Linpa Technology LBS18 BT HEADPHONE User Manual
Shenzhen Linpa Technology Co.,Ltd BT HEADPHONE Users Manual
Users Manual
LBS18 user manual
1. Location of controls
A. quick press：previous song long press：increase volume
B. Quick: play/pause
C. quick press：next song long press: decrease volume
D. long press: ON/OFF quick press: answer/end call double press: dial/reject call
E. AUX-IN
F. USB charging port
2.Pair the headphone with a Bluetooth enabled device
Turn the headphone On by long press the power switch, the LED indicator light will quickly blink
BLUE.
Keep your Bluetooth headphone and Bluetooth enabled device within 3feet of each other during the
pairing process, set your mobile phone or other Bluetooth enabled device to search for Bluetooth
devices.
When the Bluetooth enabled device finds the headphone, select” PBT98”from the list of found
devices. If required, enter the password 0000.Select Ok or Yes to pair with your device.
After a successful registration, the LED indicator light will slowly blink BLUE.
Note: if you would like to connect the headphones to another device, you must unpair the
headphones from the currently paired device first. On your device’s Bluetooth settings, select
“PBT91”, then select “unpair”. When the headphones have been unpaired, it automatically goes
into pairing mode again.
3.using as a wired headphone
Connect the one end of the included 3.5mm Aux cable to the Aux In jack on the headphone, and the
other end of the cable to an external device’s headphone jack (smartphone,tablet,computer,or MP3
player).Open a media player on your device and click on play to start playing your music. Use the
controls on your connected device to control music playback and volume.
4. Charging the Bluetooth headphone
Connect the small end of the Micro USB cable to the charging port on the headphone. Connect the
large end of the Micro USB cable to your computer’s USB port or an AC adaptor (not included).
The LED indicator light turns RED when charging. It will turn off when fully charged.
5. FCC warning
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.