighttime use. Red, green and yellow indicators show power, access and lockout conditions. Access Control Keypad Installation Instructions 1 2 3 4 5 6 7 8 9 * 0 # The AM-KP is normally powered from the controller, or can be powered locally from a 12 VDC power supply. Robust static and lightning protection circuits safeguard the keypad’s electronics. A rotary switch selects the keypad’s PBUS device address. Each PBUS device connected to the controller must be set to a different PBUS device address. 1 2 3 4 5 6 7 8 9 * 0 # YELLOW "LOCKOUT" INDICATOR RED/GREEN POWER/ACCESS INDICATOR TACTILE KEYPAD POWER/DATA TERMINALS PBUS DEVICE ADDRESS SELECTOR (1-6) SOUNDER USA & Canada (800) 421-1587 & (800) 392-0123 (760) 438-7000 - Toll Free FAX (800) 468-1340 www.linearcorp.com KEYLOCK 2. PLAN INSTALLATION 3. MOUNT BACKPLATE PLAN THE LOCATIONS FOR CONTROL AND REMOTE DEVICES 4. ROUTE CABLE EACH AM-KP KEYPAD EQUALS 9 LOAD UNITS APARTMENTS CABLE LENGTH FORMULA FOR EACH KEYPAD USED IN SYSTEM CABLE RUN PLAN CABLE RUNS BETWEEN CONTROL AND REMOTE DEVICES APARTMENT GATE INSTALLATION CABLE TYPE AM-KP ON PEDESTAL CONTROLLER SERVICE LAB ENGINEERING BATH BATH COPIER AREA COMMERICAL INSTALLATION COMPUTER ROOM V.P. V.P. SALES WALL MOUNTING STOR. SALES PURCH. PRESIDENT CARD READERS (USING AM-CRI INTERFACE) MOUNT BACKPLATE WITH SECURITY BOLTS AND LOCKNUTS CHIEF ENG. LOBBY AM-KP ACCESS KEYPADS PEDESTAL USE CONCRETE WEDGE ANCHORS OR MOLLY ANCHORS FORMULA 300 FEET MAXIMUM BELDEN 9931 (24 AWG) FEET x LOAD UNITS < 3,000 MAXIMUM 500 FEET MAXIMUM WEICO 9405 (20 AWG) FEET x LOAD UNITS < 10,000 MAXIMUM CONTROLLER ACCOUNTING PRINTER’S INSTRUCTIONS: INSTL, INSTR, AM-KP- LINEAR P/N: 211560 E - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 11.000” X 8.500” - SCALE: 1-1 - SIDE 1 OF 2 AM-KP NIGHT LIGHT HOMERUN WIRE EACH KEYPAD (1000 FEET WIRE MAXIMUM ALLOWED IN SYSTEM) 5. CONNECT CABLE 6. SET PBUS DEVICE ADDRESS FOLLOW THIS WIRING DIAGRAM TO CONNECT THE KEYPAD TO THE CONTROLLER PWR GND DAT1 DAT0 DVAL PCLK PRINTER’S INSTRUCTIONS: INSTR, INSTR, AM-KP - LINEAR P/N: 211560 E - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 11.000” X 8.500” - SCALE: 1-1 - SIDE 2 OF 2 PWR GND AM-KP DAT1 TERMINALS DAT0 DVAL PCLK 7. SECURE & LOCK CASE USE A SMALL SCREWDRIVER TO SET THE PBUS DEVICE ADDRESS SWITCH ACCESS CONTROL SYSTEM PBUS TERMINALS EACH PBUS DEVICE MUST BE SET TO A UNIQUE NUMBER FROM 1 TO 6 ARROW ON SLOT POINTS TO NUMBER HOOK KEYPAD ONTO BACKPLATE AM-KP USE KEY TO LOCK KEYPAD FOR LOCAL POWER, DISCONNECT RED WIRE FROM "PWR" CONNECTION ON AM-KP AND CONNECT EXTERNAL 12 VDC SUPPLY (+ TO PWR & - TO GND) NOTE: CONTROLLER MUST BE CONNECTED TO AM-KP "GND" 8. PROGRAM SYSTEM 9. TEST KEYPAD LINEAR LIMITED WARRANTY PROGRAM THE CONTROLLER TO CONFIGURE THE REMOTE RECEIVER RED INDICATOR SHOULD TURN GREEN AND PROGRAMMED RELAY IN THE CONTROLLER SHOULD ACTIVATE REFER TO THE CONTROLLER PROGRAMMING INSTRUCTIONS FOR DETAILS 1 2 3 4 5 6 7 8 9 * 0 # This Linear product is warranted against defects in material and workmanship for twelve (12) months. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear LLC for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied warranties, including implied warranties for merchantability and implied warranties for fitness, are valid only until the warranty expires. This Linear LLC Warranty is in lieu of all other warranties express or implied. All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Linear Technical Services at 1-800-421-1587 for an RPA# and other important details Copyright © 2012 Linear LLC 211560 E
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:07:02 13:39:55-07:00 Create Date : 2012:06:27 11:37:53-07:00 Metadata Date : 2012:07:02 13:39:55-07:00 Format : application/pdf Title : 211560E.indd Creator : Copyright © 2012 Linear LLC Producer : Acrobat Distiller 9.5.1 (Windows) Keywords : Document ID : uuid:5abec794-1c1e-4c4c-8361-69c498008776 Instance ID : uuid:9bce07bc-94c1-49a0-8dc7-7f769806f42e Startup Profile : Print Page Count : 2 Author : Copyright © 2012 Linear LLC Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools