Linear Mdkp Exterior Wireless Keypad Quick Start Guide 217539a

Radio linear-mdkp-manual

: Linear Linear-Mdkp-Exterior-Wireless-Keypad-Quick-Start-Guide linear-mdkp-exterior-wireless-keypad-quick-start-guide linear pdf

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

MDKP

DESCRIPTION

1. COMPONENT LOCATIONS

The MDKP Wireless Keypad is one of Linear’s MegaCode® series of wireless radio controls designed for
use with automatic garage door and gate operators. The MegaCode radio format provides unparalleled
security with more than a million different codes.

ANTENNA
(HIDDEN)

In operation, the user enters their unique code (1 to 6 digits long) on the unit’s keypad then presses
the “#” key to send a signal to the door or gate operator receiver.

WIRELESS KEYPAD
TRANSMITTER

The MDKP can be illuminated for use at night or in dark areas. Pressing the “#” key before entering a code
turns on two yellow lights that shine down on the keypad’s keys. To illuminate the keypad after beginning
to enter a code, press the “#” key twice, then re-enter the entire code. The keypad lights remain on for
30-seconds, or until a code is sent.
The option jumper controls two features, the keypad lockout timer and the 30-second repeat feature. The
keypad lockout timer will disable the keypad after 10 repeated activations. The keypad must remain idle
for 30 seconds before any new code attempts are accepted. The 30-second repeat feature allows the
user to press the “#” key again within 30 seconds to send another signal without having to re-enter their
code. These features are available only when option jumper is installed. NOTE: Having the option jumper
installed will reduce the unit’s battery life. The MDKP is powered by a 9-volt lithium battery. Without the
option jumper installed the battery life is expected to be 5 years with 25 activations-a-day.

Installation Instructions

(760) 438-7000 • FAX (760) 438-7043
USA & Canada (800) 421-1587 & (800) 392-0123
Toll Free FAX (800) 468-1340
www.linearcorp.com

2. KEYPAD MOUNTING

MegaCode receivers are programmed by sending a signal from the user’s transmitters. This stores the
transmitter’s code into the receiver’s memory. The receiver will only activate from these “memorized”
transmitters. Each code entered on the MDKP keypad will appear to the receiver as a unique MegaCode
transmitter. MegaCode receivers have limits on the number of transmitters that can be programmed
into them. Any combination of portable transmitters and keypad codes up to the maximum number of
transmitters allowed can be programmed into a receiver.

3. CONNECT BATTERY

PEDESTAL
MOUNTING

SOUNDER

OPTION
JUMPER

DOWN
LIGHTS

TACTILE
KEYPAD

KEYLOCK

9-VOLT
LITHIUM
BATTERY

4. SET JUMPER & LOCK KEYPAD

WALL MOUNTING

CONNECT THE 9-VOLT BATTERY
TO THE BATTERY CLIP

THE OPTION JUMPER CAN BE INSTALLED TO ENABLE
THE KEYPAD LOCKOUT TIMER AND THE 30-SECOND
REPEAT FEATURE (PUT JUMPER BLOCK ON BOTH PINS)

WHEN INSTALLATION
IS COMPLETE, HOOK
KEYPAD ONTO BACKPLATE

NOTE: FOR MAXIMUM BATTERY
LIFE, USE A 9-VOLT LITHIUM
BATTERY ONLY.
MOUNT BACKPLATE WITH
SECURITY BOLTS AND LOCKNUTS

USE CONCRETE
WEDGE ANCHORS
OR MOLLY ANCHORS

WARNING!
INSTALLING THE OPTION JUMPER WILL KEEP THE KEYPAD
POWERED FOR 30 SECONDS AFTER PRESSING THE "#" KEY.
THIS ALLOWS THE USER TO PRESS THE "#" KEY AGAIN
(WITHIN 30 SECONDS) TO SEND ANOTHER SIGNAL WITHOUT
HAVING TO RE-ENTER THEIR CODE.

