Linpa Technology LBS67 Bluetooth Headset User Manual UserManual

Download:
Mirror Download [FCC.gov]
Document ID	3196203
Application ID	c1ZXO6raOmbdf9P1tGGx+A==
Document Description	UserManual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	190.87kB (2385869 bits)
Date Submitted	2016-11-15 00:00:00
Date Available	2016-11-15 00:00:00
Creation Date	2017-12-17 18:27:52
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-17 18:27:52
Document Title	UserManual
Document Creator	Adobe Acrobat 9.0

SBT565 User Manual
Noise-Cancelling
Wireless Headphones
User Guide
SBT565
In the Box
Micro USB
Charging Cable
3.5mm Auxiliary
Wireless
Headphones Cable
Location of Controls
(Right earpiece — Front)
1. HF] Button
2. [ND] Button
3. [2] Button
(Right earpiece - Back)
4. Noise-Cancelling Switch
(Left earpiece - Bottom)
5. USB Charging Port
6. Microphones
(Right Earpiece — Bottom)
7. AUX—In Jack
FRONT
Pairing the Headphones
1. Long press the [ND] button to power the headphones ON.
The LED indicator will quickly flash RED and BLUE and a
tone will be heard.
2. Set your BIuetooth-enabled device to search for Bluetooth
devices. When the BIuetooth-enabled device finds the
headphones, select ”SBT565” from the list of found devices.
3. After a successful pairing, a tone will be heard indicating
that the device is paired and the LED indicator will flash
BLUE, intermittently.
G)
On an iOS or Android Device
. Go to SETTINGS > BLUETOOTH
(Make sure BIuetooth is turned ON)
(— BIuetooth
Settings BIuetooth
! in
BIuetooth O Paired devices
0 SBT565
MY DEVICES
SBT565 Connected 6)
Available devices
OTHER DEVICES
CD
Charging the Headphones
To charge the headphones, attach the small end of the micro
USB cable to the USB charging port on the underside of the
earpiece. Attach the large end to a USB adaptor, battery pack, or
USB port on a computer.
The LED indicator will turn RED while charging and turn off
when fully charged.
Using the Headphones
Powering ON/OFF
-To turn the headphones ON or OFF, long press the [tilt]
button.
Adjusting Volume
- Long press the [le button to increase volume. A tone will
be heard if you attempt to increase the volume past
maximum level.
- Long press the [r] button to decrease volume.
Enabling/Disabling Noise-Cancelling
-To enable the noise-cancelling function on the headphones,
move the noise-cancelling switch on the back side of the
earpiece to the down-position.
The switch will turn BLUE while
noise—cancelling is enabled.
- To disable, move the noise-
cancelling switch to the up—
osition. , ,
p (Right earpiece - Back)
Playing Media
To enjoy music on your headphones, make sure you are
paired to a BIuetooth-enabled device. Once paired, you can
control media playback and volume adjustment with the
controls on your paired device or with the headphones.
PIaying/Pausing Media
-To pause media playback, press the [lil‘:>] button.
-To resume media playback, press the [fili>] button, again.
Skipping Tracks
- To skip to the previous track, quick press the [:] button.
- To skip to the next track, quick press the [Lg] button.
Answering/Ending Phone Calls
-To answer an incoming phone call, quick press the [lib]
button.
- To end a phone call, quick press the [ll'>] button, again.
Redialing Last Incoming Phone Call
- Double press the [lililitr] button to redial the last incoming
phonecaw
Using as Wired Headphones
To use the headphones with a device’s headphonejack, attach
the 3.5mm auxiliary cable to the head phone's AUX-In jack, then
attach the other end to the headphonejack on a media device.
All media playback and volume adjustment is controlled by the
connected device’s controls. The noise—cancelling switch will still
function when the headphones are connected via the 3.5mm
auxiliary cable.
/—\/—\. E
n \¢//
m...
BACK
Questions and Customer Support
For further assistance or troubleshooting, please call
our customer support line:
“E Phone: 1—877—768—8481
Monday-Friday 8AM-i 0PM (EST)
g www.southernte|ecom.com
Click on ”Product Support”
Legal Information
READ CAREFULLY AND KEEP THIS MANUAL
Caution: Any changes or modifications not expressly
approved could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undersired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. Ifthis equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
. Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
The device has been evaluated to meet general RF exposure requirement.
Limited Warranty
90 Days Limited Warranty
In the unlikely event that this product is defective, or does
not perform properly, you may within ninety (90) days from
your original date of purchase return it to the authorized
service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
0 Call the Customer Support number located below, or go
to our website portal to receive an SRO number.
0 Provide proof of the date of purchase within the package
(dated bill of sale).
0 Prepay all shipping costs to the authorized service center,
and remember to insure your return.
0 Include a return shipping address (no PO. Boxes), a
telephone contact number, and the defective unit within
the package.
0 Describe the defect or reason you are returning the
product.
Your product will be repaired or replaced, at our option, for
the same or similar model of equal value if examination by
the service center determines this product is defective.
Products received damaged as a result of shipping will
require you to file a claim with the carrier.
The shipping address of the authorized service center is:
QB Customer Service Dept. 36
do Southern Telecom
400 Kennedy Drive
Sayreville NJ 08872
Should you have any questions or problems concerning this
product, please contact our customer service department at:
Customer Support:
a? Phone: 1—877—768—8481
Monday-Friday 8AM-10PM(EST)
g www.southerntelecom.com
Click on ”Product Support”
The device can be used in portable exposure condition without restriction. warranty service “Ot provided
This warranty does not cover damage resulting from
accident, misuse, abuse, improper installation or operation,
lack of reasonable care, and unauthorized modification.This
warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being
returned to the authorized service center for repair must be
suitably packaged.
Limitation of Warranty:
. THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY
APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY AIT, INC. ITS AGENTS, OR
EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY.
- REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BY THE LAWS OF THE STATE OF NEW YORK.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of
incidental or consequential damages, or Iimations on how
long an implied warranty lasts so the above limitations on
exclusions may not apply to you. This warranty gives you
specific legal rights, and you also may have other rights that
vary from state to state.
Sharper Image® name and logo are registered trademarks. Manufactured
and marketed by Southern Telecom under license. © Sharper Image.
All Rights Reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:301312f4-a709-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:22 14:47:09Z
Create Date                     : 2017:07:22 14:47:09Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:301312f4-a709-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools