Linpa Technology LBS63 Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3008899
Application ID	5H7HCmnJowa7BXlw6veYGg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.46kB (818202 bits)
Date Submitted	2016-05-30 00:00:00
Date Available	2016-05-30 00:00:00
Creation Date	2016-05-27 11:08:34
Document Lastmod	2016-05-27 11:08:34
Document Title	User Manual
Document Creator	WPS Office

01 In the Box
3.5mm
Auxiliary cable
F Body
02 Location of Controls
FNM
1.5peaket Driver
21-h) buflon:
3‘[ >- lbuflon:
4‘lmlbutton:
Back
5‘ [ON/OFF] switch
6. LED indicator
7. AUX pt)“
8. Conneded AC
power cable
O3 Assembling the Lamp
1. Carefully remove the {litter
Lamp from the packaging and
be sure to assemble the
lamp on a flat surface.
2. Place the Lamp Body on to
the base. Be sure to twist
gently until tight.
04 Pairing the Speaker
3. Place the Lamp Cap on top of
the Lamp Body.
4. Plug In the lamp and use the
power swatch to turn ON.
1. Slide the [ON/OFF] switch to the ON position. A tone is
heard and the LED indicator will quickly flash BLUE.
2. Set your mobile phone or other BIuetaoth-enabled
device to search for the speaker (for detailed instructions
for pairing your BIuetooth-enabled device. consult your
devlce’s user documentation),
3. Locate LBTSOS from the list of found devices.
4. It required, enter the password 0000. Select YES or 0K to
pair with your device.
5. After a successful pairing. a tone is heard and the LED
lndlcator will slowly flash BLUE.
05 Using the Speaker
Powering the Speaker ON and OFF
- Slide the [ON/OFF] switch to the right to turn the speaker
on.
. Slide the [ON/OFF] switch to the left to turn the speaker
off.
Controlllng the Volume
. Long press the [=M] button to decrease the volume,
. Quick press the [ W 1 button to increase the volume
Playing Music
itQuick press the Han] button to replay the previous track.
2. Quick press the [M91 button to skip to the next track in
your music playlist
3‘ Quick press the [ DI ] button to pause and resume your
muslct
- Long press to - Lon ress to
decrease the vohrnet Magi; the vdurne.
~Quickpresstore .Qulckpresstoski to
the previous ”all“:y the n .. track. p
- Quick press to pause music
. Quick press again to resume music playback
06 Using the Speaker
Using as a Wired Speaker
1. Sllde the [ON/OFF] switch to the ON position.
2. Connect one end 0' the 15mm auxiliary cable Into the
AUX port on the speaker, A tone is heard. indicating that
the speaker is in AUX mode.
3‘ Insert the other end of the 35mm auxiliary cable Into the
headphonejack of your smartphone. tablet or MP3 player.
NOTE: Use your mobile device to control the
vnlmne and music playback
06 Legal Information
FCC Part ‘is:
This equipment has been tested and found to comply with the
requirements for a Class B digital device under Part 15 of the Federal
Communications Commission (FCC) rules. These requirements are
intended to provide reasonable protection against harmful
interference in a residential installation.This equipment generates.
uses and can radiate radio frequency energy and, If not installed and
used in accordance with the instructions. may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
if this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
~ Re-orient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for
help.
Do not attempt to repair or modify this equipment.
Warning: Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
”This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(i) this device may not cause harmful interference, and
(2) this device must accept any interference received. including
interference that may cause undesired operation."
07 Safety Information
GLITTER LAMP CARE AND CAUHONS
BE SURE TO READ AND SAVE THESE INSTRUCHONS
CALL 1—577-765—8481 FOR A REPLACEMENT BOTTLE OR ADAPTOR. DO NOT USE
UNAUTHORIZED PRODUCTS IN THIS LAMP.
CAUTION
The Glitter lamp ls designed to operate In an average room temperature of 22-25 'c
(71 .6—77'f). Make sure the Glitter lamp is at room temperature before starting. Always operate
the Motion lamp on a firm, stationary surface. Do not operate the lamp on any warm or hot
surfaces.
Initial warm up of the Glitter lamp will take 3 to 5 hours. Subsequent warm ups will take less
time depending on the room temperature.The Glitter lamp 'II function best if It is operated
no longerthan 10 hours at a time. rhe Glitter lamp’s function will be achieved rully after lamp
has been used 5 to 6 times.
The lamp should never be operated ror more than 24 hours at a time. lroperated for more
than 24 hours the base can get deformed from heat.
Do not add anyflulds or solids to your lamp.The air space at the top of the lamp has been
provided to allow for expansion.
Do not place near sources of heat or cold such as heat and air conditioning vents. Always
operate the lamp only on room temperature surfaces.
The Glitter lamp operates at a very warm temperature and the vessel Is made of glass.
Operate out of the reach of small children and pets.
DO not leave the Glitter lamp unattended. do not run the Glitter lamp while sleeping, as this
is a novelty item and is not intended to be used as a night light.
The lamp and speaker base will be Warm to the touch while in use and after the unit has been
turned off/unplugged. Do not touch the lamp’s heating element while it Is on.
Keep out of the reach of children and pets.
While Glitter lamp is in operation, be sure not to move or shake it in order to avoid
permanently damaging the lamp. Glitterlamp should never be heated by any other means,
nor should it be cooled artificially. Do not operate the lamp ifthe glass is cracked or
damaged.
If the Glitter lamp is cracked or damamged, disconnectthe lamp from the power outlet and
clean the surface thouroughly. Clean the affected area thoroughly with soap and water.
Remove and wash contaminated clothing,
The space on the top of the lamp is provided for expansion. Do not break the seal ofthe cap
to fill it with liquid or solid. Breaking the seal will void your warranty and ruin the product.
lfthe external flexible cable or cord of the base Is damaged, do not attempt to replace lt
yourself. It should be replaced by the manufacturer, service agent or a similar qualified person
in order to avoid a hazard. Call
1-877-768-8481 for replacement.
08 Limited Warranty
90 Days Limited Warranty
In the unlikely event that this product is defective, or does
not perform properly, you may within ninety (90) days from
your original date of purchase return it to the authorized
service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
0 Call the Customer Support number located below, or go
to our website portal to receive an SRO number.
0 Provide proof of the date of purchase within the package
(dated bill of sale).
Write the SRO number on the package before shipping.
0 Prepay all shipping costs to the authorized service center,
and remember to insure your return.
0 Include a return shipping address (no PO. Boxes), a
telephone contact number, and the defective unit within
the package.
0 Describe the defect or reason you are returning the
product.
Your product will be repaired or replaced, at our option, for
the same or similar model of equal value if examination by
the service center determines this product is defective.
Products received damaged as a result of shipping will
require you to file a claim with the carrier.
The shipping address of the authorized service center is:
893 Southern Telecom, Inc.
Attention: Customer Service (2nd Floor)
14-C 53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this
product, please contact our customer service department at:
Customer Support:
8 Phone: 1-877-768-8481
Monday-Friday 8AM-10PM(EST)
I www.50utherntelecom.com
Click on ”Product Support”
Warranty service not provided
This warranty does not cover damage resulting from
accident, misuse, abuse, improper installation or operation,
lack of reasonable care, and unauthorized modification.This
warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being
returned to the authorized service center for repair must be
suitably packaged.
Limitation of Warra nty:
- THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY
APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY AIT, INC. IT'S AGENTS, OR
EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY.
- REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BYTHE LAWS OF THE STATE OF NEW YORK.
EXCEPTTO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of
incidental or consequential damages, or limations on how
long an implied warranty lasts so the above limitations on
exclusions may not apply to you.This warranty gives you
specific legal rights, and you also may have other rights that
vary from state to state.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 8
Author                          : 
Comments                        : 
Company                         : 
Create Date                     : 2016:05:27 11:08:34+03:08
Creator                         : WPS Office
Modify Date                     : 2016:05:27 11:08:34+03:08
Producer                        : 
Source Modified                 : D:20160527110834+03'08'
Subject                         : 
Title                           : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools