Linpa Technology LBS85 Bluetooth Headphone User Manual SBT659 FINAL REVISED MANUAL OL 03 24 17

Shenzhen Linpa Technology Co.,Ltd Bluetooth Headphone SBT659 FINAL REVISED MANUAL OL 03 24 17

User Manual

Download: Linpa Technology LBS85 Bluetooth Headphone User Manual SBT659 FINAL REVISED MANUAL OL 03 24 17
Mirror Download [FCC.gov]Linpa Technology LBS85 Bluetooth Headphone User Manual SBT659 FINAL REVISED MANUAL OL 03 24 17
Document ID3397257
Application ID9tm0Fx6PiosCISK4q66igw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize187.25kB (2340595 bits)
Date Submitted2017-05-19 00:00:00
Date Available2017-05-19 00:00:00
Creation Date2017-10-24 14:45:53
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-24 14:45:53
Document TitleSBT659_FINAL_REVISED_MANUAL_OL_03-24-17
Document CreatorAdobe Photoshop CS

SBT659 User Manual
FRONT
ng the Headphones
SIIIIII'III Pa'
I" I E In 1. Long press the [MI button on the side of the
headphones . A tone will be heard and the LED
Bluetooth Headphone indicator will quickly flash RED and BLUE.
2. Set your Bluetooth-enabled device to search for
Bluetooth devices. when your mobile Bluetooth-
enabled device finds the headphones, select
"SBT659"from the list of found devices.
3. After a successful pairing, a voice will be heard and
the LED indicator will slowly flash BLUE.
lfa previously paired device is in range when the
headphones are turned on, they will connect to it
automatically.
On an ios or Android Device
- Go to SETTINGS > BLUETOOTH
(Make sure Bluetooth is turned ON)
(}
. t... M... .
User Gurde M. o
SBT659 W... 1::
3“ Micro USB ., r /
3‘ Charging Cable \L/ K
Thesaeel'lshosaboveare typicalofmarrvBluetooth-en—
abled devices in the market today, and are used to
assist in the explanation of the pairing process. Your
BIuetooth—enahled device’s interface and interaction
with theheodphones may differslightly from the
Wireless §:5mm illustrations above.
Headphones Auxrllary Cable
n of Co rols Charg ng the Headphones
Attach the small end ofthe micro USB cable to the micro USB
port. Connect the large end to your computer or other USB
charging device/adaptor. The LED indicator will turn solid
. __ RED while charging and turn BLUE when fully charged.
I. Microphone
2. Micro USB charging port Micro U53
3. AUXrIN jack c°mP"'°' Charging Port
4. LED indicator 3 a
5. [B] button '
6. [V] button
7. [A] button %
Make sure you charge your headphones for at least
1 - 2 hours before using them for the first time.
U 9 the Headphones
Powering ONIOFF
«Turn the device ON by long pressing the M] Button. A
tone will indicate that the headphones are powered 0N.
-Turn the device OFF by long pressing the [M] Button. A
tone will indicate that the headphones are powered OFF.
NOTE: The headphones will go into sleep mode after a
period ofinactivity. While in sleep mode,the LED indicator
will flash BLUE intermittently.To wake the device
press the [ M ] button.
Answering Phone Calls
-To answer a phone call quick press the [a] button.
.To hang up, quick press the [M] button. Music playback
will automatically resume.
Playing Musk
To enjoy music wirelessly on your headphones, make sure
that they are properly paired to your BIuetooth-enabled
device. Ifyou are pairing the device for the first time, please
consult the“Pairing the headphones"part ofthis user guide.
Playing/Pausing Music
. Quick press the [M button to pause the music.
- Quick press the [MI button again to resume music
playback.
Skipping Songs
- Quick press the [A] button to go to the previous song.
- Quick press the [VI button to go to the next song.
Adjusting the Volume
. Long press the [V] to decrease the volume of music
playback.
. Long press the [A] to increase the volume of music
playback.
Ques ons and Customer Support
For further assistance or troubleshooting, please call
our customer support line:
3 Phone: 1-877-768-5481
Monday-Friday SAM-10PM (EST)
I www.southernte|ecom.com
Click on ”Product Support"
BACK
Legal Information ed Warranty
READ CAREFULLY AND KEEP THIS MANUAL
Caution: Any changes or modifications not expressly
approved could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including Interference that may cause undersired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential Installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However. there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio ortelevision reception, which can be
determined by turning the equipment offand on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and
receiver.
. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
The device has been evaluated to meet general RF
exposure requirement. The devlce can be used In
portable exposure condltlon without restriction.
90 Days Limited Warranty
In the unlikely event that this product is defective, or does
not perform properly, you may within ninety (90] days from
your original date of purchase return it to the authorized
service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
o Call the Customer Support number located below, or go
to our website portal to receive an SRO number.
0 Provide proof of the date of purchase within the package
[dated bill ofsale).
I Prepay all shipping costs to the authorized service center,
and remember to insure your return.
0 Includea return shipping address (no P.O. Boxes). a
telephone contact number, and the defective unit within
the package.
0 Describe the defect or reason you are returning the
product.
Your product will be repaired or replaced, at our option, for
the same or similar model orequal value ifexamination by
the service center determines this product is defective.
Products received damaged as a result or shipping will
require you to file a claim with the carrier.
The shipping address ofthe authorized service center is:
Q3 Customer Service Dept. 36
c/o Southern Telecom
400 Kennedy Drive
Sayreville NJ 08872
Should you have any questions or problems concerning this
product, please contact our customer service department at:
Customer Support:
g Phone: 877-768—8481
Monday Friday BAM-loPMIEST)
l www.southerntelecom.com
Click on ”Product Support"
Warranty service not provided
This warranty does not cover damage resulting from
accident, misuse, abuse, improper installation or operation,
lack of reasonable care, and unauthorized modificationThls
warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being
returned to the authorized service center for repair must be
suitably packaged.
Limitation of Warranty:
- THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY
APPLICABLE TOTHIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED [INCLUDING ALL IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY AIT. INC. ITS AGENTS, OR
EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASETHE SCOPE OFTHIS WARRANTY
- REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
AIT. INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES RESULTING FROM THE USE OFTHIS
PRODUCT OR ARISING OUTOF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCTTHIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BYTHE LAWS OFTHE STATE OF NEW YORK.
EXCEPTTO THE EXTENT PROHIBITED BY APPLICABLE LAW.
ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of
Incidental or consequential damages, or llmations on how
long an implied warranty lasts so the above limitations on
exclusions may not apply to you. This warranty gives you
specific legal rights, and you also may have other rights that
vary from state to state.
Sharperlmage’ name “a logoare registered trademarks. Manufactured
and marketed bysouthernTelecorn under license. 0 Sharper Image.
All Rights Reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:ae9f26a2-9a45-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:06 08:57:26Z
Create Date                     : 2017:07:06 08:57:26Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:ae9f26a2-9a45-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools
FCC ID Filing: GTOLBS85

Navigation menu