Linpa Technology LEB13 BT EARPHONE User Manual Use manual

Shenzhen Linpa Technology Co.,Ltd BT EARPHONE Use manual

Users Manual

LEB13;PBT90 user manual
1.Charging the bluetooth earphone
Connect the small end of the Micro USB cable to the charging port on the earphone. Connect the large end of the Micro
USB cable to your computers USB port or an AC adaptor(not included). The LED indicator light turns RED when
charging.It will turn Blue when fully charged.
When battery capacity less than 1%,the LED indicator will blink Red slowly(1 blink per second);if more than 1%,then it
will be red solid LED.
2.Pair the earphone with a bluetooth enabled device
Turn the earphone On by long press the power switch,a tone will be heard and the LED indicator light will alternately
flash RED and BLUE.
Keep your bluetooth earphone and bluetooth enabled device within 3feet of each other during the pairing process,set your
mobile phone or other bluetooth enabled device to search for Bluetooth devices.
When the bluetooth enabled device finds the headphone,select” PBT90” from the list of found devices.If required,enter the
password 0000.Select Ok or Yes to pair with your device.
After a successful registration,a tone will be heard and the LED indicator light will slowly blink BLUE.
Note: if you would like to connect the headphones to another device,you must unpair the headphones from the currently
paired device first.On your device’s bluetooth settings,select “PBT90”,then select “unpair”.When the headphones have
been unpaired,it automatically goes into pairing mode again.
3.power save mode
The earphone will be off automatically if not connected bluetooth within 2minutes after turn on.
While bluetooth disconnected,the earphone will be off automatically if not re-connect within 10 minutes.
During the pairing,the earphone will be kept standby until it’s out of battery
4. Location of Controls
A. Middle round button
ON/OFF:long press
play/pause: quick press
answer/end call:quick press
B .+ button:
previous song: quick press
increase volume:long press
C.”-” button:
next song:quick press
decrease volume:long press
D.Micro USB charging port
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Navigation menu