Linpa Technology LBS51 Bluetooth Speaker User Manual
Shenzhen Linpa Technology Co.,Ltd Bluetooth Speaker Users Manual
User manual
LBS51 manual
一：Button Function
A B C
A：Audio input port
B：USB charging port
C：Power on
二：Function:
1：Bluetooth Pairing
When turned on, blue lights flash quickly, enter into pairing status, then you can open the
Bluetooth function, start searching.
When found “LBS51”, Bluetooth paired successfully. If needs to use the password, please try to
use “ 0000”, press confirm, waiting for connecting.
When paired the Bluetooth successfully, the blue light flashes slowly, now you can enjoy the
music.
Remarks: Multimedia devices have memory function, after the first successful connection, the
second connection does not need to set up again, the headset will automatically connect to the last
device has been connected before.
2：Audio input: When inserted the external audio source, which can be entered through the audio cable
to the speaker.
3：Charging
When the battery is low, there will be a tone, you can use a USB port to charge, during the
charging , the red light is on, charging full, the red light is off.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used i
n portable exposure condition without restriction.