Linpa Technology LBS52 Wireless microphone with speaker User Manual
Shenzhen Linpa Technology Co.,Ltd Wireless microphone with speaker Users Manual
User Manual
LBT502 manual
一：button indication.：
A B C D E F
A：Long press power on, Quick press play/pause.
B：Echo volume controls
C：Voice volume controls
D：USB charging port
E：Audio output
F：Mic
二：Function:
1：Bluetooth Pairing
When turned on, blue lights flash quickly, enter into pairing status, then you can open the
Bluetooth function, start searching.
When found “ LBT502”, Bluetooth paired successfully. If needs to use the password, please try
to use “ 0000”, press confirm, waiting for connecting.
When paired the Bluetooth successfully, the blue light flashes slowly, now you can enjoy the
music.
Remarks: Multimedia devices have memory function, after the first successful connection, the
second connection does not need to set up again, the headset will automatically connect to the last
device has been connected before.
2：Audio output function
Microphone sound through the headphone cable, can put your own singing voice, reached
inside the headphone.
3：Charging
When the battery is low, there will be a tone, you can use a USB port to charge, during the
charging , the red light is on, charging full, the red light is off.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.