Lingan Intelligent Technology SWB1 Wi-Fi Smart Power Strip User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3453950
Application ID	hf2cc8792nmtiLryyL6iIA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.87kB (85859 bits)
Date Submitted	2017-07-06 00:00:00
Date Available	2017-07-06 00:00:00
Creation Date	2017-06-30 14:02:53
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-07-05 08:47:14
Document Title	Users Manual
Document Creator	CorelDRAW
Document Author:	Administrator

Dear Users:
Wi-Fi Smart Power Strip
User Manual
(Model: SWB1)
·Security mechanism:WEP/WPA-PSK/WPA2-PSK
Thank you very much for choosing our company's Wi-Fi smart
power strip, and this product adopts the current emerging Wi-Fi
technology and top manufacturing process, which is developed
integrating years of R&D experience. The product can support
mobile APP to perform local and remote control of electrical
device at home (such as lighting, electric fan, humidifier, etc.).
For proper installation and usage of the product, please read
this instruction carefully.
Scan the QR code on the User Manual to download the App,
open the app, click “Register ”, Enter your phone number (Select
your country code, so that you can receive a verification code.)
Then enter the verification code.
l. Product Features
Set your password with 8 to 20 alphanumeric
III. APP Operation
NOTE: Before device connection, it is required to reset the device
1. Support Wi-Fi2.4GHz 802.11 b/g/n wireless network.
2. SmartLink flash connection net in.
3. Status indication.
4. Power consumption indicator. (Optional)
5. Support remote / local control through Wi-Fi
networks.
6. The output can be controlled individually.
7. Support USB output.(Optional)
(See FAQs for reset method)
See specific operation on << Operation Instruction>>
ll. Product Parameters
·Voltage: AC 100-240V
·Current: 10A
·Rated frequency: 50 / 60Hz
·USB output: 5V / 1A per port (Optional)
·Product size: 260 x 60 x 26mm
·Working environment: Indoor
·Working temperature: -10~45°C
·Humidity:≤80% RH
·Security type:WEP64/WEP128/TKIP/CCMP(AES)
IV. FAQs
Q： What should I do if I cannot connect the Wi-Fi smart power
strip?
A: a. Check whether the devices are connected to the same Wi-Fi
on which your smart phone is connected.
b. Check whether the password of the Quick configuration
entered is correct.
c. Reset the device.
d. Reboot the device.
Q: How do I reset the device?
A: Under power-on status, press and hold the power button 6
seconds until the indicator light fast blink.
Q: I have accessed the device, but I cannot control electrical
appliances, what should I do?
A: a. Check whether the electrical appliances are connected to
power supply.
b. Check whether your mobile phone has normal network
access.
V．Instructions
The one year warranty of our company's product only applies to
the situation that all the operations comply with the
instructions. The following situations are not covered by the
warranty:
1. Any change, correction, abridged or illegible handwriting on
the purchase tags or product instructions.
2. Malfunction caused by damage, incorrect connection or
misusage.
3. Undesirable phenomena due to the extreme environment
rather than the inherent causes of this product (such as
lightning, flood,fire, etc) .
( Scan QR Code to find the Operation Instruction )
To maintain compliance with FCC's RF Exposure guidelines, This
equipment should be installed and operated with minimum
distance between 20cm the radiator your body: Use only the
supplied antenna.
FCC ID: 2A JK8-SWB1
4. This product has been opened or disassembled.
5. Badness caused by any usage, maintenance or custody not
according to the product specifications (such as moisture,
corrosion).
6. Product badness, appearance deformation, appearance
damage or any other physical damage caused by external forces.
VI. Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the
party responsible for compliance
could void the user's authority to operate the equipment.
If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
iOS APP
Android APP
( Scan QR Code to download our APP )

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : 排插使用说明英文认证用的.cdr
Create Date                     : 2017:06:30 14:02:53+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2017:07:05 08:47:14+08:00
Metadata Date                   : 2017:07:05 08:47:14+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:9b0b5c25-93b8-49fc-9c5f-cd3c5a77f984
Instance ID                     : uuid:c24c8026-d008-4422-9c0c-bc50af2eb24e
Page Count                      : 1
Author                          : Administrator

EXIF Metadata provided by EXIF.tools