SLIDE THE BATTERY INTO THE
BATTERY RETAINING CLAMP

TO AVOID SERIOUS INJURY OR DEATH, MAKE SURE THAT THE UNIT IS FAR ENOUGH FROM
THE DOOR OR GATE SO THAT THE USER CANNOT TOUCH THE DOOR OR GATE WHILE
OPERATING THE KEYPAD. HOWEVER, THE DOOR OR GATE MUST BE FULLY VISIBLE
FROM THE KEYPAD.

5. PROGRAM RECEIVER
1

NOTE: BATTERY LIFE WILL BE REDUCED WITH THE OPTION JUMPER INSTALLED

6. TEST OPERATION

LINEAR LIMITED WARRANTY
WARNING!
BE SURE DOOR OR GATE
AREA IS CLEAR OF OBSTRUCTIONS

REFER TO THE RECEIVER'S INSTRUCTIONS
TO PLACE THE RECEIVER INTO PROGRAM MODE

TRY EACH KEYPAD CODE
THE DOOR OR GATE OPERATOR SHOULD
ACTIVATE WHEN THE "#" KEY IS PRESSED
AFTER ENTERING A VALID KEYPAD CODE
IN THESE EXAMPLES, THE USER'S SECRET
CODE IS: 1, 2, 3
DAYTIME OPERATION:
TO CLEAR KEYPAD
AT ANY TIME:

PRESS:
USER'S SECRET CODE

3

SEND

PRESS:

PRESS THE "#" KEY TO SEND THE
CODE TO THE RECEIVER

NIGHTTIME OPERATION:

2

ENTER A ONE TO SIX DIGIT CODE

4

217539a.indd

1

REPEAT STEPS ONE, TWO, AND
THREE TO ADD ADDITIONAL CODES
INTO THE RECEIVER'S MEMORY

USE KEY TO
LOCK KEYPAD

INSTALLING THE OPTION JUMPER ALSO ENABLES THE KEYPAD
LOCKOUT TIMER. THE KEYPAD WILL DISABLE ITSELF AFTER
10 ATTEMPTS UNTIL IT IS IDLE FOR AT LEAST 30 SECONDS.

PRESS:
LIGHTS
KEYPAD

USER'S SECRET CODE

SEND

This Linear product is warranted against defects in material and workmanship for twelve (12)
months. The Warranty Expiration Date is labeled on the product. This warranty extends only
to wholesale customers who buy direct from Linear or through Linear’s normal distribution
channels. Linear does not warrant this product to consumers. Consumers should inquire
from their selling dealer as to the nature of the dealer’s warranty, if any. There are no
obligations or liabilities on the part of Linear Corporation for consequential damages
arising out of or in connection with use or performance of this product or other
indirect damages with respect to loss of property, revenue, or profit, or cost of
removal, installation, or reinstallation. All implied warranties, including implied warranties
for merchantability and implied warranties for fitness, are valid only until Warranty Expiration
Date as labeled on the product. This Linear Corporation Warranty is in lieu of all other
warranties express or implied.
All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact
Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.
IMPORTANT!
• For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15
devices. As such, they have limited transmitter power and therefore limited range.
• A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals
that occur on or near their operating frequencies, regardless of code settings.
• Changes or modifications to the device may void FCC compliance.
• Infrequently used radio links should be tested regularly to protect against undetected interference or fault.
• A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or
dealer, and these facts should be communicated to the ultimate users.
Copyright © 2000 Linear Corporation

217539 A

07/06/00, 1:46 PM



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2000:07:06 13:46:59
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : Copyright © 2000 Linear Corporation
Creator                         : ADOBEPS4.DRV Version 4.30
Title                           : 217539a.indd
Modify Date                     : 2000:08:25 10:29:14-07:00
Subject                         : INSTR,INSTL,MDKP,RF KEYPAD
Page Count                      : 1

EXIF Metadata provided by EXIF.tools